Battery Backup Installation; Maintenance - Timex T610S - CD Clock Radio User Manual

1. Remove unit and all packing materials from the carton. You should save packing materials in case unit needs
to be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources
of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields.
3. After installing the backup (see below) and reading the Maintenance notes, plug the AC cord into an outlet.
It is strongly recommended that a 9-Volt battery be installed into the unit, as directed below, in order to activate
this product's Battery Backup feature. In the event that the AC power cord is disconnected or a power failure
or other interruption occurs, the Battery Backup will maintain clock and alarm settings for the life of the battery,
ensuring that the alarm will sound when power is restored. During any interruptions to the power supply the
time and alarm settings will be saved and automatically restored when AC power is again active.
1. Gently turn the unit over and remove the battery compartment door.
2. Install one 9-Volt battery (alkaline batteries are recommended for longer
life), matching the terminal ends with the same-sized connectors of the
terminal harness.
3. Slide the battery compartment door back on, making sure the door locks
into place, and gently return the unit to its upright position.
1. Place the unit on a level surface away from direct sunlight or sources of excessive heat.
2. Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other
protective material should be placed between the unit and the furniture.
3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such
as thinner or similar materials, are not recommended as they may damage the surface of the case.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent
possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment
thoroughly and replace the battery.
6
Battery Compartment