Vitrifrigo OCX2 Instruction Manual

Hide thumbs Also See for OCX2:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17

Quick Links

ITA
MANUALE ISTRUZIONI
ICE MAKER
OCX2
GRAZIE PER AVER ACQUISTATO UN PRODOTTO VITRIFRIGO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OCX2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vitrifrigo OCX2

  • Page 1 MANUALE ISTRUZIONI ICE MAKER OCX2 GRAZIE PER AVER ACQUISTATO UN PRODOTTO VITRIFRIGO...
  • Page 3: Table Of Contents

    Sommario 1. INTRODUZIONE 2. AVVERTENZE GENERALI Destinazione del prodotto Ricevimento Installazione Manutenzione e sicurezza (tutti i modelli) Smaltimento 3. SCOPO DEL MANUALE Identi cazione del costruttore 4. DESCRIZIONE DELL’APPARECCHIO 5. INSTALLAZIONE Incasso dell’apparecchio, con condensatore ventilato (IM-CL e IM-XT) Incasso dell’apparecchio, con motore remoto ventilato Regolazione del pro lo per incasso Totale/Parziale Fissaggio dell’apparecchio 6.
  • Page 4: Introduzione

    1. INTRODUZIONE Gentile cliente, grazie per aver scelto un nostro prodotto. La Vitrifrigo si augura che Lei possa rimanere completamente soddisfatto dell’acquisto e ettuato. Il presente manuale è considerato parte integrante del frigorifero e deve seguire il percorso di vendita no all’utilizzatore.
  • Page 5: Destinazione Del Prodotto

    • È fatto assoluto divieto di utilizzare il frigorifero per usi diversi da quelli previsti. • Questo apparecchio non prevede il contatto diretto con gli alimenti • L’apparecchio può essere utilizzato da bambini di età non inferiore a 8 anni e da persone con ridotte capacità...
  • Page 6: Manutenzione E Sicurezza (Tutti I Modelli)

    • Non tentare di smontare, modi care o riparare il frigorifero. • Per eventuali problemi di funzionamento rivolgersi presso il centro assistenza Vitrifrigo più vicino; in ogni caso avvalersi di personale quali cato. • Non conservare sostanze esplosive in questo apparecchio, come bombolette per aerosol con propellente in ammabile.
  • Page 7: Scopo Del Manuale

    Vitrifrigo s.r.l. Via Mazzini 75 - fraz. Montecchio - 61022 VALLEFOGLIA(PU) – Italia tel. +39 0721 154500 - fax. +39 0721 497739 e-mail info@vitrifrigo.com - www.vitrifrigo.com 4. DESCRIZIONE DELL’APPARECCHIO • L’etichetta riportante matricola e dati tecnici è posizionata all’interno del produttore di ghiaccio.
  • Page 8 IM XR • A) Pannello di controllo F) Elettrovalvola B) Impianto refrigerante G) Scheda elettronica C) Condensatore H) Cubettiera D) Mascherina I) Rilevatore livello ghiaccio E) Sportello frontale J) Vaschetta raccogli ghiaccio IM XT • A) Mascherina G) Vaschetta raccogli ghiaccio B) Sportello frontale H) Connettore alimentazione C) Pannello di controllo...
  • Page 9: Installazione

    IM CL • A) Pannello di controllo I) Impianto refrigerante B) Sportello frontale J) Condensatore C) Griglia protezione motore K) Serbatoio (solo re ll) D) Sportellino frontale/Mascherina L) Pompa (solo re ll) E) Cubettiera M) Sensore livello (solo re ll) F) Rilevatore livello ghiaccio N) Tappo del serbatoio G) Vaschetta raccogli ghiaccio...
  • Page 10: Incasso Dell'apparecchio, Con Motore Remoto Ventilato

    Le aperture di ventilazione da prevedere per la versione IM-CL sono: • Nella parte inferiore posteriore in corrispondenza della griglia protezione motore, con dimensione non inferiore a 250mm (per l’altezza) e per la dimensione del frigorifero (per la larghezza); nella parte superiore posteriore/top non inferiore a 50mm (per l’altezza) e per la dimensione del frigorifero (per la larghezza).
  • Page 11: Fissaggio Dell'apparecchio

    Fissaggio dell’apparecchio. Per il ssaggio dell’apparecchio nello spazio d’incasso utilizzare unicamente i fori presenti nell’apposito pro lo di ssaggio (Allegato 3). 6. COLLEGAMENTO ELETTRICO ATTENZIONE l’operatore deve essere in grado di poter disconnettere l’apparecchio dalla rete elettrica. Assicurarsi quindi che nelle vicinanze dell’apparecchio ci sia un punto di accesso alla rete di alimentazione elettrica e/o che l’impianto sia provvisto di un interruttore magnetotermico di erenziale onnipolare da 6A tipo AC sensibilità...
  • Page 12: Avviamento Modello "Re Ll

    Avviamento modello “REFILL” Avviare la macchina tenendo premuto qualche secondo il pulsante di avvio A. Aprire lo sportellino ed estrarre in serbatoio, svitare il tappo presente sulla parte superiore del serbatoio e versare acqua potabile attraverso il bocchettone nel serbatoio (min.2 litri / max.7 litri).
  • Page 13: Modalità Freezer

    Al raggiungimento della temperatura pre ssata ha inizio il ciclo di espulsione del ghiaccio dalla cubettiera (il ciclo di produzione+espulsione può durare dai 25 ai 30 min.*). ESPULSIONE Una volta a temperatura il termostato attiva la resistenza e il motorino. Le lame estrattrici premeranno sul ghiaccio no a che non si sarà...
  • Page 14: Pulizia Del Fabbricatore

    Attendere che la brina presente all’interno della vasca sia completamente sciolta. Asciugare accuratamente le pareti interne del fabbricatore. Lasciare la porta semi aperta, utilizzando la vent-position presente sulla sta a , a nché possa realizzarsi un ricambio d’aria e non si crei umidità all’interno della vasca. Per le versioni REFILL svuotare e pulire il serbatoio.
  • Page 15 Problema Controllare che non manchi la corrente l’interruttore “STAND-BY” sia attivo ed il led acceso l’interruttore automatico dell’impianto elettrico non sia disinserito L’apparecchio non funziona la spina sia e ciente e correttamente inserita nella presa di corrente. la presa di corrente sia e ciente.
  • Page 16: Ice Maker

    INSTRUCTION MANUAL ICE MAKER OCX2 THANK YOU FOR PURCHASING A VITRIFRIGO PRODUCT...
  • Page 17 Index 1. INTRODUCTION 2. GENERAL WARNINGS Destination of the product Receipt Installation Maintenance and safety (all models) Disposal 3. PURPOSE OF THE MANUAL Identi cation of the manufacturer 4. DESCRIPTION OF THE APPLIANCE 5. INSTALLATION Recessed appliance, with ventilated condenser (IM-CL and IM-XT) Appliance recess, with ventilated remote motor Pro le adjustment for Total/Partial recess Fixing the appliance...
  • Page 18: General Warnings

    This manual is considered an integral part of the refrigerator and must follow the sales path to the user. The same can be consulted at the Vitrifrigo website www.vitrifrigo.com. Each refrigerator, before being shipped, is thoroughly checked and tested to ensure it operates correctly.
  • Page 19 • Follow the installation instructions given in this manual carefully. • It is absolutely forbidden to use the appliance for uses other than those intended. • The appliance may be used by children aged 8 and older and by people with reduced physical, sensory or mental abilities, and by people lacking experience or the necessary knowledge, provided that use is supervised or done a er suitable instruction has been given regarding the safe use of the appliance and once there is...
  • Page 20 • Do not attempt to disassemble, modify or repair the appliance. • For any operational problems contact the Vitrifrigo Service Centre closest to you; in any case, request the assistance of a suitably quali ed person. • Do not store explosive substances in this appliance such as aerosol cans with ammable propellant.
  • Page 21: Purpose Of The Manual

    Via Mazzini 75 - fraz. Montecchio - 61022 VALLEFOGLIA(PU) – Italia tel. +39 0721 154500 - fax. +39 0721 497739 e-mail info@vitrifrigo.com - www.vitrifrigo.com 4. DESCRIPTION OF THE APPLIANCE The label stating the serial number and technical data is positioned inside the ice maker in the upper right hand side.
  • Page 22 IM XR • A) Control panel F) Solenoid valve B) Refrigeration system G) Electronic board C) Condenser H) Ice cube tray D) Mask I) Ice level detector E) Front door J) Ice collector tray IM XT • A) Mask G) Ice collector tray B) Front door H) Power connector C) Control panel...
  • Page 23: Installation

    IM CL • A) Control panel I) Refrigeration system B) Front door J) Condenser C) Motor protection grille K) Tank (only re ll) D) Front ap/Mask L) Pump (only re ll) E) Ice cube tray M) Level sensor (only re ll) F) Ice level detector N) Tank cap G) Ice collector tray...
  • Page 24 The ventilation openings to be provided for the IM-CL version are: • In the lower rear part at the motor protection grille, with a size not less than 250mm (for the height) and for the size of the refrigerator (for the width); in the upper rear/top not less than 50mm (for the height) and for the size of the refrigerator (for the width), see g.1a.
  • Page 25: Fixing The Appliance

    Fixing the appliance To secure the appliance in the built-in space, use only the holes in the relevant fastening pro le (Annex 3). 6. ELECTRICAL CONNECTION ATTENTION The operator must be able to disconnect the appliance from the mains electricity. Therefore, make sure that there is an access point to the power supply network near the appliance and/or that the system is equipped with an omnipolar di erential magnetothermic switch, 6A type AC sensitivity 30 mA, with minimum 3mm contact...
  • Page 26: Using The Ice Maker

    “REFILL” Model start-up Start the machine by keeping the start button A pressed for a few seconds. Open the hatch and remove the tank, unscrew the cap on the top of the tank and pour drinking water through the ller into the tank (min.2 litres/max.7 litres). In order to completely disconnect the tank from the machine, disengage the water syphon tube by pressing the release ring on the coupling and simultaneously pulling the tube upwards.
  • Page 27 When the pre-set temperature is reached, the cycle of ejection of the ice from the ice cube tray begins (the production+ejection cycle can last from 25 to 30 min.*). EJECTION Once at temperature, the thermostat activates the resistance and the motor. The extracting blades will press on the ice until it detaches;...
  • Page 28: Cleaning The Ice Maker

    take place and so that no humidity is created inside the tray. For the REFILL versions, empty and clean the tank. 10. CLEANING THE ICE MAKER Before starting to clean the ice maker, make sure it is not connected to the mains electricity. If connected, unplug the appliance from the electrical supply.
  • Page 29 Problems Check that it is energised the “STAND-BY” switch A is active and the LED is on the automatic circuit breaker of the electrical system is not disconnected The appliance does not work the plug is e cient and correctly inserted into the socket and the power outlet works.
  • Page 30: Manuel D'instructions

    MANUEL D’INSTRUCTIONS ICE MAKER OCX2 MERCI D’AVOIR ACHETÉ UN PRODUIT VITRIFRIGO...
  • Page 31 Index 1. INTRODUCTION 2. AVERTISSEMENTS Destination du produit Réception Installation Maintenance et sécurité (tous les modèles) Élimination de l’appareil 3. BUT DU MANUEL Identi cation du constructeur 4. DESCRIPTION DE L’APPAREIL 5. INSTALLATION Encaissement de l’appareil, avec condenseur ventilé (IM-CL et IM-XT) Encastrement de l’appareil, avec moteur à...
  • Page 32 Ce manuel peut être consulté à l’intérieur du site web de Vitrifrigo www.vitrifrigo.com. Chaque réfrigérateur, avant d’être expédié, est soumis à des contrôles et à des tests pour s’assurer de son bon fonctionnement.
  • Page 33 • Suivez exclusivement les instructions d’installation de ce manuel. • Il est strictement interdit d’utiliser l’appareil pour des usages autres que ceux prévus. • Cet appareil ne prévoit pas de contact direct avec les aliments. • L’appareil peut être utilisé par des enfants d’au moins 8 ans et par des personnes ayant des capacités physiques, sensorielles ou mentales réduites, ou manquant d’expérience ou de connaissances nécessaires, à...
  • Page 34 • En cas d’anomalies de fonctionnement de l’appareil, contacter le centre d’assistance Vitrifrigo le plus proche ; dans tous les cas, faire appel à du personnel quali é. • Ne conservez pas de substances explosives dans cet appareil, telles que des bombes aérosols contenant des agents propulseurs in ammables.
  • Page 35: Description De L'appareil

    Via Mazzini 75 - fraz. Montecchio - 61022 VALLEFOGLIA(PU) – Italia tel. +39 0721 154500 - fax. +39 0721 497739 e-mail info@vitrifrigo.com - www.vitrifrigo.com 4. DESCRIPTION DE L’APPAREIL L’étiquette avec le numéro de série et les données techniques se trouve à l’intérieur de la machine à...
  • Page 36 IM XR • A) Panneau de commande F) Électrovanne B) Installation de réfrigération G) Carte électronique C) Condenseur H) Bac à glaçons D) Protection I) Capteur niveau de la glace E) Portillon frontal J) Cuve de récupération des glaçons IM XT •...
  • Page 37 IM CL • A) Panneau de commande I) Installation de réfrigération B) Portillon frontal J) Condenseur C) Grille de protection moteur K) Réservoir (seulement re ll) D) Rabat frontal/ Protection L) Pompe (seulement re ll) E) Bac à glaçons M) Capteur de niveau (seulement re ll) F) Capteur niveau de la glace N) Bouchon du réservoir G) Cuve de récupération des glaçons...
  • Page 38 Les ouvertures de ventilation à prévoir pour la version IM-CL sont situées : • Sur la partie inférieure arrière, au niveau de la grille de protection du moteur, de dimensions non inférieures à 250 mm (pour la hauteur) et proportionnées aux dimensions du réfrigérateur (pour la largeur) ;...
  • Page 39: Fixation De L'appareil

    Fixation de l’appareil Pour la xation de l’appareil dans l’espace d’encaissement, utiliser uniquement les trous présents sur le pro l de xation (Annexe 3). 6. BRANCHEMENT ÉLECTRIQUE ATTENTION L’opérateur doit pouvoir débrancher l’appareil du secteur. Véri er la présence près de l’appareil d’un point d’accès au secteur d’alimentation électrique et/ou que l’installation soit munie d’un interrupteur magnétothermique di érentiel omnipolaire de 6A du type CA sensibilité...
  • Page 40: Utilisation De La Machine À Glaçons

    Démarrage modèle “REFILL” Démarrer la machine en maintenant le bouton de démarrage A enfoncé pendant quelques secondes. Ouvrir le volet E et extraire le réservoir, dévisser le bouchon situé sur la partie supérieure du réservoir et verser de l’eau potable à travers la goulotte dans le réservoir (min.2 litres / max.7 litres).
  • Page 41 Lorsque la température programmée est atteinte, le cycle d’expulsion des glaçons du bac démarre (le cycle de production+expulsion peut durer de 25 à 30 min.*). EXPULSION Quand la température est atteinte, le thermostat active l’élément chau ant et le moteur. Les lames d’extraction resteront sur le glaçon jusqu’à...
  • Page 42 d’air puisse avoir lieu et qu’aucune humidité ne soit créée à l’intérieur de la cuve. Pour les versions REFILL, vider et nettoyer le réservoir. 10. NETTOYAGE DE LA MACHINE À GLAÇONS Avant le nettoyage, véri er que la machine ne soit pas connectée au système électrique. Dans le cas contraire, débrancher la che de la prise de courant.
  • Page 43 Problème Contrôler que Il n’y ait pas de panne de courant l’interrupteur « STAND-BY » A soit actif et que le voyant lumineux soit allumé le disjoncteur du système électrique ne soit pas coupé L’appareil ne fonctionne pas la che soit e cace et correctement branchée dans la prise de courant et que la prise de courant soit e cace.
  • Page 44: Ice Maker

    HANDBUCH ICE MAKER OCX2 WIR DANKEN IHNEN SICH FÜR EIN VITRIFRIGO PRODUKT ENTSCHIEDEN ZU HABEN...
  • Page 45 Inhaltsverzeichnis 1. EINFÜHRUNG 2. ALLGEMEINE HINWEISE Bestimmungszweck des Produkts Erhalt Installation Wartung und Sicherheit Entsorgung 3. ZIEL DES HANDBUCHES Angabe des Herstellers 4. BESCHREIBUNG DES GERÄTS 5. INSTALLATION Einbaugerät, mit belü etem Kondensator (IM-CL und IM-XT) Einbau des Gerätes mit belü etem Außenmotor Einstellen des eingebauten Pro ls Total/Teilweise Befestigung des Gerätes 6.
  • Page 46: Einführung

    1. EINLEITUNG Lieber Kunde, vielen Dank, dass Sie sich für ein Produkt von uns entschieden haben. Vitrifrigo ho , dass Sie mit Ihrem Kauf vollkommen zufrieden sind. Das vorliegende Handbuch ist integraler Bestandteil des Kühlschrankes und muss diesem vom Kauf bis zum Endnutzer begleiten.
  • Page 47: Erhalt

    werden. • Es ist absolut verboten, das Gerät für einen anderen als den vorgesehenen Zweck zu verwenden. • Das Gerät kann von Kinder mit einem Mindestalter von 8 Jahre und von Personen mit eingeschränkten körperlichen, sensoriellen oder mentalen Fähigkeiten sowie ohne Erfahrung und ohne das notwendige Wissen verwendet werden, sofern diese beim Gebrauch überwacht werden oder Anweisungen zum sicheren Gebrauch und Erläuterungen über die damit verbundenen Gefahren erhalten haben.
  • Page 48: Wartung Und Sicherheit

    • Eisbereiter der IM-Serie sollten bei eingebauter Installation verwendet werden. ACHTUNG Um Gefahren durch eine Instabilität des Gerätes zu vermeiden, muss es gemäß den Anweisungen xiert werden. Wartung und Sicherheit • Die Wartung des Geräts darf nur von quali ziertem Personal durchgeführt werden •...
  • Page 49: Ziel Des Handbuches

    Via Mazzini 75 - fraz. Montecchio - 61022 VALLEFOGLIA(PU) – Italia tel. +39 0721 154500 - fax. +39 0721 497739 e-mail info@vitrifrigo.com - www.vitrifrigo.com 4. BESCHREIBUNG DES GERÄTS Das Typenschild mit der Seriennummer und den technischen Daten be ndet sich im oberen rechten Teil im Eisbereitersinneren.
  • Page 50 IM XR • A) Bedienfeld F) Magnetventil B) Kühlmittelsystem G) Elektronische Karte C) Kondensator H) Eiswürfeleinheit D) Maske I) Eisniveau-Anzeige E) Haustür J) Eissammelwanne IM XT • A) Maske G) Eissammelwanne B) Haustür H) Stromversorgungsanschluss C) Bedienfeld I) Elektronische Karte D) Magnetventil J) Kühlmittelsystem E) Eiswürfeleinheit...
  • Page 51: Installation

    IM CL • A) Bedienfeld I) Kühlmittelsystem B) Haustür J) Kondensator C) Motorschutzgitter K) Behälter (nur re ll) D) Vorderklappe/Maske L) Pumpe (nur re ll) E) Eiswürfeleinheit M) Füllstandssensor (nur re ll) F) Eisniveau-Anzeige N) Tankdeckel G) Eissammelwanne O) Wasserschlauchkupplung H) Elektronische Karte 5.
  • Page 52: Einbau Des Gerätes Mit Belü Etem Außenmotor

    Die für die IM-CL-Version vorzusehenden Lü ungsö nungen sind: • Im unteren hinteren Teil am Motorschutzgitter, mit einer Größe von nicht weniger als 250mm (für die Höhe) und für die Größe des Kühlschranks (für die Breite); im oberen hinteren/oberen Teil nicht weniger als 50mm (für die Höhe) und für die Größe des Kühlschranks (für die Breite), siehe Abb.1a.
  • Page 53: Befestigung Des Gerätes

    Befestigung des Gerätes Zur Befestigung des Geräts im Einbauraum dürfen nur die Löcher im Befestigungspro l verwendet werden (Anhang 3). 6. ELEKTRISCHER ANSCHLUSS ACHTUNG Der Bediener muss das Gerät vom Stromnetz trennen können. Stellen Sie daher sicher, dass sich in der Nähe des Geräts ein Zugangspunkt zum Stromversorgungsnetz be ndet und/oder dass das System mit einem allpoligen magnetothermischen Di erentialschutzschalter 6A mit einer AC-Emp ndlichkeit von 30 mA und einer Mindestkontaktö...
  • Page 54: Starten Modell "Re Ll

    Starten modell “REFILL” Starten Sie die Maschine, indem Sie den Startknopf A einige Sekunden lang gedrückt halten. Ö nen Sie die Klappe und ziehen Sie den Behälter heraus, schrauben Sie den am oberen Teil des Behälters vorhandenen Deckel P ab und gießen Sie Trinkwasser durch den Stutzen in den Behälter (min.2 Liter / max.7 Liter).
  • Page 55: Gefriermodus

    Wenn die eingestellte Temperatur erreicht ist, beginnt der Zyklus des Eis-Ausschußes aus der Eiswürfeleinheit (der Zyklus Produktion+Ausschuß kann von 25 bis 30 min.* dauern). AUSSCHUß Sobald die Temperatur erreicht ist, aktiviert das Thermostat das Heizelement und den Motor. Die Abziehklingen drücken so lange auf das Eis, bis es sich löst;...
  • Page 56: Reinigung Des Eisbereiters

    keine Feuchtigkeit im Inneren der Wanne entsteht. Bei den Versionen REFILL den Tank entleeren und reinigen. 10. REINIGUNG DES EISBEREITERS Stellen Sie vor dem Reinigen sicher, dass der Eisbereiter nicht an die elektrische Stromversorgung angeschlossen ist. Andernfalls den Stecker aus der Steckdose herausziehen. AUSSENSEITE Die Außenseite des Eisbereiters mit lauwarmem Wasser reinigen, mit kaltem Wasser nachwischen und mit einem weichen Tuch trocknen.
  • Page 57 Problem Kontrollieren Sie, dass Es keinen Stromausfall gibt der “STAND-BY”-Schalter A aktiv ist und die LED leuchtet der Schutzschalter der elektrischen Anlage nicht ausgeschaltet ist Das gerät funktioniert nicht der Stecker e zient ist und ordnungsgemäß in die Steckdose eingesteckt ist. Die Steckdose e zient ist.
  • Page 58 MANUAL DE INSTRUCCIONES ICE MAKER OCX2 GRACIAS POR HABER COMPRADO UN PRODUCTO VITRIFRIGO...
  • Page 59 Índice 1. INTRODUCCIÓN 2. ADVERTENCIAS GENERALES Destino del producto Recepción Instalación Mantenimiento y seguridad Eliminación 3. FINALIDAD DEL MANUAL Identi cación del fabricante 4. DESCRIPCIÓN DEL APARATO 5. INSTALACIÓN Empotrado del aparato, con condensador ventilado (IM-CL e IM-XT) Empotrado del aparato, con motor remoto ventilado Regulación del per l para empotrado Total/Parcial Fijación del aparato 6.
  • Page 60: Introducción

    Este manual se considera parte integrante del frigorí co y debe seguir el recorrido de venta hasta el usuario. El mismo se puede consultar en el sitio web de Vitrifrigo www. vitrifrigo.com. Cada frigorí co, antes de su envío, se somete a controles y pruebas para asegurar su correcto funcionamiento.
  • Page 61: Recepción

    • El aparato puede ser utilizado por niños de al menos 8 años de edad y por personas con capacidades físicas, sensoriales o mentales reducidas, o que carezcan de experiencia o de los conocimientos necesarios, siempre que sean supervisados o después de haber recibido instrucciones para el uso seguro del aparato y para la comprensión de los peligros inherentes al mismo.
  • Page 62: Mantenimiento Y Seguridad

    No intentar desmontar, modi car o reparar el aparato. • Para eventuales problemas de funcionamiento, comunicarse con el centro de asistencia Vitrifrigo más cercano; en cualquier caso, utilizar personal cuali cado. • No conservar sustancias explosivas en este aparato, como latas de aerosol con propulsor in amable.
  • Page 63: Finalidad Del Manual

    Via Mazzini 75 - fraz. Montecchio - 61022 VALLEFOGLIA(PU) – Italia tel. +39 0721 154500 - fax. +39 0721 497739 e-mail info@vitrifrigo.com - www.vitrifrigo.com 4. DESCRIPCIÓN DEL APARATO La etiqueta con la matrícula y los datos técnicos está colocada en el interior del fabricador en la parte superior del lado derecho.
  • Page 64 IM XR • A) Panel de control F) Electroválvula B) Instalación refrigerante G) Tarjeta electrónica C) Condensador H) Cubitera D) Mascarilla I) Detector de nivel de hielo E) Puerta frontal J) Cubeta recoge hielo IM XT • A) Mascarilla G) Cubeta recoge hielo B) Puerta frontal H) Conector alimentación C) Panel de control...
  • Page 65: Instalación

    IM CL • A) Panel de control I) Instalación refrigerante B) Panel de control J) Condensador C) Rejilla protección motor K) Depósito (solo re ll) D) Puertita frontal/Mascarilla L) Bomba (solo re ll) E) Cubitera M) Sensore de nivel (solo re ll) F) Detector de nivel de hielo N) Tapón del depósito G) Cubeta recoge hielo...
  • Page 66: Empotrado Del Aparato, Con Motor Remoto Ventilado

    Las aperturas de ventilación a prever para la versión IM-CL son: • En la parte inferior posterior a nivel de la rejilla de protección del motor, con dimensión no inferior a 250mm (para la altura) y para la dimensión del frigorí co (para el ancho);...
  • Page 67: Fijación Del Aparato

    Fijación del aparato Para la jación del aparato en el espacio de empotrado utilizar únicamente los agujeros presentes en el respectivo per l de jación (Anexo 3) 6. CONEXIÓN ELÉCTRICA ATENCIÓN El operador debe ser capaz de poder desconectar el aparato de la red eléctrica.
  • Page 68: Puesta En Marcha Modelo "Re Ll

    Puesta en marcha modelo “REFILL” Poner en marcha la máquina manteniendo presionado algunos segundos el botón de encendido A. Abrir la puertita y extraer el depósito, desenroscar el tapón presente en la parte superior del depósito y verter agua potable a través de la boca de llenado en el depósito (mín.2 litros / máx.7 litros).
  • Page 69: Modalidad Congelador

    Al alcanzar la temperatura pre jada tiene inicio el ciclo de expulsión del hielo de la cubitera (el ciclo de producción+expulsión puede durar de los 25 a los 30 min.*). EXPULSIÓN Una vez en temperatura el termostato activa la resistencia y el motorcito.
  • Page 70: Limpieza Del Fabricador

    vent-position presente en la abrazadera, para que pueda realizarse un intercambio de aire y no se cree humedad dentro de la cubeta. Para las versiones REFILL vaciar y limpiar el depósito. 10. LIMPIEZA DEL FABRICADOR Antes de proceder a la limpieza asegurarse de que el fabricador no esté conectado a la instalación eléctrica.
  • Page 71 Problema Controlar que no falte corriente el interruptor “STAND-BY” A esté activo y el led encendido el interruptor automático de la instalación eléctrica no esté desactivado El aparato no funciona el enchufe sea e ciente y esté correctamente conectado en la toma de corriente.
  • Page 72: Allegati

    ALLEGATI - ANNEXES Allegato MISURE DEL MODELLO E DI INCASSO Annex MODELS AND RECESS MEASUREMENTS MODEL ICE MAKER (mm) (mm) (mm) IM-CL IM-XT IM-XR** RECESS MODEL (mm) (mm) (mm) ICE MAKER IM-CL IM-XT IM-XR** **Dimensioni del motore remoto: (mm) 170 (A)x192(B)x366(C) Allegato INSTALLAZIONI Annex...
  • Page 73 CONDENSATORE VENTILATO VENTILATED CONDENSER INSTALLAZIONE APPARECCHIO ICE MAKER XT APPLIANCE INSTALLATION ICE MAKER XT MOTORE REMOTO VENTILATO VENTILATED REMOTE MOTOR INSTALLAZIONE APPARECCHIO ICE MAKER XR APPLIANCE INSTALLATION ICE MAKER XR ALLEGATI ANNEXES...
  • Page 74 Allegato FISSAGGI DISPOSITIVO Annex INSTALLATIONS FIG.1 FISSAGGIO MEDIANTE PROFILO FIXING WITH FITTING FRAME NOTE NOTES ALLEGATI ANNEXES...
  • Page 75 ALLEGATI ANNEXES...
  • Page 76: Dichiarazione Di Conformità Ue

    - è conforme alla Direttiva Bassa Tensione (LVD) 2014/35 CE - è conforme alla Direttiva Compatibilità Elettromagnetica (EMC) 2014/30 CE UE DECLARATION OF CONFORMITY Vitrifrigo srl, with Registered O ce in via Mazzini 75, 61022 locality Montecchio, VALLEFOGLIA, Italy declares under its own responsibility that the product:...
  • Page 77 IDENTIFICAZIONE PRODOTTO / PRODUCT IDENTIFICATION ICE MAKER OCX2 ALLEGATI ANNEXES...
  • Page 78 VITRIFRIGO S.r.l. Via Mazzini, 75 Fraz. Montecchio 61022 Vallefoglia (PU) tel. +39 0721.154.500 fax +39 0721.497.739 www.vitrifrigo.com REV 01 - 2023 Made in Italy...

Table of Contents