GPI 01A Series Quick Start Manual

Visit GPIpumps.com
01A Series Specifications
Accurate, Convenient, Reliable,
and Economical
• For petroleum fuels only. Factory calibrated for
Model
diesel fuel, gasoline, or kerosene. Not for use with
water or chemicals.
Unit of Measurement
• 1-inch inlet and outlet. Kit includes (2) 3/4-inch
Flow Rate
reducer fittings and a 3/4 x 1-1/2-inch pipe fitting
for use on 3/4-inch nozzle installations. For 1-inch
Working Pressure
nozzle installations, a 1-inch close nipple is
required (not included).
Operating Temperature
• For use with flow ranges of 3 to 30 GPM or 11 to
Storage Temperature
113 L/min with pump or gravity flow systems.
Threads
• Large, easy to read LCD display with batch total
and cumulative total.
• Manual and automatic ON. Automatic OFF.
Limited Warranty Policy
Great Plains Industries, Inc. (GPI) hereby provides a limited
warranty against defects in material and workmanship on
all products manufactured by GPI. The warranty period shall
begin on the date of purchase confirmed with the original
purchase receipt or, if not available, the date of manufac-
ture. Manufacturer's sole obligation under the following
warranties will be limited to either, at Manufacturer's option,
replacing or repairing defective goods. If the product is no
longer available, replacement may be made with a similar
product of equal or greater value. Buyer's exclusive remedy
for breach of any such warranties will be enforcement of
such obligations of Manufacturer. The warranty shall extend
to the purchaser of this product and to any person to whom
such product is transferred during the warranty period.
Warranty shall not apply if:
The product has been subjected to neglect, misuse, abuse
or damage or has been installed or operated other than in
accordance with the manufacturer's operating instructions
or the product has been altered or modified outside the
warrantor's duly appointed representative.
Product components considered wear items are not included within the scope of this warranty.
01A Series Specifications
Model
Unit of Measurement
Flow Rate
Working Pressure
Operating Temperature
Storage Temperature
Threads
01A Series
Digital In-Line Fuel Meter
Compteur de carburant numérique en ligne
Medidor de combustible digital en línea
See inside for
Owner's Manual.
U.S.
01A31GM
Gallon
3 to 30 GPM
300 PSI
+14°F to +130°F
-40°F to +158°F
1-inch NPT, ¾-inch
fittings included
U.S.
01A31GM
Gallon
3 to 30 GPM
300 PSI
+14°F to +130°F
-40°F to +158°F
1-inch NPT, ¾-inch
fittings included
Protective bumper
cushions the meter
from impact
AAA alkaline batteries included.
Canada
01A31LM
Litre
11 to 113 L/min
20.7 bar
-10°C to +54°C
-40°C to +70°C
1-inch NPT, ¾-inch
Great Plains Industries, Inc.
fittings included
GreatPlainsIndustries.com
800-835-0113
©2021 Great Plains Industries, Inc. All Rights Reserved.
Charges for shipping and insuring packages to GPI are the
customer's responsibility. GPI will ship the warranted product back
to the customer via ground shipping free of charge for shipments
within the United States. International shipping charges and
customs fees to and from GPI are the customer's responsibility.
GREAT PLAINS INDUSTRIES, INC., EXCLUDES LIABILITY UNDER
THIS WARRANTY FOR DIRECT, INDIRECT, INCIDENTAL AND
CONSEQUENTIAL DAMAGES INCURRED IN THE USE OR LOSS
OF USE OF THE PRODUCT WARRANTED HEREUNDER.
THE COMPANY HEREWITH EXPRESSLY DISCLAIMS ANY WAR-
RANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTIC-
ULAR PURPOSE OTHER THAN FOR WHICH IT WAS DESIGNED.
THIS WARRANTY GIVES YOU SPECIFIC RIGHTS AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM U.S. STATE TO
U.S. STATE.
In compliance with MAGNUSON MOSS CONSUMER WARRANTY
ACT – PART 702 (governs the resale availability of the warranty terms)
To obtain warranty service contact the
GPI Product Support Department:
316-686-7361 or 800-835-0113
GPI will guide you through a product troubleshooting process
to determine the appropriate corrective actions.
Canada
01A31LM
Litre
11 to 113 L/min
20.7 bar
-10°C to +54°C
-40°C to +70°C
1-inch NPT, ¾-inch
fittings included
Flow Range
3 - 30
GPM
plage de débit
rango de flujo
11-113
L/min
International
01A52LM
Litre
11 to 113 L/min
20.7 bar
-10°C to +54°C
-40°C to +70°C
1-inch ISO RC (BSPT),
no fittings included
International
01A52LM
Litre
11 to 113 L/min
20.7 bar
-10°C to +54°C
-40°C to +70°C
1-inch ISO RC (BSPT),
no fittings included