Subscribe to Our Youtube Channel
Related Manuals for Monoprice 15495
Summary of Contents for Monoprice 15495
- Page 1 Monoprice™ Stealth Motorized Recessed Projector Lift (Max 44 lbs.) 15495 User Manual...
-
Page 2: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this manual thoroughly, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. Installation and Operation This product should only be installed by a qualified structural contractor. Failure to follow proper •... -
Page 3: Power
Do not place or install this device in an area where it can be exposed to excessive amounts of • dust, humidity, oil, smoke, or combustible vapors. When it is extended, take care not to shake the lift or attempt to manually lift it up. •... -
Page 4: Remote Control (P/N): Gf123-5
When setting the lower height limit, ensure that there are at least one and a half loops on the • woven belt. Remote Control (P/N): GF123-5 Remove and immediately recycle or dispose of used batteries according to local regulations and •... -
Page 5: Table Of Contents
Notice for ISED Canada ........................................... 11 PACKAGE CONTENTS Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice™ Customer Service for a replacement. 1x Motorized Projector Lift Assembly •... -
Page 6: Product Overview
PRODUCT OVERVIEW... -
Page 7: Installation
INSTALLATION This projector lift is designed to be installed in the space between a dropped ceiling and the primary ceiling structure. The lift itself needs to be mounted to the primary structure, which must be capable of supporting four times the total weight of the lift and the projector. This lift weighs 48.1 lbs. (21.8 kg) and the maximum weight of any installed projector is 44.0 lbs. - Page 8 8. Connect the projector power and video to the projector. If using an inverted orientation, first feed the cables through the hole in the projector mounting plate. 9. Use a carpenter's level to recheck the balance of the projector mounting plate. If it is not perfectly level, adjust the length of the woven belts.
-
Page 9: Specifications
TECHNICAL SUPPORT Monoprice™ is pleased to provide free, live, online technical support to assist you with any questions you may have about installation, setup, troubleshooting, or product recommendations. If you ever need assistance with your new product, please come online to talk to one of our friendly and knowledgeable... -
Page 10: Regulatory Compliance
Check the website for support times and links. To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and type 15495 into the search bar. If available, support files are linked at the bottom of the product page. -
Page 11: Radio Notice For Fcc
This FCC Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Monoprice, including the use of non-approved antennas, could void the user’s authority to operate this device. - Page 12 Product pictures are for reference only. Brea, CA 92821 – USA Specifications described herein are subject to change without prior notification. www.monoprice.com Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc. Copyright © 2024 Monoprice, Inc. All rights reserved.
Need help?
Do you have a question about the 15495 and is the answer not in the manual?
Questions and answers