Troubleshooting - Haier BC-100G User Manual

1. Loosen the lug slightly and remove the lampshade. (Step 1)
2. Remove the U lamp tube from the holder. (Step 2)
3. Place a new lamp tube to the holder. (Step 3)
4. Replace the lampshade. (Step 4)

Troubleshooting

Cabinet does not operate.
Verify if the cabinet is properly plugged in.
Verify if the power is supplied.
Inside temperature appears too high.
Frequent door openings.
Short storage period
Verify if the gaskets is in good condition
The condenser coils need cleaning.
Verify if the thermostat is properly adjusted.
Wine temperature is too cold.
Verify if temperature control setting is too cold.
Cabinet runs too frequently.
This may be normal to maintain constant temperature during high temperature and
humid days.
Doors may have been opened frequently or for an extended period of time.
Clean condenser coils.
Check gasket for proper seal.
Check to see if doors are completely closed.
Moisture buildup on interior or exterior of the cabinet.
This is normal during high humidity periods.
Prolonged or frequent door openings.
Check door gaskets for proper seal.
Cabinet door does not shut properly.
Level the cabinet.
Check for blockages e.g. beverage bottles, shelves.