About Anynet; What Is Anynet; Connecting Anynet+ Devices - Samsung PL-42Q91HDP Owner's Instructions Manual

About Anynet +

What is Anynet + ?

Anynet+ is an AV network system that enables you to control all connected Samsung AV devices with your
Samsung TV's remote.
Connecting Anynet + Devices
The Anynet + system can be used only with Samsung AV devices that have the Anynet + feature. To be sure your
Samsung AV device has this feature, check if there is an Anynet + mark on it.
To directly connect to TV
TV
HDMI Cable
To connect to Home Theater
TV
Optical Cable
Connect the Optical cable between [Digital Audio Out (Optical)] on your TV and Digital Audio Input on the Home
➢
Theater.
Connect only one Home Theater.
➢
➢ You can listen to 5.1 channel sound through the home theater's speakers. Otherwise, you can only listen to 2 channel
stereo sound in other cases. Make sure to connect the Digital Audio IN (Optical) of the home theater and the TV
correctly to listen to TV sound through the home theater. However, you cannot listen to sound from the BD recorder
that is sent to the home theater via the TV in 5.1 channel sound because the TV outputs only 2 channel stereo sound.
Please see the manual for the home theater.
You can connect an Anynet + device using the HDMI cable. Some HDMI cables may not support Anynet + functions.
➢
Anynet + works when the AV device supporting Anynet + is in the Standby or On status.
➢
Anynet + supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
➢
Anynet + Device 1 Anynet + Device 2 Anynet + Device 3
HDMI Cable
HDMI Cable
Anynet + Device 1
HDMI Cable
Home Theater
HDMI Cable
Anynet + Device 2
HDMI Cable
Anynet + Device 3
HDMI Cable
English - 72
Connect the [HDMI 1], [HDMI 2]
or [HDMI 3] jack on the TV
and the HDMI OUT jack of the
corresponding Anynet + device
using the HDMI cable.
1. Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet +
device using the HDMI
cable.
2. Connect the HDMI IN jack
of the home theater and
the HDMI OUT jack of the
corresponding Anynet +
device using the HDMI
cable.