Using The Repeat Function; Using The Random Function; Programming And Playing Cd Tracks; High-Speed Music Search - Timex T610S - CD Clock Radio User Manual

1. Press the
blink, indicating that this function has been activated.
2. Press the
indicating that this function has been activated. When the CD is finished, it will start over from the beginning.
3. Press the
1. Press the
tracks in a random order. The
1. When the CD Player is on (but not while a CD is playing), press the
on the display, and the
2. Press the
track to program and press the
3. Repeat Step 2 to continue storing tracks in the memory. You may program up to 20 tracks in any order.
After you have stored the maximum 20 tracks, the display will flash with the first programmed track.
4. To review the tracks you have already programmed, press the
the tracks you have programmed, in the order you have programmed them.
5. To play your program, press the
If the display has reverted to the clock setting, press the
skip to tracks in the programmed order. To stop playing your program, press the
Opening the CD Player door will reset the program settings.
Press and hold the
musical passages within a track. When you find the passage you are searching for, release the button. The
high-speed search can only be performed while the track is playing.
once to repeat the track that is currently playing. The
again to repeat the entire CD. The
again to cancel the repeat mode. The
once followed by the
will light, indicating that this function has been activated.
will flash. You have ten seconds to begin programming tracks.
or the
. Press the
or the
10
to set CD tracks. Find the first
. The first track is stored. The display will read "P02."
while the
or the
will
will stay lit,
will shut off.
to have the CD play
"P01" will appear
. The display will show
is flashing.
and then press the
to
.
to search for specific