Summary of Contents for CeoTronics CT-DECT Headset EX Base
Page 1
CT-DECT Headset / EX Base CT-DECT Headset / EX Standard Headset for wireless duplex communication Operating Instructions English dok1121-be-06-0617...
Contents Legend for figure1 – Headset (basic equipment) ..................5 CeoTronics Operating, Warning, and Safety Instructions ..............5 Additionally Safety Instructions ....................8 Description ............................9 General ............................ 9 Integration into a CT-DECT system ..................9 Power supply and operating time ..................... 9 Audio signals used ........................
Use CeoTronics products only without damage and abrasion. If repair work of any kind needs to be done to CeoTronics products, arrange for it to be performed only by the company CeoTronics or by a specialized workshop that is authorized by CeoTronics. In all other cases, our warranty and liability for the product shall lapse.
Page 6
Road traffic hazard! Do not leave CeoTronics products lying around loose in cars, e.g. on the parcel shelf. Stow these products in a suitable, safe place in the car so that they do not present a danger to you or to other occupants of the car, if emergency braking is effected.
Page 7
Damage to charger or rechargeable batteries! Charge rechargeable batteries only using the corresponding appropriate CeoTronics charger. Regard voltage and current data, also on the mains side (e.g. 230 V AC or 115 V AC).
The end user has to check and decide that the products can be used without risk. CeoTronics does not take over responsibility for any damage or material losses nor injuries to persons, caused by the use described above or by any other abnormal use of the products.
When part of a CT-DEC system one of the following Base stations, i.e. »CT-DECT Conference« or »CT-DECT Case« or »CT-DECT desk station« is used in lieu of the Base headset. Please attend to the special CeoTronics operating manuals for these Base stations. Power supply and operating time A rechargeable lithium polymer storage battery, fitted in the RH ear defender, supplies the headset with 3,7 V/ 1250 mAh power.
We hereby expressly point out that any repair, modification and/or replacement of components – including connectors and cables – may only be carried out by CeoTronics or specialist firms duly authorized by CeoTronics. Otherwise our guarantee and product liability are void and passed on to the party responsible.
(2) Operate CeoTronics equipment in accordance with the intended use in sound and clean condition. (3) Modifications on intrinsically safe CeoTronics equipment are strictly prohibited. (4) In case of any malfunction of intrinsically safe CeoTronics equipment, it must be removed from the Ex zone immediately.
Switch-on and automatic establishment of connection a. The headset is switched-off, if the ON/OFF switch and volume control (figure 4/a) is in the »OFF« position. Switch the headset on using the ON/OFF switch / volume control (rotary button). After switch-on a beep can be heard in the headsets. After another 5 to 10 seconds you hear a double beep, signaling that the headsets are synchronized.
“Special requirement” as per item (17) of the Ex Type Certificate: Do not recharge in potentially explosive areas! Use CeoTronics charger, part no. 0910135, only. Using other charging devices may destroy the storage battery or the electronics of the charger.
9.1.4 Starting the battery charger and charging Remark about charging: The charging unit is suitable for use in dry rooms at normal ambient temperature. The device may not be used in potentially explosive ( Ex) areas. While charging the unit may not be covered up.
Page 15
CAUTION! The locked plug-in connection may neither be twisted (figure 10) nor bent (figure 11). Improper handling could damage the plug-in connection. Figure 10 Figure 11 Never pull from the cable of the plug-inconnection. Pulling the cable may damage the plug-in connection (figure 12).
Inspect the ear defenders and particularly the headset cushions regularly for signs of cracks, fissures, and deterioration. Replace the headset if ear defenders are damaged and send it to CeoTronics for repair. Replace damaged or worn headset cushions as indicated in item 10.4, latest after 6 months of use.
Standard unit. For the subscription process, always the ON/OFF switch and the subscription switch of the CT- DECT devices are used. Always follow the appropriate CeoTronics instruction manual for the other CT-DECT device. 12.1 General TAKE NOTE: A subscription is a one-time procedure, normally performed in factory.
Page 18
TAKE NOTE: ● Two or more Standard headsets cannot be subscribed simultaneously to the Base headset, always only one at a time. In case two or more Standard headsets are used in conjunction with the Base headset, it is recommended to subscribe all Standard headsets one after the other to the Base headset, as it is possible to delete Standard headsets from the Base headset.
Page 24
Konformitätsinformation Hiermit erklärt die CeoTronics AG, dass sich die Geräte „CT-DECT Headset / EX Base“ „CT-DECT Headset / EX Standard“ in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 2014/53/EU (RED) befinden. Weitere Informationen zur Konformitätserklärung erhalten Sie auf Anfrage von unserem Fachpersonal bei der CeoTronics AG, Rödermark, Deutschland.
Need help?
Do you have a question about the CT-DECT Headset EX Base and is the answer not in the manual?
Questions and answers