Bosch Truvo Instructions Manual
Bosch Truvo Instructions Manual

Bosch Truvo Instructions Manual

Digital detector
Hide thumbs Also See for Truvo:

Advertisement

Quick Links

16 | English
2006/66/EG müssen defekte oder verbrauchte Akkus/Batterien getrennt
gesammelt und einer umweltgerechten Wiederverwendung zugeführt wer-
den.
English
Safety Instructions
All instructions must be read and observed. The safe-
guards integrated into the measuring tool may be com-
promised if the measuring tool is not used in accord-
ance with these instructions. STORE THESE INSTRUC-
TIONS IN A SAFE PLACE.
Have the measuring tool serviced only by a qualified specialist using
u
only original replacement parts. This will ensure that the safety of the
measuring tool is maintained.
Do not use the measuring tool in explosive atmospheres which con-
u
tain flammable liquids, gases or dust. Sparks may be produced inside
the measuring tool, which can ignite dust or fumes.
The measuring tool may not be 100 % accurate for technological
u
reasons. To eliminate hazards, familiarise yourself with further
sources of information, such as building plans and photographs
taken during construction, etc. before carrying out any drilling, saw-
ing or routing work on walls, ceilings or floors. The accuracy of the
measuring tool may be affected by environmental influences, such the
level of humidity or there being other electronic devices nearby. The
structure and condition of the walls (e.g. damp, building materials con-
taining metal, electrically conductive wallpaper, insulating materials,
tiles) and the number, type, size and position of the objects may distort
the measuring results.
Make sure that you are properly earthed when taking measurements.
u
If you are not properly earthed (e.g. by wearing insulating footwear or by
standing on a ladder), it will not be possible to locate live cables.
1 609 92A 6H5 | (30.06.2021)
Bosch Power Tools

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Truvo and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bosch Truvo

  • Page 1 Make sure that you are properly earthed when taking measurements. If you are not properly earthed (e.g. by wearing insulating footwear or by standing on a ladder), it will not be possible to locate live cables. 1 609 92A 6H5 | (30.06.2021) Bosch Power Tools...
  • Page 2: Product Description And Specifications

    (2) On/off switch (3) Indicator light (4) Left-hand and right-hand marking aids (5) Top marking aid (6) Sensor area (7) Serial number (8) Battery compartment cover (9) Battery compartment cover locking mechanism Bosch Power Tools 1 609 92A 6H5 | (30.06.2021)
  • Page 3: Technical Data

    The serial number (7) on the type plate is used to clearly identify your measuring tool. The accuracy and detection depth of the measuring result may be negatively affected if the condition of the substrate is unfavorable. 1 609 92A 6H5 | (30.06.2021) Bosch Power Tools...
  • Page 4: Inserting/Changing The Batteries

    Avoid hard knocks to the measuring tool or dropping it. After severe external influences and in the event of abnormalities in the functionality, you should have the measuring tool checked by an authorised Bosch after-sales service agent. Certain ambient conditions fundamentally impair the measuring res- ults.
  • Page 5: Starting Operation

    Note: When the measuring tool has switched off automatically, the on/off switch (2) will still be in the "on" position. To switch the measuring tool on again, first switch it off and then switch it on again. 1 609 92A 6H5 | (30.06.2021) Bosch Power Tools...
  • Page 6: How It Works

    Before drilling, sawing or routing into walls, refer to other sources of information to ensure that you eliminate hazards. Since the measuring Bosch Power Tools 1 609 92A 6H5 | (30.06.2021)
  • Page 7 – The 50–60 Hz signal from the electricity cable must be stronger along the cable than in its immediate vicinity. If the wall is very dry or 1 609 92A 6H5 | (30.06.2021) Bosch Power Tools...
  • Page 8: Working Advice

    6 s. During calibration, the indicator light (3) flashes green at a fast rate. Once the indicator light lights up green continuously, the calibration is complete and the measuring tool is ready to use. Bosch Power Tools 1 609 92A 6H5 | (30.06.2021)
  • Page 9 Indicator light flashes continuously, alternating green/yellow/red. Measuring tool faulty Send the measuring tool to an authorised Bosch after-sales service centre. Error when searching for and indicating metal Cause Corrective measures Indicator light lights up yellow or red even though there is no metal nearby.
  • Page 10 Live cable not found. No/unusual voltage in the Apply voltage to the cable, e.g. by turning on the cable corresponding light switches. It is not possible to reliably detect multi-phase electricity cables Bosch Power Tools 1 609 92A 6H5 | (30.06.2021)
  • Page 11: Maintenance And Service

    You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any ques- tions about our products and their accessories.
  • Page 12 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: (0344) 7360109 E-Mail: boschservicecentre@bosch.com You can find further service addresses at: www.bosch-pt.com/serviceaddresses...

Table of Contents