Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Diamond G60/F16-6T-N
Summary of Contents for Diamond G60/F16-6T-N
- Page 1 MOD : G60/F16-6T-N Production code : F60/60FRGV/2V8/T 02/2024...
- Page 2 FRYERS Installation-Use-Maintenance MOD. _60/30FRGV/1V8/T _65/40FRGV/1V8/T _70/40FRGV/1V13/P _60/60FRGV/2V8/T _65/70FRGV/2V8/T _70/70FRGV/2V13/P _60/30FRESE… _65/40FRESE… _70/40FRESE… _60/30FRES… _65/40FRES… _70/40FRES… _60/60FRESE… _65/70FRESE… _70/70FRESE… _60/60FRESE… _65/70FRES… _70/70FRES… Doc.n° MC16116150000 Edition...
-
Page 3: Table Of Contents
UK - INSTALLATION – USE - MAINTENANCE ..........................17 GENERAL PRESCRIPTIONS ..................................17 DISPOSAL OF PACKING AND OF THE APPLIANCE ................................18 SAFETY DEVICES..........................................18 INSTRUCTIONS FOR INSTALLATION ................................18 REMINDERS FOR THE INSTALLER ....................................18 REFERENCE STANDARDS AND LAWS .................................... 19 UNPACKING .......................................... -
Page 4: Installation - Use - Maintenance
UK - INSTALLATION – USE - MAINTENANCE RESTORE THE OIL BATH WHENEVER IT FALLS BELOW THE MIN. LEVEL, GENERAL PRESCRIPTIONS MARKED BY THE SPECIAL REFERENCE NOTCH. (DANGER OF FIRE). FOR BETTER PERFORMANCE OF THE READ THIS MANUAL CAREFULLY. IT APPLIANCE, REGULARLY CHANGE THE PROVIDES IMPORTANT INFORMATION OIL USED. -
Page 5: Disposal Of Packing And Of The Appliance
appliance is installed. Do not obstruct the vents THE DIFFERENTIATED COLLECTION OF THIS or ducts of this or other appliances. EQUIPMENT IS ORGANISED AND MANAGED BY THE PRODUCER. THE USER WHO INTENDS TO GET RID OF THIS EQUIPMENT SHALL CONTACT THE PRODUCER In the event of an appliance fault or malfunction, AND FOLLOW THE SYSTEM THAT THE LATTER shut the gas shut-off valve and/or switch the... -
Page 6: Reference Standards And Laws
- Position the appliance at least 10 cm from THE MANUFACTURER WILL NOT BE adjacent walls. LIABLE FOR ANY DAMAGE OR - If the appliance is to be be placed near walls, INJURY RESULTING FROM FAILURE dividers, kitchen furniture, decorative elements TO OBSERVING THE FOLLOWING etc. -
Page 7: Connections
THE SYMBOL “ HIGH VOLTAGE” IS 7. CONNECTIONS PLACED ON A PANEL THAT GIVES ACCESS TO A PART WITH HIGH VOLTAGE. The position and dimensions of connections are given in the installation diagram at the end of this manual. PROTECTIVE EARTH AND EARTH BONDING CONNECTIONS CONNECTION TO THE GAS SUPPLY Connect the appliance to an efficient ground... -
Page 8: Commissioning
- the nozzles and settings for each gas that can be - Switch on the appliance as directed in the used. instructions and reminders for use given in - For nozzles, the number indicated in table TAB1 Chapter “ INSTRUCTIONS FOR USE “ and check: - the gas supply pressure (see next Paragraph). -
Page 9: Fryer Use
Have the appliance serviced at least twice a year. Fill the well until the water is level with the The manufacturer recommends taking out a maximum level indicated on the wall of the well. service contract. Do not use the appliance with the water level above the maximum indicated level. -
Page 10: Minimum Temperature
Turn the lever clockwise. The drain is fully open when the handle is totally turned left. If is necessary empty the tank more times. FLOOR VERSION TANK FILLING AND EMPTYNG FILLING INTERMEDIATE TEMPERATURES - Turn handle of the drain valve anticlockwise. The drain is completely closed only when the handle is in the horizontal position. -
Page 11: Prolonged Disuse
The gas valve control knob has the following ELECTRIC FRYERS positions: BURNER IGNITION AND EXTINCTION The control knob has the following positions: PILOT IGNITION MINIMUM TEMPERATURE COOKING TEMPERATURES SWITCHING ON Turn the knob to the chosen temperature setting INTERMEDIATE TEMPERATURES for cooking. -
Page 12: Instructions For Maintenance
THE MANUFACTURER WILL NOT BE LIABLE FOR ANY DAMAGE OR INJURY READ THIS MANUAL CAREFULLY. IT RESULTING FROM FAILURE TO PROVIDES IMPORTANT INFORMATION OBSERVING THE FOLLOWING RULES. FOR SAFE INSTALLATION, USE AND MAINTENANCE OF THE APPLIANCE. THE MANUFACTURER WILL NOT BE Identify the specific appliance model. -
Page 13: Reminders For Replacing Components
DISCONNECT THE APPLIANCE ELECTRIC Defective gas tap or valve. SUPPLY, IF PRESENT, BEFORE Defective thermocouple or insufficient CARRYING OUT ANY OPERATION. heating. AFTER REPLACING AN ELECTRICAL Thermocouple incorrectly connected to gas SYSTEM COMPONENT, CHECK IT IS tap or valve. CORRECTLY WIRED. Knob of gas tap or valve not pressedsufficiently. -
Page 14: Cleaning The Interior
- disconnect the heating elements - Remove and replace the component. - Reassemble all parts. For assembly, proceed in reverse order. SOSTITUTION OF THE LAMP - Remove the control panel. - Remove and replace the component. - Reassemble all parts. For assembly, proceed in reverse order.
Need help?
Do you have a question about the G60/F16-6T-N and is the answer not in the manual?
Questions and answers