HP 8153A Operating And Programming Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Multimeter
  5. 8153A
  6. Operating and programming manual
HP 8153A Operating And Programming Manual

HP 8153A Operating And Programming Manual

Lightwave
Hide thumbs Also See for 8153A:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating and Programming Manual
HP 8153A Lightwave Multimeter
ABCDE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8153A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HP 8153A

Summary of Contents for HP 8153A

  • Page 1 Operating and Programming Manual HP 8153A Lightwave Multimeter ABCDE...
  • Page 2 During the warranty incidental, or consequential without the prior written consent of period, HP will, at its option, either damages whether based on contract, Hewlett-Packard GmbH. repair or replace products which tort, or any other legal theory.

  • Page 3: Safety Considerations

    Safety Considerations Warning Line Power Requirements Line Power Cable...
  • Page 4 Warning...
  • Page 5 Operating Environment Warning Input/Output Signals Caution...
  • Page 6 Initial Safety Information for Laser Source Modules > > > > Note Note MUST...
  • Page 7 MUST Warning Warning Warning Warning...
  • Page 8 Sicherheitsinformation f  ur Laser Quellen > > > > Hinweis viii...
  • Page 9 Warnung Warnung Warnung Warnung...
  • Page 10 Informations et Consignes de S  ecurit  e Relatives  a l'Utilisation des Lasers. > > > > Remarque Remarque...
  • Page 11 Attention Attention Attention Attention...
  • Page 12 Lasers  akerhet Bruksanvisningar Varning...
  • Page 13 Underh  all xiii...
  • Page 14 Laserturvallisuus K  aytt  o Varoitus...
  • Page 15 Huolto...
  • Page 16 Introduction...
  • Page 17 Contents Contents-1...
  • Page 18 Contents-2...
  • Page 19 Contents-3...
  • Page 20 Contents-4...
  • Page 21 < > < > < > < > < > < > < > < > < > Contents-5...
  • Page 22 Contents-6...
  • Page 23 Contents-7...
  • Page 24 Contents-8...
  • Page 25 Contents-9...
  • Page 26 Contents-10...
  • Page 27 Contents-11...
  • Page 28 Figures Average Contents-12...
  • Page 29 Average > Average > Average Contents-13...
  • Page 30 Tables STATus STATus STATus DISPlay SENSe SOURce SYSTem PROGram STATus STATus Contents-14...

  • Page 31: Getting Started

    Getting Started The HP 8153A System Getting Started 1-1...
  • Page 32 A Quick Overview The Keyboard Chan Mode Chan Mode Measure Mode Param 1-2 Getting Started...
  • Page 33 Disp dBm/W Zero N Dig Auto Down Menu Mode Edit Prev Next Exec Pause System Loss Loss Getting Started 1-3...
  • Page 34 Record T_TOTAL AUTODUMP SAMPLES AUTODUMP START THRESHLD Exec AUTOSCAL Y_MIN Y_MAX COMMENT More 1-4 Getting Started...
  • Page 35 TYPE DELTA MAXPOWER Pause Getting Started 1-5...
  • Page 36 The Display NNNNNNNN NNNNNNNNNNNNNN Mode NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN TLK ONLY NNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNN Low Batt 1-6 Getting Started...
  • Page 37 A/REF B/REF AUTO APPL EDIT PAUSE NNNNNNNNNNNNNNNNN Param Getting Started 1-7...

  • Page 38: A Sample Session

    A Sample Session Hardware Setup Switching On and Recalling the Standard Setting SELFTEST 1-8 Getting Started...
  • Page 39 MENU Mode MENU MENU SYS System RECALL MENU SYS EDIT Edit RECALL Exec RECALL Exec Mode Making A Power Measurement Note Getting Started 1-9...
  • Page 40 Param Zero ZEROING ---- 1-10 Getting Started...

  • Page 41: Logging Data

    Logging Data Menu MENU MENU APPL Record STABILTY Record LOGGING Getting Started 1-11...

  • Page 42: Examining The Data

    EDIT Edit SAMPLES AUTODUMP Next START Next IMMEDIAT LOGGING Edit Exec Examining the Data SHOW More MAXIMUM Edit MINIMUM Next DIFF Next AVERAGE Next Next 1-12 Getting Started...

  • Page 43: Plotting Data

    Edit SHOW Plotting Data NNNNNNNNNNNNNNNNNNNNNNNNNN TLK ONLY HPIB System ADDRESS Edit MODE Next TLK LSTN TLK ONLY HPIB Edit Getting Started 1-13...
  • Page 44 PLOT Record AUTOSCAL Edit COMMENT Next PLOT Edit Exec 1-14 Getting Started...

  • Page 45: Measure Mode

    Measure Mode MEAS The Chan Key Chan Note Local The Mode Key Mode Note Local Control - Measure Mode 2-1...

  • Page 46: Default Values

    The Param Key Param Param Entry Status Note Default Values Param Parameter List 2-2 Local Control - Measure Mode...
  • Page 47 nnnn.n CAL dB measured input measured input nnn.nnn nnn.nnn Local Control - Measure Mode 2-3...
  • Page 48 Average sample sample Sample sample ms s min 2-4 Local Control - Measure Mode...
  • Page 49 dBm W display measured display measured nnn.nnn nnn.nnn Local Control - Measure Mode 2-5...
  • Page 50 AT T dB output source output source 2-6 Local Control - Measure Mode...
  • Page 51 The Disp Ref Key measured measured display display Local Control - Measure Mode 2-7...
  • Page 52 The dB Key Using with a Two Sensor Instrument A/REF B/REF Param Param Disp display measured display measured display measured st Chan measured nd Chan display measured 2-8 Local Control - Measure Mode...
  • Page 53 Using with a One Sensor Instrument A/REF B/REF Param Param Disp display measured display measured The dBm/W Key dBm W dBm W dBm W The Zero Key Zero Zero Zero Local Control - Measure Mode 2-9...
  • Page 54 Note ZERO ERR 2-10 Local Control - Measure Mode...
  • Page 55 The N Dig Key N Dig N Dig The Range Keys Local Control - Measure Mode 2-11...
  • Page 56 Auto Down 2-12 Local Control - Measure Mode...
  • Page 57 The Auto Key Auto AUTO The Up Key Example The Down Key Example Down The Analog Output Down Local Control - Measure Mode 2-13...
  • Page 58 The Modify Keys Editing Discrete Valued Parameters Example Editing Continuous Valued Parameters Editing Units 2-14 Local Control - Measure Mode...
  • Page 59 Example Local Control - Measure Mode 2-15...

  • Page 61: Menu Mode

    Menu Mode MENU The Chan Key Chan Note Local The Mode Key Mode Note Local Control - Menu Mode 3-1...
  • Page 62 The System Key System The Modify Keys The Loss Key Loss Loss Preparation 3-2 Local Control - Menu Mode...
  • Page 63 Running the Loss Application Loss CONFIG ? APPL LOSS Exec Local Control - Menu Mode 3-3...
  • Page 64 Warning Note 3-4 Local Control - Menu Mode...
  • Page 65 Exec The Record Key Record Exec Local Control - Menu Mode 3-5...
  • Page 66 Preparation Note 3-6 Local Control - Menu Mode...

  • Page 67: The Stability Application

    Record Record Next Prev Record Next Prev APPL The Stability Application Example STABILTY Local Control - Menu Mode 3-7...
  • Page 68 T_TOTAL AUTODUMP Edit Edit EDIT Next Prev T TOTAL T_TOTAL T_TOTAL T_TOTAL Edit Next Prev AUTODUMP AUTODUMP Note AUTODUMP 3-8 Local Control - Menu Mode...
  • Page 69 PLOTTER PRINTER Edit Next Prev Running the Stability Application Exec Pause Pause Next Prev Exec Local Control - Menu Mode 3-9...

  • Page 70: The Logging Application

    The Logging Application LOGGING SAMPLES AUTODUMP START THRESHLD Edit Edit EDIT Next Prev SAMPLES SAMPLES 3-10 Local Control - Menu Mode...
  • Page 71 Edit Next Prev AUTODUMP AUTODUMP Note AUTODUMP Local Control - Menu Mode 3-11...
  • Page 72 PLOTTER PRINTER Edit Next Prev START START Exec IMMEDIAT ABOVE Exec BELOW Edit Next Prev THRESHLD START ABOVE BELOW THRESHLD Edit Next Prev 3-12 Local Control - Menu Mode...
  • Page 73 Running the Logging Application Exec Pause Pause Next Prev Exec The Manual Logging Application Exec MAN LOGG Edit Edit EDIT Exec Edit Running the Manual Logging Application Exec Exec Example Local Control - Menu Mode 3-13...
  • Page 74 Exec The Plot Application Note PLOT AUTOSCAL Y_MIN Y_MAX COMMENT Edit Edit EDIT Next Prev 3-14 Local Control - Menu Mode...
  • Page 75 AUTOSCAL AUTOSCAL Edit Next Prev Y MIN AUTOSCAL Y_MIN Edit Next Prev Y MAX AUTOSCAL Y_MAX Edit Next Prev Local Control - Menu Mode 3-15...
  • Page 76 COMMENT COMMENT Note COMMENT ! ? . , : ; & | @ # $ % * [ ] Edit Next Prev Running the Plot Application Exec NO DATA DATA ? ABORTED Exec Reading the Plot STABILITY LOGGING MAN LOGG 3-16 Local Control - Menu Mode...
  • Page 77 T avg Cal Fact Reference T total Samples Local Control - Menu Mode 3-17...
  • Page 78 Diff Note 3-18 Local Control - Menu Mode...
  • Page 79 The Print Application Note PRINT AUTOSCAL Y_MIN Y_MAX COMMENT Local Control - Menu Mode 3-19...
  • Page 80 Edit Edit EDIT Next Prev AUTOSCAL AUTOSCAL Note AUTOSCAL Edit Next Prev Y MIN AUTOSCAL Y_MIN Note Y_MIN 3-20 Local Control - Menu Mode...
  • Page 81 Edit Next Prev Y MAX AUTOSCAL Y_MAX Note Y_MAX Edit Next Prev COMMENT COMMENT Note COMMENT ! ? . , : ; & | @ # $ % * [ ] Edit Next Prev Local Control - Menu Mode 3-21...
  • Page 82 Running the Print Application Exec NO DATA DATA ? ABORTED Exec Reading the Printout 3-22 Local Control - Menu Mode...
  • Page 83 STABILITY LOGGING MANUAL LOGGING Local Control - Menu Mode 3-23...
  • Page 84 Ch. A (Absolute) B / REF T avg Cal Fact Reference T total Samples Diff Note 3-24 Local Control - Menu Mode...
  • Page 85 The MinMax Applications Note Local Control - Menu Mode 3-25...
  • Page 86 Note 3-26 Local Control - Menu Mode...
  • Page 87 MODE CONT WINDOW REFRESH SAMPLES Running the MinMax Application Exec Edit Pause Pause Exec Local Control - Menu Mode 3-27...
  • Page 88 The More Key More More Next More Prev More Next The Show Application SHOW Edit EDIT Prev Next MAXIMUM MAXIMUM MINIMUM MINIMUM 3-28 Local Control - Menu Mode...
  • Page 89 DIFF DIFF AVERAGE AVERAGE Note The Alignment Application Preparation Local Control - Menu Mode 3-29...
  • Page 90 ALIGNMNT TYPE DELTA MAXPOWER Edit Edit EDIT Next Prev TYPE TYPE AUTO MANUAL 3-30 Local Control - Menu Mode...
  • Page 91 Edit Next Prev DELTA DELTA Edit Next Prev MAXPOWER TYPE MANUAL MAXPOWER Edit Next Prev Running the Alignment Application Exec TYPE AUTO TYPE MANUAL MAXPOWER Local Control - Menu Mode 3-31...
  • Page 92 DELTA DELTA DELTA DELTA DELTA MAXPOWER Example Pause 3-32 Local Control - Menu Mode...
  • Page 93 Exec Local Control - Menu Mode 3-33...

  • Page 95: System Mode

    System Mode MENU SYS The Mode Key Mode Note The Modify Keys Local Control - System Mode 4-1...
  • Page 96 The System Key System Next System Prev System Next Note RECALL RECALL Edit MENU SYS EDIT EXEC 4-2 Local Control - System Mode...
  • Page 97 The Module Type MISMATCH The Location The Channel Local Control - System Mode 4-3...
  • Page 98 MISMATCH RECALL '54 3 Example Exec STORE STORE Edit MENU SYS EDIT EXEC 4-4 Local Control - System Mode...
  • Page 99 The Module Type The Channel The Location STORE '54 3 Example Exec HPIB HPIB ADDRESS MODE LANGUAGE Edit Edit Next Prev MENU SYS EDIT ADDRESS ADDRESS Local Control - System Mode 4-5...
  • Page 100 MODE MODE MODE TLK LSTN TLK ONLY Exec TLK ONLY Exec LANGUAGE LANGUAGE LANGUAGE TMSL HP 8152 Exec Exec 4-6 Local Control - System Mode...
  • Page 101 DISPLAY DISPLAY BRIGHT Edit MENU SYS EDIT BRIGHT BRIGHT DATETIME DATETIME MM/DD/YY HH:MM:SS Local Control - System Mode 4-7...
  • Page 102 Edit Edit Next Prev MENU SYS EDIT MM/DD/YY MM/DD/YY HH:MM:SS HH:MM:SS Example Next 4-8 Local Control - System Mode...
  • Page 103 Programming the HP 8153A Introduction Tutorial Description of Hewlett-Packard Interface IEEE Standard 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation IEEE Standard 488.2-1987, IEEE Standard Codes, Formats, Protocols and Common Commands For Use with ANSI/IEEE Std 488.1-1987 Remote Operation 5-1...
  • Page 104 The HP 8153A HP-IB Capabilities Mnemonic Function Complete source handshake capability Complete acceptor handshake capability Basic talker; serial poll; unaddressed to talk if addressed to listen; no talk only Basic listener; unaddressed to listen if addressed to talk; no listen only...
  • Page 105 NNNNNNNNNNN NNNNNNNNNNNNNN ONLY The Parser Parser Type Synchronization *OPC *OPC? *WAI Remote Operation 5-3...

  • Page 106: Accepted Characters

    Note Clearing the Input Queue Accepted Characters HP-IB Bus Commands 5-4 Remote Operation...
  • Page 107 Remote Operation 5-5...
  • Page 108 HP-IB Priority Local Menu ZEROING TMSL Beginners Guide to SCPI Standard Commands for Programmable Instruments 5-6 Remote Operation...
  • Page 109 SOURce Example SOURce SOURce SOURce 1 :INTernal :FREQuency < > < > :FREQuency? :POWer :ATTenuation 1 < > < > :ATTenuation 1 :STATe < > :STATe? :WAVElength UPPer LOWer BOTH :WAVElength? SOURCE:POWER:STATE Example SOURCE:AM:INTERNAL:FREQUENCY CW Example SOUR:POW:ATT 1.0; STAT ON; WAVE LOW Remote Operation 5-7...

  • Page 110: Setting The Hp-Ib Address

    SOURCE:POWER:ATTENUATION 1.0 SOURCE:POWER:STATE ON SOURCE:POWER:WAVELENGTH LOWER Example SOURCE:POWER:STATE ON source:power:state on sour:pow:stat on Setting the HP-IB Address 5-8 Remote Operation...

  • Page 111: Syntax Diagram Conventions

    Syntax Diagram Conventions < > DB DBM W MW NM Remote Operation 5-9...
  • Page 112 < > number number number 5-10 Remote Operation...
  • Page 113 number number number Remote Operation 5-11...

  • Page 115: Common Commands

    Common Commands Common Status Information IEEE Standard 488.2-1987 Remote Operation - Common Commands 6-1...
  • Page 116 Note 6-2 Remote Operation - Common Commands...
  • Page 117 SRQ, The Service Request Input Queue Output Queue Error Queue < > Remote Operation - Common Commands 6-3...
  • Page 118 *CLS *ESE *ESE? *ESR? *IDN? *OPC *OPC? *RST *SRE *SRE? *STB? *TRG *TST? *WAI *CLS *CLS *CLS *CLS *OPC *OPC? 6-4 Remote Operation - Common Commands...
  • Page 119 OUTPUT 722;"*CLS" *ESE *ESE < > < > *ESE *RST *CLS *ESE? OUTPUT 722;"*ESE 21" Remote Operation - Common Commands 6-5...
  • Page 120 *ESE? *ESE? < > *ESE? *ESE OUTPUT 722;"*ESE?" ENTER 722; A$ *ESR? *ESR? < > 6-6 Remote Operation - Common Commands...
  • Page 121 *ESR? OUTPUT 722;"*ESR?" ENTER 722; A$ *IDN? *IDN? HEWLETT-PACKARD, 8153A, 0, 1.0 Remote Operation - Common Commands 6-7...
  • Page 122 HEWLETT-PACKARD 8153A *IDN? *OPT? DIM A$ [30] OUTPUT 722;"*IDN?" ENTER 722; A$ *OPC *OPC *OPC *OPC *CLS *RST *OPC? *WAI OUTPUT 722;"*CLS;*ESE 1;*SRE 32" OUTPUT 722;"*OPC" 6-8 Remote Operation - Common Commands...
  • Page 123 *OPC? *OPC? < > *OPC? *OPC? *CLS *RST *OPC *WAI OUTPUT 722;"*OPC?" ENTER 722;A$ ENTER ENTER *OPT? *OPT? < > , < > Remote Operation - Common Commands 6-9...
  • Page 124 EMPTY *OPT? *IDN? DIM A$ [20] OUTPUT 722;"*OPT?" ENTER 722; A$ HP81554SM,HP 81530A *RST *RST *RST *OPC *OPC? *RST 6-10 Remote Operation - Common Commands...
  • Page 125 DISPlay:BRIGhtness DISPlay:STATe SENSe:POWer:ATIME SENSe:POWer:RANGe:AUTO SENSe:POWer:WAVElength SENSe:POWer:REFerence SENSe:POWer:REFerence SENSe:POWer:REFerence SENSe:POWer:REFerence:STATe SENSe:POWer:REFerence:STATe:RATIo SENSe:POWer:UNIT SENSe:CORRection ABORt ABORt2 INITiate:CONTinuous INITiate2:CONTinuous SOURce:AM:INTernal:FREQuency SOURce:POWer:ATTenuation SOURce:POWer:ATTenuation2 SOURce:POWer:STATe SOURce:POWer:WAVElength OUTPUT 722;"*RST" *SRE *SRE < > < > *SRE *RST *CLS Remote Operation - Common Commands 6-11...
  • Page 126 *SRE? *STB? OUTPUT 722;"*SRE 48" *SRE? *SRE? *SRE? *SRE *STB? OUTPUT 722;"*SRE?" ENTER 722; A$ 6-12 Remote Operation - Common Commands...
  • Page 127 *STB? *STB? < > *STB? STATus *STB? *SRE *SRE? OUTPUT 722;"*STB?" ENTER 722; A$ Remote Operation - Common Commands 6-13...
  • Page 128 *TRG *TRG *TRG GET INIT INIT:CONT INIT:CONT? OUTPUT 722;"*TRG" *TST? *TST? < > *TST? OUTPUT 722;"*TST?" ENTER 722; A$ *WAI *WAI *WAI 6-14 Remote Operation - Common Commands...
  • Page 129 *OPC *OPC? OUTPUT 722;"*WAI" Remote Operation - Common Commands 6-15...

  • Page 131: The Status Registers

    HP-IB Status Commands The Status Registers Note Remote Operation - Status Commands 7-1...
  • Page 132 The Condition Registers The Transition Filters The Event Registers The Enable Registers 7-2 Remote Operation - Status Commands...
  • Page 133 The Status Commands Note < > Note STATUS:OPERATION:SETTLING:EVENT? STAT:OPER:SETT:EVEN? STAT:OPER:SETT:EVEN? stat:oper:sett:even? STATus:PRESet STATus:PRESet Note Remote Operation - Status Commands 7-3...
  • Page 134 < > OUTPUT 722;"STAT:PRES" < > STATus: node :CONDition? STATus: < > :CONDition? < > 7-4 Remote Operation - Status Commands...
  • Page 135 OUTPUT 722;"STAT:OPER:TRIG:POW:COND?" ENTER 722;A$ < > STATus: node :ENABle STATus: < > :ENABle < > STAT: < > :ENAB? OUTPUT 722;"STAT:OPER:TRIG:POW:ENAB 3" < > STATus: node :ENABle? STATus: < > :ENABle? < > STAT: < > :ENAB OUTPUT 722;"STAT:QUES:POW:ENAB?" ENTER 722;A$ <...
  • Page 136 OUTPUT 722;"STAT:OPER:SETT:EVEN?" ENTER 722;A$ < > STATus: node :NTRansition STATus: < > :NTRansition < > STAT: < > :NTR? OUTPUT 722;"STAT:QUES:POW:OVERR:NTR 3" < > STATus: node :NTRansition? STATus: < > :NTRansition? < > STAT: < > :NTR OUTPUT 722;"STAT:QUES:ISUM:INST1:NTR?" ENTER 722;A$ <...
  • Page 137 STAT: < > :PTR? OUTPUT 722;"STAT:QUES:POW:PTR 3" < > STATus: node :PTRansition? STATus: < > :PTRansition? < > STAT: < > :PTR OUTPUT 722;"STAT:QUES:POW:OVERR:PTR?" ENTER 722;A$ The Operation Status Remote Operation - Status Commands 7-7...
  • Page 138 7-8 Remote Operation - Status Commands...
  • Page 139 The Operation Status Commands STATus :CONDition? :ENABle :ENABle? < > :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :OPERation :SETTling :LPELTier :HPELTier :MEASuring :POWer :TRIGger :POWer :CORRecting :ZERO :AVERaging :POWer :PROGram : < > Remote Operation - Status Commands 7-9...
  • Page 140 The OPERation node Note 7-10 Remote Operation - Status Commands...
  • Page 141 The OPERation:SETTling Node The OPERation:SETTling:LPELTier Node The OPERation:SETTling:HPELTier Node The OPERation:MEASuring Node The OPERation:MEASuring:POW er Node Remote Operation - Status Commands 7-11...
  • Page 142 The OPERation:TRIGger Node The OPERation:TRIGger:POW er Node The OPERation:CORRecting Node The OPERation:CORRecting:ZERO Node The OPERation:AVERaging Node The OPERation:A VERaging:POW er Node 7-12 Remote Operation - Status Commands...
  • Page 143 The OPERation:PROGram Node < > < > The OPERation:PROGram: application Node The Questionable Status Remote Operation - Status Commands 7-13...
  • Page 144 7-14 Remote Operation - Status Commands...
  • Page 145 The Questionable Status Commands STATus :CONDition? :ENABle :ENABle? < > :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :QUEStionable :POWer :OVERRange :LCURRent :HCURRent :LMONitor :HMONitor :ENVTemp :ISUMmary :INSTrument 1 :POWer Remote Operation - Status Commands 7-15...
  • Page 146 The QUEStionable node Note 7-16 Remote Operation - Status Commands...
  • Page 147 The QUEStionable:POWer Node The QUEStionable:POW er:OVERRange Node The QUEStionable:POW er:LCURRent Node Remote Operation - Status Commands 7-17...
  • Page 148 The QUEStionable:POW er:HCURRent Node The QUEStionable:POW er:LMONitor Node The QUEStionable:POW er:HMONitor Node The QUEStionable:POW er:ENVT emp Node 7-18 Remote Operation - Status Commands...
  • Page 149 The QUEStionable:ISUMmary Node The QUEStionable:ISUMmary:INSTrument[1 2] Node Remote Operation - Status Commands 7-19...
  • Page 150 The Source Status The Source Status Commands The following are the source status 7-20 Remote Operation - Status Commands...
  • Page 151 STATus > STATus > :SOURce > :CONDition? > :ENABle > :ENABle? < > > :EVENt ? > :NTRansition < > > :NTRansition? > :PTRansition < > The SOURce node Note Remote Operation - Status Commands 7-21...

  • Page 153: Abort Commands

    HP-IB Commands ABORt Commands ABORt 1 Specifying the Channel ABORt1 ABORt2 ABORt ABORt 1 INIT:IMM INIT:CONT INIT:CONT? OUTPUT 722;"ABOR" Remote Operation - Commands 8-1...

  • Page 154: Display Commands

    DISPlay Commands DISPlay DISPlay :BRIGhtness < > :BRIGhtness? < > :STATe :STATe ? DISPlay:BRIGhtness DISPlay:BRIGhtness < >< > *RST DISP:BRIG? DISP:STAT DISP:STAT? OUTPUT 722;"DISP:BRIG 0.5" DISPlay:BRIGhtness? DISPlay:BRIGhtness? < > 8-2 Remote Operation - Commands...
  • Page 155 DISP:BRIG DISP:STAT DISP:STAT? OUTPUT 722;"DISP:BRIG?" ENTER 722;A$ DISPlay:STATe DISPlay :STATe < >< > DISP:STAT ON DISP:STAT OFF *RST DISP:BRIG DISP:BRIG? DISP:STAT? OUTPUT 722;"DISP:STAT ON" DISPlay:STATe? DISPlay :STATe ? < > DISP:BRIG DISP:BRIG? DISP:STAT OUTPUT 722;"DISP:STAT?" ENTER 722;A$ Remote Operation - Commands 8-3...

  • Page 156: Fetch Commands

    FETCh Commands FETCh 1 :SCALar :POWER :DC ? Specifying the Channel FETCh FETCh1 FETCh2 FETCh[:SCALar]:POWer[:DC] FETCh 1 2 :SCALar :DC ? < > 8-4 Remote Operation - Commands...
  • Page 157 Average sample sample Sample sample Average Average > Average Remote Operation - Commands 8-5...
  • Page 158 Average sample sample Sample sample > Average READ:SCAL:POW:DC? SENS:POW:REF:STAT SENS:POW:REF:STAT? SENS:POW:UNIT SENS:POW:UNIT? INIT:IMM INIT:CONT INIT:CONT? OUTPUT 722;"FETC:POW?" ENTER 722;A$ 8-6 Remote Operation - Commands...

  • Page 159: Initiate Commands

    INITiate Commands INITiate 1 :CONTinuous < > :CONTinuous? :IMMediate Specifying the Channel INITiate1 INITiate2 INITiate:CONTinuous INITiate 1 < >< > ABOR INIT:IMM INIT:CONT? OUTPUT 722;"INIT1:CONT OFF" INITiate:CONTinuous? INITiate 1 < > ABOR INIT:IMM INIT:CONT Remote Operation - Commands 8-7...

  • Page 160: Read Commands

    OUTPUT 722;"INIT:CONT?" ENTER 722;A$ INITiate[:IMMediate] INITiate 1 ABOR INIT:CONT INIT:CONT OUTPUT 722;"INIT2" READ Commands READ 1 :SCALar :POWER :DC ? Specifying the Channel READ READ1 READ2 READ[:SCALar]:POWer[:DC] READ 1 2 :SCALar :DC ? < > 8-8 Remote Operation - Commands...

  • Page 161: Sense Commands

    FETC:SCAL:POW:DC? INIT INIT:CONT INIT:CONT? SENS:POW:REF:STAT SENS:POW:REF:STAT? SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"READ:POW?" ENTER 722;A$ SENSe Commands Remote Operation - Commands 8-9...
  • Page 162 SENSe SENSe 1 :CORRection :COLLect :ZERO :ZERO? :LOSS :INPut < > :MAGNitude :MAGNitude :POWer :ATIME < > < > :ATIME? :RANGe :AUTO < > :AUTO? :UPPER < > < > :UPPER ? :REFerence TOREF 2, < > < > :REFerence? TOREF :DISPlay TOREF...
  • Page 163 Specifying the Channel SENSe SENSe1 SENSe2 SENSe:CORRection:COLLect:ZERO SENSe 1 SENS:CORR:COLL:ZERO? OUTPUT 722;"SENS2:CORR:COLL:ZERO" SENSe:CORRection:COLLect:ZERO? SENSe 1 < > SENS:CORR:COLL:ZERO OUTPUT 722;"SENS2:CORR:COLL:ZERO?" ENTER 722;A$ SENSe:CORRection[:LOSS[:INPut[:MAGNitude]]] SENSe 1 :LOSS :INPut :MAGNitude < >< > < > Remote Operation - Commands 8-11...
  • Page 164 SENS:CORR:LOSS:INP:MAGN? OUTPUT 722;"SENS2:CORR:LOSS:INP:MAGN 10DB" SENSe:CORRection[:LOSS[:INPut[:MAGNitude]]]? SENSe 1 :LOSS :INPut :MAGNitude ? < > SENS:CORR:LOSS:INP:MAGN OUTPUT 722;"SENS2:CORR:LOSS:INP:MAGN?" ENTER 722;A$ SENSe:POWer:ATIME SENSe 1 < >< > < > SENS:POW:ATIME? OUTPUT 722;"SENS:POW:ATIME 200MS" 8-12 Remote Operation - Commands...
  • Page 165 SENSe:POWer:ATIME? SENSe 1 < > SENS:POW:ATIME OUTPUT 722;"SENS2:POW:ATIME?" ENTER 722;A$ SENSe:POWer:RANGe:AUTO SENSe 1 < >< > POW:RANG SENS:POW:RANG:UPPER SENS:POW:RANG:UPPER? SENS:POW:RANG:AUTO? OUTPUT 722;"SENS1:POW:RANG:AUTO OFF" SENSe:POWer:RANGe:AUTO? SENSe 1 < > Remote Operation - Commands 8-13...
  • Page 166 SENS:POW:RANG:UPPER SENS:POW:RANG:UPPER? SENS:POW:RANG:AUTO OUTPUT 722;"SENS2:POW:RANG:AUTO?" ENTER 722;A$ SENSe:POWer:RANGe[:UPPER] SENSe 1 < >< > < > < < 8-14 Remote Operation - Commands...
  • Page 167 SENS:POW:RANG:UPPER? SENS:POW:RANG:AUTO SENS:POW:RANG:AUTO? OUTPUT 722;"SENS1:POW:RANG:UPPER -20DBM" Remote Operation - Commands 8-15...
  • Page 168 SENSe:POWer:RANGe[:UPPER]? SENSe 1 < > SENS:POW:RANG:UPPER SENS:POW:RANG:AUTO SENS:POW:RANG:AUTO? OUTPUT 722;"SENS1:POW:RANG:UPPER?" ENTER 722;A$ SENSe:POWer:REFerence SENSe 1 < > TOA 2, < > < > TOREF TOREF Watt Result dB Measured dBm Reference dBm TOREF 8-16 Remote Operation - Commands...
  • Page 169 F irstChannelMeasured Result dB Reference dB SecondChannelMeasured SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP OUTPUT 722;"SENS:POW:REF TOREF,10DBM" SENSe:POWer:REFerence? SENSe 1 < > TOA TOREF < > TOREF Remote Operation - Commands 8-17...
  • Page 170 TOREF TOREF SENS:POW:REF SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"SENS1:POW:REF? TOA" ENTER 722;A$ SENSe:POWer:REFerence:DISPlay SENSe 1 Result dB Measured dBm Reference dBm TOREF SENSe:POWer:REFerence F irstChannelMeasured Result dB Reference dB SecondChannelMeasured SENSe:POWer:REFerence 8-18 Remote Operation - Commands...
  • Page 171 SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STAT:RATI SENS:POW:REF:STAT:RATI? OUTPUT 722;"SENS:POW:REF TOREF" OUTPUT 722;"SENS:POW:REF:DISP" SENSe:POWer:REFerence:STATe SENSe 1 < >< > SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE? SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"SENS1:POW:REF:STATE ON" SENSe:POWer:REFerence:STATe? SENSe 1 < > SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE:RATI SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP SENS:POW:UNIT SENS:POW:UNIT? OUTPUT 722;"SENS1:POW:REF:STAT?"...
  • Page 172 SENSe:POWer:REFerence:STATe:RATIo SENSe 1 < > TOA TOREF TOREF 2 TOB SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STAT:RATI? SENS:POW:REF:DISP OUTPUT 722;"SENS2:POW:REF:STAT:RATI TOB" SENSe:POWer:REFerence:STATe:RATIo? SENSe 1 SENS:POW:REF SENS:POW:REF? SENS:POW:REF:STATE SENS:POW:REF:STATE? SENS:POW:REF:STAT:RATI SENS:POW:REF:DISP OUTPUT 722;"SENS1:POW:REF:STAT:RATI?" ENTER 722;A$ 8-20 Remote Operation - Commands...
  • Page 173 SENSe:POWer:UNIT SENSe 1 < >< > Watt Watt SENS:POW:UNIT? SENS:POW:REF:STATE SENS:POW:REF:STATE? OUTPUT 722;"SENS1:POW:UNIT W" SENSe:POWer:UNIT? SENSe 1 < > SENS:POW:UNIT SENS:POW:REF:STATE SENS:POW:REF:STATE? OUTPUT 722;"SENS2:POW:UNIT?" ENTER 722;A$ SENSe:POWer:WAVElength < >< > < > SENSe 1 Remote Operation - Commands 8-21...

  • Page 174: Source Commands

    SENS:POW:WAVE? OUTPUT 722;"SENS2:POW:WAVE 1300NM" SENSe:POWer:WAVElength? SENSe 1 < > SENS:POW:WAVE OUTPUT 722;"SENS2:POW:WAVE?" ENTER 722;A$ SOURce Commands SOURce SOURce 1 :INTernal :FREQuency < > < > :FREQuency? :POWer :ATTenuation 1 < > < > :ATTenuation 1 :STATe < > :STATe? :WAVElength UPPer LOWer BOTH...
  • Page 175 Specifying the Channel SOURce SOURce1 SOURce2 SOURce:AM[:INTernal]:FREQuency SOURce 1 < >< > < > SOUR:AM[:INTernal]:FREQ? OUTPUT 722;"SOUR:AM[:INTernal]:FREQ 10KHZ" SOURce:AM[:INTernal]:FREQuency? SOURce 1 < > SOUR:AM[:INTernal]:FREQ OUTPUT 722;"SOURc2:AM[:INTernal]:FREQ?" ENTER 722;A$ Remote Operation - Commands 8-23...
  • Page 176 SOURce:POWer:ATTenuation SOURce 1 < >< > < > SOUR:POW:ATT2 SOUR:POW:ATT? OUTPUT 722;"SOUR:POW:ATT 1.0DB" SOURce:POWer:ATTenuation? SOURce 1 < > SOUR:POW:ATT OUTPUT 722;"SOURc2:POW:ATT1?" ENTER 722;A$ SOURce:POWer:STATe < >< > SOURce 1 SOUR:POW:STAT? 8-24 Remote Operation - Commands...
  • Page 177 OUTPUT 722;"SOUR:POW:STAT OFF" SOURce:POWer:STATe? SOURce 1 < > SOUR:POW:STAT OUTPUT 722;"SOURc2:POW:STAT?" ENTER 722;A$ SOURce:POWer:WAVElength Note SOURce 1 < > UPPer LOWer BOTH UPPer LOWer BOTH SOUR:POW:WAVE? OUTPUT 722;"SOUR:POW:WAVE UPP" Remote Operation - Commands 8-25...

  • Page 178: System Commands

    SOURce:POWer:WAVElength? SOURce 1 < > SOUR:POW:WAVE OUTPUT 722;"SOUR2:POW:WAVE?" ENTER 722;A$ SYSTem Commands SYSTem SYSTem < > , < > , < > :DATE :DATE? :ERRor? :TIME < > , < > , < > :TIME? 8-26 Remote Operation - Commands...
  • Page 179 SYSTem:DATE SYSTem:DATE < >< > , < > , < > *RST SYST:DATE? SYST:TIME SYST:TIME? OUTPUT 722;"SYST:DATE 1990,1,17" SYSTem:DATE? SYSTem:DATE? < > < > < > SYST:DATE SYST:TIME SYST:TIME? OUTPUT 722;"SYST:DATE?" ENTER 722;A$ SYSTem:ERRor? SYSTem:ERRor? < > < > Remote Operation - Commands 8-27...
  • Page 180 OUTPUT 722;"SYST:ERR?" ENTER 722; A$ SYSTem:TIME SYSTem:TIME < >< > , < > , < > SYST:TIME 23,59,60 *RST SYST:DATE SYST:DATE SYST:TIME? OUTPUT 722;"SYST:TIME 9,15,0" 8-28 Remote Operation - Commands...
  • Page 181 SYSTem:TIME? SYSTem:TIME? < > < > < > SYST:DATE SYST:DATE? SYST:TIME OUTPUT 722;"SYST:TIME?" ENTER 722;A$ Remote Operation - Commands 8-29...

  • Page 183: Program Commands

    HP-IB Application Commands Program Commands Remote Operation - Application Commands 9-1...
  • Page 184 PROGram PROGram 1 :[:SELected] :EXECute < > :NAME :NAME? :NUMBer < > < > :NUMBer? < > :STATe CONTinue PAUSe STOP :STATe? PROGram PROGram1 PROGram2 PROGram[:SELected]:EXECute PROGram 1 PROG:SEL:NAME OUTPUT 722;"PROG:SEL:EXEC" PROGram[:SELected]:NAME PROGram 1 < >< > PROGram *RST PROG PROG PROG:SEL:NAME? OUTPUT 722;"PROG:SEL:NAME LOGGING"...
  • Page 185 PROGram[:SELected]:NAME? PROGram 1 < > NO APPL PROG:SEL:NAME OUTPUT 722;"PROG:SEL:NAME?" ENTER 722;A$ PROGram[:SELected]:NUMBer PROGram 1 < >< > , < > PROG:SEL:NUMBer? PROG:SEL:NAME OUTPUT 722;"PROG:SEL:NUMBer SAMPLES,100" PROGram[:SELected]:NUMBer? PROGram 1 < >< > < > PROGram SELected EXECute PROG:SEL:NUMB PROG:SEL:NAME Remote Operation - Application Commands 9-3...
  • Page 186 OUTPUT 722;"PROG:SEL:NUMB? ASAMPLES" ENTER 722;A$ PROGram[:SELected]:STATe PROGram 1 CONTinue PAUSe STOP PROG:SEL:EXEC PAUSe STOP CONTinue PAUSe PROG:SEL:STATe? PROG:SEL:NAME OUTPUT 722;"PROG:SEL:STATe RUN" PROGram[:SELected]:STATe? PROGram 1 PROG:SEL:STAT PROG:SEL:NAME OUTPUT 722;"PROG:SEL:STAT?" ENTER 722;A$ 9-4 Remote Operation - Application Commands...

  • Page 187: The Logging Application

    Mainframe Applications The Logging Application LOGGING Note SAMPLES LOGGSTART Remote Operation - Application Commands 9-5...

  • Page 188: The Stability Application

    THRESHOLD LOGGSTART Note SENSe ASAMPLES RESULT The Stability Application STABILITY Note T_TOTAL T_TOTAL SENSe 9-6 Remote Operation - Application Commands...
  • Page 189 ASAMPLES RESULT Remote Operation - Application Commands 9-7...
  • Page 191 HP-IB Programming Examples Remote Operation - Programming Examples 10-1...
  • Page 192 Example 1 Function Listing Description Exit 10-2 Remote Operation - Programming Examples...
  • Page 193 Example 2 Function Listing Description sens1:pow Remote Operation - Programming Examples 10-3...
  • Page 194 read1:pow 10-4 Remote Operation - Programming Examples...
  • Page 195 Example 3 Function Listing Remote Operation - Programming Examples 10-5...
  • Page 196 Description fetch1:pow 10-6 Remote Operation - Programming Examples...
  • Page 197 Example 4 Function NNNNNNNNNNN Local Listing Remote Operation - Programming Examples 10-7...
  • Page 198 Description 10-8 Remote Operation - Programming Examples...
  • Page 199 Remote Operation - Programming Examples 10-9...
  • Page 200 Example 5 Function Listing 10-10 Remote Operation - Programming Examples...
  • Page 201 Remote Operation - Programming Examples 10-11...
  • Page 202 Description 10-12 Remote Operation - Programming Examples...
  • Page 203 Example 6 Function Listing Remote Operation - Programming Examples 10-13...
  • Page 204 Description 10-14 Remote Operation - Programming Examples...
  • Page 205 Example 7 Function Listing Remote Operation - Programming Examples 10-15...
  • Page 206 Description Exit 10-16 Remote Operation - Programming Examples...

  • Page 207: Installation

    Installation Safety Considerations Installation A-1...

  • Page 208: Initial Inspection

    Initial Inspection Warning Line Power Requirements Line Power Cable A-2 Installation...
  • Page 209 Warning Installation A-3...

  • Page 210: Operating Environment

    Operating Environment Warning A-4 Installation...
  • Page 211 Temperature Humidity Instrument Cooling Input/Output Signals Caution HP-IB Interface Installation A-5...
  • Page 212 Cables and Adapters Connector Caution A-6 Installation...
  • Page 213 Caution HP-IB Logic Levels Note Removing and Fitting Modules How to Remove a Module Caution Installation A-7...
  • Page 214 How to Fit a Module Caution A-8 Installation...

  • Page 215: Storage And Shipment

    Storage and Shipment Installation A-9...

  • Page 216: Claims And Repackaging

    Claims and Repackaging Return Shipments to HP A-10 Installation...
  • Page 217 Accessories Mainframe Accessories B-1...
  • Page 218 Modules B-2 Accessories...

  • Page 219: Connector Interfaces And Other Accessories

    Connector Interfaces and Other Accessories Caution Accessories B-3...
  • Page 220 B-4 Accessories...

  • Page 221: Speci Cations

    Speci cations Mainframe Speci cations Speci cations C-1...
  • Page 222 HP-IB interface Function code SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, CO, E2 SCPI command set HP-IB capability modes and parameters can be programmed Transfer time 20ms for one measurement result < 800ms for 100 measurement results out of memory...

  • Page 223: Declaration Of Conformity

    Declaration of Conformity Speci cations C-3...
  • Page 224 Supplementary Information: C-4 Speci cations...

  • Page 225: Acoustic Noise Emission

    Acoustic Noise Emission Speci cations C-5...

  • Page 227: Function Tests

    Function Tests Introduction Equipment Required Function Tests D-1...

  • Page 228: Test Failure

    Test Record Test Failure Instruments Speci cations D-2 Function Tests...
  • Page 229 IA. Function Test Using the HP 81533A Note Display Function and Module Interface Tests Display Function Tests Function Tests D-3...
  • Page 230 Note Module Interface Tests Note D-4 Function Tests...
  • Page 231 Function Tests D-5...
  • Page 232 ANALOG INPUT (8152A IN) P.CTRL IB. Function Test using a HP 81530/31/32 or HP 81536A Note D-6 Function Tests...
  • Page 233 SELFTEST SELFTEST Zeroing -- -- HP-IB Interface Test (Optional) *IDN? HEWLETT-PACKARD, 8153A, 0, n.n Function Tests D-7...
  • Page 234 D-8 Function Tests...
  • Page 235 Function Tests D-9...
  • Page 236 D-10 Function Tests...
  • Page 237 Function Tests D-11...

  • Page 239: Cleaning Procedures

    Cleaning Procedures whenever possible use physically contacting dry connectors Cleaning Materials Cleaning Procedures E-1...
  • Page 240 Cleaning Fiber/Front-Panel Connectors Cleaning Connector Interfaces Note E-2 Cleaning Procedures...
  • Page 241 Cleaning Connector Bushings Caution Cleaning Detector Windows Cleaning Lens Adapters Caution Cleaning Procedures E-3...
  • Page 242 Cleaning Detector Lens Interfaces Note E-4 Cleaning Procedures...
  • Page 243 Local Control Summary Chan Local Mode Measure Mode MEAS Param Disp dBm/W Zero N Dig Auto Down Local Control Summary F-1...
  • Page 244 Menu Mode MENU System Loss Record STABILTY T_TOTAL AUTODUMP LOGGING SAMPLES AUTODUMP START THRESHLD THRESHLD MAN LOGG Exec PLOT PRINT AUTOSCAL Y_MIN Y_MAX COMMENT More SHOW MAXIMUM MINIMUM DIFF AVERAGE F-2 Local Control Summary...
  • Page 245 ALIGNMNT TYPE DELTA MAXPOWER Edit Exec Pause Prev Next System Mode MENU SYS RECALL STORE HPIB ADDRESS MODE Local Control Summary F-3...
  • Page 246 LANGUAGE DISPLAY BRIGHT DATETIME MM/DD/YY HH:MM:SS F-4 Local Control Summary...
  • Page 247 HP 8153A HP-IB Command Summary Mnemonic Function Complete source handshake capability Complete acceptor handshake capability Basic talker; serial poll; unaddressed to talk if addressed to listen; no talk only Basic listener; unaddressed to listen if addressed to talk; no listen only...
  • Page 248 G-2 Remote Operation...
  • Page 249 *CLS *ESE *ESE? *ESR? *IDN? *OPC *OPC? *RST *SRE *SRE? *STB? *TRG *TST? *WAI ABORt ABORt 1 DISPlay DISPlay :BRIGhtness < > :BRIGhtness? :STATe < > :STATe ? FETCh FETCh 1 :SCALar :POWER :DC ? Remote Operation G-3...
  • Page 250 INITiate INITiate 1 :IMMediate :CONTinuous < > :CONTinuous? PROGram PROGram 1 :[:SELected] :EXECute :NAME < > :NAME? :NUMBer < > < > :NUMBer? < > :STATe CONTinue PAUSe STOP :STATe? The Logging Application application LOGGING Parameters SAMPLES LOGGSTART G-4 Remote Operation...
  • Page 251 THRESHOLD Results ASAMPLES RESULT The Stability Application application STABILITY Parameters T_TOTAL Results ASAMPLES RESULT READ READ 1 :SCALar :POWER :DC ? Remote Operation G-5...
  • Page 252 SENSe SENSe 1 :POWer :ATIME < > < > :ATIME? :RANGe :UPPER < > < > :UPPER ? < > :AUTO :AUTO? < > < > :WAVElength :WAVElength? :REFerence TOREF 2, < > < > :REFerence? TOREF :STATe < > :STATe? :RATIo TOREF...
  • Page 253 SOURce SOURce 1 :INTernal :FREQuency < > < > :FREQuency? :POWer < > < > :ATTenuation 1 :ATTenuation 1 :STATe < > :STATe? :WAVElength UPPer LOWer BOTH :WAVElength? Remote Operation G-7...
  • Page 254 STATus :CONDition? :ENABle :ENABle? < > :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :OPERation :SETTling :LPELTier :HPELTier :MEASuring :POWer :TRIGger :POWer :CORRecting :ZERO :AVERaging :POWer :PROGram : < > G-8 Remote Operation...
  • Page 255 STATus :CONDition? :ENABle :ENABle? < > :EVENt ? :NTRansition < > :NTRansition? :PTRansition < > STATus :QUEStionable :POWer :OVERRange :LCURRent :HCURRent :LMONitor :HMONitor :ENVTemp :ISUMmary :INSTrument 1 :POWer STATus:SOURce STATus :SOURce :CONDition? :ENABle < > :ENABle? :EVENt ? :NTRansition < >...
  • Page 256 SYSTem SYSTem :ERRor? :DATE < > , < > , < > :DATE? :TIME < > , < > , < > :TIME? G-10 Remote Operation...
  • Page 257 HP 8152A HP-IB Command Summary Di erences Note DB(MW) CAL? WCAL? FETCh FETCh WVL? ERR? LERR? Remote Operation H-1...
  • Page 258 Note Example CH1;Q1;CH2;U1 H-2 Remote Operation...
  • Page 259 Using the FETCh Command - An Example Old Program (HP 8152A) New Program (HP 8153A) ..1300 SUB Single_meas(P$) 1300 SUB Single_meas(P$) 1310 CLEAR Pmm 1310 CLEAR Pmm 1320 OUTPUT Pmm;"CSB"...

  • Page 260: Setting The Filter

    Setting the Filter *RST H-4 Remote Operation...
  • Page 261 Listener Function Settings Remote Operation H-5...
  • Page 262 1, < > 2, < > 1, < > 2, < > 1, < > 2, < > 1, < > DBM H-6 Remote Operation...
  • Page 263 2, < > DBM 3, < > < > Standard Parameter Set Remote Operation H-7...
  • Page 264 Talker Function Interrogating Settings LRN? ZER? F? 1 RNG? 1 RNG? WVL? 1 WVL? H-8 Remote Operation...
  • Page 265 REF? 1 REF? Remote Operation H-9...

  • Page 266: Status/Error Reporting

    Status/Error Reporting Parameter/Operation Mnemonic Comment Status Byte Returns 3-digit integer (000-191) Status Byte Mask Returns 3-digit integer (000-191) Condition Byte Returns 2-digit integer (00-63) Self-test Executes self-test, returns 0 for pass and 1 for fail Error Number Returns 3-digit integer representing error code Last Error Number Returns 3-digit integer for last active error...

  • Page 267: Error Codes

    Error Codes Local Operation Error Codes Module Related Errors LIGHT NO HEAD SETTLING NO HEAD MODULE MODULE MODULE MODULE KEY JAM Error Codes I-1...
  • Page 268 Speci c Error Identi ers Store and Recall Errors CH EMPTY MISMATCH NO DATA MEM FAIL Plot, Print, Show, and Manual Logging Errors NO DATA INVALID TLKONLY? Loss Errors CONFIG CONFIG I-2 Error Codes...
  • Page 269 HP-IB Errors HP-IB Error Codes No Error Instrument Speci c Errors Error Codes I-3...

  • Page 270: Command Errors

    Command Errors I-4 Error Codes...
  • Page 271 > Error Codes I-5...

  • Page 272: Execution Errors

    Execution Errors I-6 Error Codes...

  • Page 273: Device Dependant Errors

    Device Dependant Errors *RCL Error Codes I-7...

  • Page 274: Query Errors

    Query Errors I-8 Error Codes...
  • Page 275 Sales and Service Oces Sales and Service Oces J-1...
  • Page 276 J-2 Sales and Service Oces...
  • Page 277 Backdating Instruments with Serial Numbers 2946G00475 and Earlier Backdating K-1...
  • Page 278 Instruments with Serial Numbers 2946G00225 and Earlier The Print Application PRINT SAMPLE COMMENT Edit EDIT SAMPLES SAMPLES Edit COMMENT COMMENT Note COMMENT ! ? . , : ; & | @ K-2 Backdating...
  • Page 279 # $ % * [ ] Edit Next Prev Backdating K-3...
  • Page 281 Index Index-1...
  • Page 282 Index-2...
  • Page 283 Index-3...
  • Page 284 Index-4...
  • Page 285 Index-5...
  • Page 286 Index-6...
  • Page 287 Index-7...
  • Page 288 Index-8...

This manual is also suitable for:

81551mm81552sm81553sm81554sm

Table of Contents