Subscribe to Our Youtube Channel
Related Manuals for Thermasol Signature Series
Summary of Contents for Thermasol Signature Series
- Page 1 SELECT SELECT STEAM STEAM SELECT SELECT STEAM STEAM Installation Manual For Tutorials and Troubleshooting visit www.thermasol.com/solutions From top - L to R: SET-XX Round, SEMR-XX Modern Recessed OVER 60 YEARS OF STEAM SHOWER INNOVATION...
- Page 2 NEVER ATTEMPT TO FILL AROMA RESERVOIR ON THE STEAMHEAD WHEN UNIT IS IN THE "ON" POSITION. SEVERE BURNS WILL OCCUR. DO NOT USE THERMASOL AROMATHERAPY OILS, SKIN CARE PRODUCTS OR ANY PRODUCT ASSOCIATED WITH YOUR THERMASOL UNIT WITHOUT CONSULTING WITH YOUR ALLERGIST OR DOCTOR BEFORE USE. THESE PRODUCTS MAY BE HAZARDOUS TO YOUR HEALTH.
-
Page 3: Tools And Materials
Signature Series Control Installation Instructions Tools and Materials Parts enclosed Controller Silicone Mud Ring Installation instructions, warranty, (Contemporary style shown here) 04-8509-1 static cling warning label Materials needed: Tools needed: Signature Series control 1/2” drill for surface mount CAN-Bus Cable... - Page 4 Signature Series Control Installation Instructions Control Installation and Data Cable Connection Back of Control Route the data cable (included with generator) through the finished wall to the back side of the control. The other end of the cable runs to the steam generator location or if present to PDM.
- Page 5 Signature Series Control Installation Instructions Mud Ring Installation + Sealing Control For Recessed Controls Only (SEMR-XX) Silicone (included) Recessed Control (shown) Data Cable Step 1: BEFORE TILE - Use the Step 2: Once finished tile is com- Step 3: IMPORTANT: Fully test the control supplied mud ring by attaching to pleted remove mud ring from wall.
- Page 6 Signature Series Control Installation Instructions Steam Line and Steamhead Now you will need to decide on the steamhead placement in the shower so you can run the steam line from the generator to the steamhead. There are a couple of things you need to know about the placement of the steamhead and steam line itself.
- Page 7 Signature Series Control Installation Instructions Steamhead Location DO NOT install the steamhead near the seating area or the user. DO NOT forget to install the steamhead rough-in fitting! important that the pipe is firmly secured to the wall, so Install the steamhead 24" from the floor or bathtub rim that when the steamhead is installed it doesn’t push the...
- Page 8 Verify control panel lights up and test operation. Note: Initial power-on phase takes several minutes for generator to heat up steam. Please direct the home owner to visit www.thermasol.com/solution and click on the “I’m the home owner” button to learn about set-up and programing (in order to set up the clock and any other options if applicable).
-
Page 9: Operation
Operation For More Operating Interactive Instructions please visit: www.thermasol.com/solutions Taking a Steam Bath On your ThermaSol Signature Series Control, touch and release the power icon to power on. To turn off the steam unit touch and release the power icon once. -
Page 10: Trouble Shooting And Error Codes
Signature Series Control Installation Instructions Trouble Shooting and Error Codes Visit www.thermasol.com/solutions. Click on Troubleshoot then click on Signature Series Control Error Codes Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. - Page 11 Signature Series Control Installation Instructions Notes: Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 12 1958 STEAM WAY ROUND ROCK, TX 78665 PHONE: 800.776.0711 | SUPPORT@THERMASOL .COM | WWW.THERMASOL .COM WWW.THERMASOL .COM/SOLUTIONS 81173_A...
Need help?
Do you have a question about the Signature Series and is the answer not in the manual?
Questions and answers