Related Manuals for Thermasol SignaTouch STCX Series
Summary of Contents for Thermasol SignaTouch STCX Series
- Page 1 Installation Manual For Tutorials and Troubleshooting visit www.thermasol.com/solutions STCX-XXX OVER 60 YEARS OF STEAM SHOWER INNOVATION...
- Page 2 NEVER ATTEMPT TO FILL AROMA RESERVOIR ON THE STEAMHEAD WHEN UNIT IS IN THE "ON" POSITION. SEVERE BURNS WILL OCCUR. DO NOT USE THERMASOL AROMATHERAPY OILS, SKIN CARE PRODUCTS OR ANY PRODUCT ASSOCIATED WITH YOUR THERMASOL UNIT WITHOUT CONSULTING WITH YOUR ALLERGIST OR DOCTOR BEFORE USE. THESE PRODUCTS MAY BE HAZARDOUS TO YOUR HEALTH.
-
Page 3: Tools And Materials
5.7" W by 3.9" opening for recessed mount STC-XXX Mud Ring SignaTouch control can be installed vertically or horizontally Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711... - Page 4 Connect the data cable to Power Distribution Module (PDM). (The other end of the cable runs to the back of the control in the shower location.) Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 5 Be careful not to harm the wall or control with the tape. Let dry for 24 hours before using steam bath. Back Side of Control Side View of Control Vertical Install Vertical Install Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 6 Connecting SignaTouch to the Generator M8 Cable Connecting SignaTouch to Serenity Light, Sound, Rainhead (if applicable) M12 Cable 110v M8 Cable Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 7 Connecting SignaTouch to Digital Shower 110v M12 Cable M8 Cable Connecting Total Wellness Package 110v M12 Cable M8 Cable M8 Cable Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 8 Shown installed in attic Steam Line 6" 24" Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 9 1" socket and driver Steamhead rough-in fitting to be installed flush and sealed to finished wall Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details. THERMASOL.COM 800.776.0711...
- Page 10 Verify control panel lights up and test operation. Note: Initial power-on phase takes several minutes for generator to heat up steam. Please direct the home owner to visit www.thermasol.com/solution and click on the “I’m the home owner” button to learn about set-up and programing (in order to set up the clock and any other options if applicable).
- Page 11 SignaTouch Control Installation Instructions Trouble Shooting, Tutorials and Error Codes Visit www.thermasol.com/solutions. Click on Troubleshoot then click on SignaTouch Control Error Codes. Read warnings on page 2. For illustrative purposes only. Consult with qualified professional for steam room construction details.
- Page 12 ThermaSol uses the following open source project: Qt5-GUI Framework-www.qt.io-LGPLv3 1958 STEAM WAY ROUND ROCK, TX 78665 PHONE: 800.776.0711 | FAX: 800.556.5257 | WWW.THERMASOL.COM 81220_NC...
Need help?
Do you have a question about the SignaTouch STCX Series and is the answer not in the manual?
Questions and answers