Pioneer ELITE PRO-730HD Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Monitor
  5. PRO-730HD
  6. Operating instructions manual
Pioneer ELITE PRO-730HD Operating Instructions Manual

Pioneer ELITE PRO-730HD Operating Instructions Manual

Hdtv projection monitor
Hide thumbs Also See for ELITE PRO-730HD:
Table of Contents

Advertisement

Quick Links

Download this manual
HDTV PROJECTION MONITOR
PRO-730HD
PRO-630HD
PRO-530HD
Operating Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELITE PRO-730HD and is the answer not in the manual?

Questions and answers

Related Manuals for Pioneer ELITE PRO-730HD

Summary of Contents for Pioneer ELITE PRO-730HD

  • Page 1 HDTV PROJECTION MONITOR PRO-730HD PRO-630HD PRO-530HD Operating Instructions...
  • Page 2 The rating systems are when you are concerned with viewing two programs. defined below: Pioneer PureCinema III Format Converter <U.S.A. RATING SYSTEM> The TV parental Guidelines are used to rate television programming: An advanced and exclusive I/P (Interlace/Progressive) third generation <TV-Y>, <TV-Y7>, <TV-G>, <TV-PG>, <TV-14>...

  • Page 3: Important Notice

    Thank you for purchasing this PIONEER HDTV Projection Monitor. Please read the precautionary instructions enclosed with these operating instructions please do so before proceeding. After learning how to operate the Projection Monitor, be sure to keep this manual handy for future reference.

  • Page 4: Important Safety Instructions And Warnings

    The following symbols are found in this WARNING manual and on the labels on the product. This symbol refers to a hazard or unsafe They alert the operators and service practice which can result in severe personal personnel of this equipment to potentially injury or death.
  • Page 5 Do not subject your Monitor to 11-1. Do not place this Monitor on an impact of any kind. Be particularly unstable, uneven or an inclined careful not to damage the screen location. The Monitor may surface. overturn, causing serious injury (to a person), and serious damage Unplug the Monitor from the wall to the appliance.
  • Page 6 An outdoor antenna system For added protection during a should not be located in the lightning storm, or when it is left vicinity of overhead power lines/ unattended and unused for long electric lights or power circuits, or periods of time, unplug the where it can fall onto such power Monitor from the wall outlet and lines or circuits.

  • Page 7: Table Of Contents

    CONTENTS INTRODUCTION HOW TO USE THESE OPERATING INSTRUCTIONS ..... 8 INSTALLING THE MONITOR ............9 HOW TO ATTACH THE PROVIDED FRAME COVER ....10 HOW TO REMOVE THE PROTECTIVE SCREEN ......11 BASIC OPERATIONS BEFORE USE ................12 CONNECTING THE ANTENNA ........... 14 CONNECTING VIDEO/AUDIO EQUIPMENT ........

  • Page 8: How To Use These Operating Instructions

    HOW TO USE THESE OPERATING INSTRUCTIONS The following page is an example of the way that basic operating instructions are shown in this manual. The explanation method varies from page to page. * The screen illustrations may be different from the actual screen display. AUTO CHANNEL PRESET Explanation of the function on this...

  • Page 9: Installing The Monitor

    • Handle the screen with care to avoid scratches or damages. • While the Projection Monitor is operating, it is cooled by • Ask your dealer or a Pioneer authorized service center to airflow through ventilation holes in the rear and bottom.

  • Page 10: How To Attach The Provided Frame Cover

    HOW TO ATTACH THE PROVIDED FRAME COVER ATTACH THE FRAME COVER BEFORE USING THE MONITOR. 2. Attaching the upper and lower frame covers Push in the upper and lower frame covers from the outside along the groove on the panel frame until you hear a click. PARTS INCLUDED FOR FRAME COVER INSTALLATION: SIDE FRAME COVERS (L, R) (TRIMS) (short) FRAME COVERS...

  • Page 11: How To Remove The Protective Screen

    HOW TO REMOVE THE PROTECTIVE SCREEN The protective screen is attached when the monitor is shipped to protect the display. We do not recommend that you remove it, but if you have to remove it, do so following the procedure shown below. 4.

  • Page 12: Before Use

    BEFORE USE Before you watch the TV, perform the following procedure. Connect the cables of the VHF antenna and UHF antenna to the ANTENNA A terminal. (See pages 14 and 15) Mixer Connect the CATV converter to the ANTENNA B terminal. (See pages 14 and 15) ANTENNA /CABLE...

  • Page 13: Inserting Batteries Into The Remote Control Unit

    BEFORE USE Inserting batteries into the remote control unit CAUTION Incorrect use of batteries may lead to leakage or rupture. Always be sure to follow these instructions. A. Never mix new and used batteries. B. Batteries of the same size may have different voltages depending on their type.

  • Page 14: Connecting The Antenna

    CONNECTING THE ANTENNA • A good color picture depends on a good TV signal. So does Connect the TV signal source to your Monitor properly. good multichannel (stereo program and SAP) sound. Ask Use a 75-ohm coaxial cable with an F-type connector and your dealer for advice on how to install your external antenna connect the cable as shown in the illustration.
  • Page 15 CONNECTING THE ANTENNA Connecting the CATV converter with VCR Cable TV Splitter CATV converter ANTENNA /CABLE ANTENNA Connecting VHF/UHF antenna and CATV converter VHF antenna UHF antenna U/V mixer ANTENNA /CABLE Cable TV CATV converter...

  • Page 16: Connecting Video/Audio Equipment

    CONNECTING VIDEO/AUDIO EQUIPMENT DVD/LD player ◊B√¿≥??ÙÛ ◊B√¿≥??ÙÛ Video movie, etc. SAT tuner Digital tuner • Refer to the instructions of your VCR or DVD/LD player for • Only the INPUT 1 and INPUT 2 jacks can input the component the detailed connections. video signal.
  • Page 17 CONNECTING VIDEO/AUDIO EQUIPMENT DVD/LD player SIGNAL Component video output SIGNAL of a DVD player can be connected to both BNC or Rear panel RCA types. The video output can be connected to BNC or to RCA types. INPUT INPUT INPUT 1 PROFESSIONAL VIDEO COMPONENT VIDEO INPUT 3...

  • Page 18: Input Jacks

    CONNECTING VIDEO/AUDIO EQUIPMENT RGB INPUT jack Inputs five signals – R, G, B, H and V – output from digital tuners and the like. Front panel Input format in which images can be received. S-VIDEO VIDEO L-AUDIO-R Horizontal Vertical (MONO) VIDEO S-VIDEO Format...
  • Page 19 CONNECTING VIDEO/AUDIO EQUIPMENT MONITOR/TV OUTPUT jacks INPUTS INPUT 5 These are used for connecting the monitor to a VCR for recording, or for linking it to another monitor. These jacks output DIGITAL the video and audio signals of the source currently selected by the INPUT SELECT.

  • Page 20: Front Panel Functions

    FRONT PANEL FUNCTIONS A flip-down door conceals the INPUT 4 jacks. Push gently and 3 MAIN POWER (OFF/ON) button release, to open the door. To close the door, lift it back up into If the button is OFF, the power of the monitor is shut off and 4 place.
  • Page 21 SPEAKER: NORMAL treatment, immediately unplug the power cord and call your AUDIO OUT: FIXED nearest PIONEER-authorized service center. SYSTEM MODE: NOTES: • When this button is pressed while adjusting the MULTI- • On rare occasions, an electrical discharge may occur inside the POINT convergence, the MULTI-POINT convergence CRT*.

  • Page 22: Remote Control Unit Functions

    REMOTE CONTROL UNIT FUNCTIONS Set the mode switch to TV. TV Power button (STANDBY/ON) Mode switch Turns the power of the monitor on and off. 2 INPUT Selector buttons (TV, INPUT 1 to INPUT 6) Press the button to select the source you wish to watch. TV CBL The screen will display your selection.
  • Page 23 REMOTE CONTROL UNIT FUNCTIONS - SLEEP timer button @ VOL (volume) +, – buttons Each time this button is pressed, the display will change Press plus (+) button to increase the volume, press minus as follows. (–) button to decrease it. The display varies according to the remaining time.

  • Page 24: To Watch Tv

    TO WATCH TV Best Horizontal and Vertical Viewing Angle • The optimum viewing angle is 140˚ in horizontal and 45˚ in vertical. • Watch from at least 10 feet (3m) away from the screen (optimum viewing distance is 10 to 45˚...

  • Page 25: Adjust The Volume

    TO WATCH TV VHF L VHF H SUPER HYPER 7-13 14-69 A-5(95) A(14) J(23) Q(30) W+1(37) W+11(47) W+21(57) W+31(67) W+41(77) W+51(87) W+61(102) W+71(112) W+81(122) A-4(96) B(15) K(24) R(31) W+2(38) W+12(48) W+22(58) W+32(68) W+42(78) W+52(88) W+62(103) W+72(113) W+82(123) A-3(97) C(16) L(25) S(32) W+3(39) W+13(49) W+23(59)

  • Page 26: Checking The Menu

    CHECKING THE MENU Press MENU on the remote control unit. EDIT/ TV/SAT/DVD DTV/DVD TOP The MAIN MENU will be displayed on the screen. LEARN MENU MENU SOURCE Select the desired menu item using | or \ button of the DTV/SAT GUIDE POWER remote control unit, and press »...
  • Page 27 CHECKING THE MENU SOUND adjustment menu (See page 63) S O U N D S O U N D M T S : M A I N M T S : M A I N B A S S B A S S T R E B L E –...

  • Page 28: Auto Channel Preset

    AUTO CHANNEL PRESET The broadcast frequencies that can be received depend on your area. Memorize the broadcast stations that can be received in your area in the presets. Select TV. TV CBL /SAT /DTV POWER Press MENU and select SET UP by using INPUT the | or \ button and then pressing «...
  • Page 29 AUTO CHANNEL PRESET Select TV/CABLE MODE , then select the broadcast system to be received from AIR or CATV. • Ask your dealer or cable service station for the mode of your local CATV system. TV CBL /SAT A U T O C H A N N E L P R E S E T /DTV A N T E N N A :...

  • Page 30: Convergence Adjustment

    CONVERGENCE ADJUSTMENT Before convergence adjustment* , please choose a stabilized input signal* order to display a stable cross pattern. *1 Convergence adjustment ..Color deviation adjustment *2 Stabilized input signal ..Examples, DVD player, digital tuner, etc. Due to the differing magnetic fields in different locations, you may experience color deviation, that is inaccurate colors.
  • Page 31 CONVERGENCE ADJUSTMENT Move the red line onto the green line. Move the vertical line. ADJ CON V ERGENCE SET/ TV CBL ENTER /SAT /DTV POWER INPUT ADJUST MENU SCREEN DIGITAL MODE Move the horizontal line. SLEEP FREEZE SPLIT SEARCH SUB CH ADJ CON V ERGENCE SWAP DISPLAY...

  • Page 32: Program Block (V. Chip) Function

    PROGRAM BLOCK (V. CHIP) FUNCTION Since laws have been passed in the United States requiring a way of blocking undesirable programming, the V-chip has become a required component in television sets. The V-chip is a computer chip which decodes signals added to broadcast signals transmitted by television broadcasters.
  • Page 33 PROGRAM BLOCK (V. CHIP) FUNCTION <CANADIAN RATING SYSTEM> CANADIAN ENGLISH LANGUAGE RATING SYSTEM RATING Children Children 8 years and older General programming, suitable for all audiences Age-Base Parental Guidance Viewers 14 years and older Adult Programming Programming interned for children under age 8 Careful attention is paid to themes, which could threaten children's sense of security and well-being.

  • Page 34: Enter A Password

    PROGRAM BLOCK (V. CHIP) FUNCTION SETTING THE PROGRAM BLOCKING LEVEL Press MENU and select SET UP by using the | or \ button and then pressing « TV CBL /SAT /DTV button. (Refer to page 26.) POWER INPUT SCREEN DIGITAL Select PROGRAM BLOCK in the same MODE SLEEP...

  • Page 35: Mpaa Rating

    PROGRAM BLOCK (V. CHIP) FUNCTION Set BLOCK to ON. P R O G R A M B L O C K B L O C K : O N O F F U . S . A . R A T I N G S Y S T E M SET/ SET/ C A N A D I A N R A T I N G S Y S T E M...

  • Page 36: Parental Guidelines

    PROGRAM BLOCK (V. CHIP) FUNCTION Select and confirm the rank of the TV PARENTAL GUIDELINES. T V P A R E N T A L G U I D E L I N E S F V D L TV CBL SET/ T V –...
  • Page 37 PROGRAM BLOCK (V. CHIP) FUNCTION Select and then confirm the rank of the FRENCH RATING. F R E N C H R A T I N G V I E W TV CBL SET/ 8 + : V I E W E N G L I S H SET/ /SAT...
  • Page 38 PROGRAM BLOCK (V. CHIP) FUNCTION HOW TO REMOVE BLOCKING REMOVING BLOCKING IN FROM A PROGRAM IN PROGRESS MULTI-SCREEN MODE • If you choose a program that has a rating higher than your Just as in normal single-screen mode, programs are program blocking rating, the picture and sound will cut off blocked in SEARCH screen mode (see pages 44 and 45), and an enter password screen will appear.

  • Page 39: Changing Password

    CHANGING PASSWORD A password must be entered to turn program blocking on and off. The default password is '1234', but it is strongly recommended that you change the password. Press MENU and select SET UP by using the | or \ button and then pressing « TV CBL /SAT /DTV...

  • Page 40: Enter New Password

    CHANGING PASSWORD Enter new password. • Press numeric buttons ‘0’ through ‘9’ to enter a four-digit password and press the SET/ENTER button. TV CBL C H A N G E P A S SWO R D /SAT P R E S S N UM E R I C K E Y S /DTV T O D E F I N E N EW P A S SWO R D...

  • Page 41: Changing Screen Size

    CHANGING SCREEN SIZE SETTING SCREEN MODE Different source material have specific screen modes they should use. Some films are mode in Vista some in cinemascope etc. check video/DVD packaging for info. Regular TV program are 4:3, so 4:3 is the standard mode.

  • Page 42: Adjust The Screen Position

    CHANGING SCREEN SIZE TO ADJUST THE SCREEN POSITION When the screen mode is CINEMA WIDE or ZOOM, you can adjust the screen position by pushing the » or « button. During digital signal input, the position can be adjusted using the | or \ button.
  • Page 43 CHANGING SCREEN SIZE Adjust the screen position. • Adjustable range DIGITAL 31K : –10 to 10 DIGITAL 33K : –15 to 0 TV CBL /SAT /DTV POWER INPUT SET/ SET/ ENTER ENTER SCREEN DIGITAL MODE SLEEP H . P O S I T I O N SPLIT FREEZE SEARCH...

  • Page 44: Multi-Screen Function

    MULTI-SCREEN FUNCTION VIEWING TWO SCREENS (SPLIT screen) The screen can be split vertically, making it possible to view different images on the left and right. • The screen on left side is the main picture, and the other screen is the sub-picture.

  • Page 45: Searching For A Program On Adifferent Channel (Search Screen)

    MULTI-SCREEN FUNCTION SEARCHING FOR A PROGRAM ON A DIFFERENT CHANNEL (SEARCH screen) The screen can be made into nine or four different screens, making it possible to search for programs or enjoy multiple images. TV CBL /SAT Press the SEARCH button. /DTV POWER INPUT...

  • Page 46: Closed Caption Decode Function

    CLOSED CAPTION DECODE FUNCTION Closed caption broadcasting (character Press MENU and select CC by using the information) in the video signal allows the displaying of characters on the screen. This unit | or \ button and then pressing « has a closed caption decoder which allows, these titles to be displayed when receiving these button.

  • Page 47: Changing Channel Set Up

    CHANGING CHANNEL SET UP TO ADD OR DELETE PRESET CHANNELS Broadcast stations preset by auto channel preset which are unnecessary can be deleted. Broadcast stations you want to watch that were not preset by auto channel preset can be preset. You can add a name to a channel that has been added.
  • Page 48 CHANGING CHANNEL SET UP Select CHANNEL , then select a channel. C H A N N E L A D D / D E L A N T E N N A : C H A N N E L : 1 2 0 C H A N N N E L SET/ SET/...
  • Page 49 CHANGING CHANNEL SET UP Select LABEL and input the letters for the name you want to call this channel. • When adding a channel, a label of 4 characters can be input for the added channel. TV CBL /SAT /DTV C H A N N E L A D D / D E L POWER...

  • Page 50: Favorite Channel Setup

    CHANGING CHANNEL SET UP FAVORITE CHANNEL SET UP Assigning your favorite channels to the four buttons (blue, green, red and yellow) on the remote control unit makes it easy to call them up. Four channels can be assigned to each button, making it possible to set a total of 16 channels.

  • Page 51: Select Number

    CHANGING CHANNEL SET UP Select number. F A V O R I T E C H A N N E L Y E L L OW A N T SET/ SET/ 1 1 4 ENTER ENTER TV CBL /SAT /DTV POWER E X I T INPUT...

  • Page 52: Picture Adjustments

    PICTURE ADJUSTMENTS This device has five types of picture quality settings in memory. You can choose one from them or set the picture quality you desire and store it in memory. RECALL THE DESIRED SETTINGS TV CBL Press MENU and select PICTURE by /SAT /DTV using the | or \ button and then...
  • Page 53 PICTURE ADJUSTMENTS STORING THE SET PICTURE QUALITY IN MEMORY USER mode can be set for each input source: TV and INPUT 1 to INPUT 6. TV CBL /SAT Select the input source and show the /DTV POWER image on the screen. INPUT SCREEN DIGITAL...

  • Page 54: To Adjust The Picture Quality

    PICTURE ADJUSTMENTS TO ADJUST THE PICTURE QUALITY Adjust the picture quality when you want improve the quality of the picture you are watching. You can adjust the CONTRAST, BLACK LEVEL (brightness), COLOR, TINT and SHARPNESS. CONTRAST ... Adjusting the contrast to match the brightness of the TV CBL surroundings so it is easier to watch.
  • Page 55 PICTURE ADJUSTMENTS OTHER PICTURE QUALITY ADJUSTMENTS The following six fine adjustments are available. 1 PureCinema .... This function automatically detects movie film recorded at 24 frames per second, and converts it into a high quality 30 frames per second delivering the picture at the same rate as it was recorded.
  • Page 56 PICTURE ADJUSTMENTS 1 To adjust PureCinema This function automatically detects movie film recorded at 24 frames per second, and converts it into a high quality 30 frames per second delivering the picture at the same rate as it was recorded. NOTE: This can be used only during 480i signal input.
  • Page 57 PICTURE ADJUSTMENTS 3 To adjust 3D Y/C LEVEL Perform this adjustment when noises appear at the color borders of the image. NOTE: This function can be used only when viewing a source that has been connected to the antenna or composite video input terminal. Select 3D Y/C LEVEL .
  • Page 58 PICTURE ADJUSTMENTS 5 To adjust Scan Velocity Modulation (SVM) Screen contour definition can be selected as desired. NOTES: • This function cannot be used when SCREEN MODE is 4:3 NORMAL or PICTURE MODE is GAME. TV CBL • It cannot be used during RGB signal input. /SAT /DTV POWER...
  • Page 59 PICTURE ADJUSTMENTS 7 To adjust BLACK ENHANCE Changing the black part of the video signal automatically corrects the gradation of the black. NOTES: • The effectiveness varies according to the content of the video signal. • It cannot be used during RGB signal input. TV CBL /SAT Select BLACK ENHANCE .
  • Page 60 PICTURE ADJUSTMENTS 9 To adjust Luminance Transient Improvement (LTI) This enables you to switch the definition of the luminance signal. NOTES: • It cannot be used during RGB signal input. • It can be used only during PICTURE MODE PRO. TV CBL /SAT /DTV...
  • Page 61 PICTURE ADJUSTMENTS - To adjust WHITE BALANCE This enables you to adjust the color temperature to your taste. NOTE: It can be used only during PICTURE MODE PRO. Select WHITE BALANCE . TV CBL /SAT /DTV P I C T U R E POWER INPUT B L A C K E N H A N C E : O N...

  • Page 62: Changing Scan Mode

    CHANGING SCAN MODE This function switches the display on the screen between 480p (progressive scan) and 1080i (interlace scan) during 480i and 480p. Press MENU and select SCREEN by using the | or \ button and then pressing « button. (Refer to page 26.) TV CBL /SAT /DTV...

  • Page 63: Sound Adjustments

    SOUND ADJUSTMENTS WATCHING STEREO AND BILINGUAL PROGRAMS The multichannel TV sound (MTS) decoder enables stereo program and Second Audio Program (SAP) to be received. (SAP is often used for a second language). This MTS decoder can only be used if a broadcast of stereo program or SAP is received.

  • Page 64: To Adjust The Sound Quality

    SOUND ADJUSTMENTS TO ADJUST THE SOUND QUALITY BASS, TREBLE and BALANCE can be adjusted. Press MENU and select SOUND . (Refer to page 26.) TV CBL /SAT /DTV POWER INPUT Select the adjustment item. SCREEN DIGITAL MODE SLEEP SPLIT FREEZE SEARCH SUB CH S O U N D...
  • Page 65 SOUND ADJUSTMENTS TO SELECT THE DESIRED SURROUND MODE This function creates the sound with a sense of presence. In a concert hall or in a theater, you hear a mixture of sound coming directly to you (direct sound) and sound that reaches you with a slight delay after being reflected from the walls (indirect sound).
  • Page 66 SOUND ADJUSTMENTS TO ADJUST STABLE VOLUME A loud sound may suddenly be emitted when you change the TV channel or when the broadcast switches to a commercial or the like. If so, setting STABLE VOLUME to ON will enable you to automatically change the volume level to what is comfortable.

  • Page 67: Rls Function

    RLS FUNCTION The monitor has a sensor that automatically adjusts the black level, contrast and color of the screen in accordance with the light in the room. This is called the RLS (Room Light Sensor). You can adjust the RLS to react to a greater or lesser extent to the light in the room.

  • Page 68: Digital Interface

    DIGITAL INTERFACE PURE DIGITAL This function faithfully reproduces the input signal without any processing when digital signal input (INPUT 5, 6) is selected. Press MENU and select SETUP by using the | or \ button and then pressing « TV CBL /SAT /DTV POWER...

  • Page 69: Power Management

    DIGITAL INTERFACE POWER MANAGEMENT This function automatically turns on power management mode if no digital signal is input when digital signal input is selected. When digital signal input restarts, power management mode is cancelled. Press MENU and select SETUP by using TV CBL /SAT the | or \ button and then pressing «...

  • Page 70: Multi-Point Convergence Adjustment

    MULTI-POINT CONVERGENCE ADJUSTMENT Before convergence adjustment* , please choose a stabilized input signal* order to display a stable cross pattern. *1 Convergence adjustment ..Color deviation adjustment *2 Stabilized input signal ..Examples, DVD player, digital tuner, etc. Convergence adjustment may be fined-tuned here. Press MENU and select SETUP by using TV CBL /SAT...
  • Page 71 MULTI-POINT CONVERGENCE ADJUSTMENT Adjust the blue line. SET/ SET/ ENTER ENTER TV CBL /SAT /DTV A D J MUL T I P O I N T POWER S E T : NE X T P O I N T INPUT SELECT MENU EXIT...

  • Page 72: Connection With Receiver (1)

    CONNECTION WITH RECEIVER (1) The audio signal output from this unit can be reproduced on • Before making or changing connections, set the power the receiver when this monitor is connected to the receiver. switch to off and unplug the power cord from the AC outlet. When this monitor is connected to the CENTER OUT terminal •...
  • Page 73 CONNECTION WITH RECEIVER (1) SPEAKER and AUDIO OUT settings Press MENU and select SETUP by using the | or \ button and then pressing « button. (Refer to page 26.) TV CBL /SAT /DTV POWER INPUT Select SYSTEM IN/OUT in the same way. SCREEN DIGITAL MODE...

  • Page 74: Select The Audio Out Mode

    CONNECTION WITH RECEIVER (1) Select AUDIO OUT . • If the speaker mode was set to CENTER IN in step 4, the AUDIO OUT mode will automatically change to FIXED, and VAR cannot be selected. TV CBL /SAT /DTV S Y S T E M I N / O U T S Y S T E M MO D E : O F F POWER...

  • Page 75: Connection With Receiver (2)

    CONNECTION WITH RECEIVER (2) This unit can be used as the monitor for the receiver when this • Before making or changing connections, set the power unit is connected to the receiver. When this unit is connected switch to off and unplug the power cord from the AC outlet. to the CENTER OUT terminal of the receiver, the speaker of •...

  • Page 76: System Mode Setting

    CONNECTION WITH RECEIVER (2) SYSTEM MODE setting Press MENU and select SET UP . (Refer to page 26.) TV CBL /SAT /DTV POWER Select SYSTEM IN/OUT . INPUT SCREEN DIGITAL MODE SLEEP S E T SPLIT FREEZE SEARCH C H A N N E L S E T SUB CH C O N V E R G E N C E...

  • Page 77: Connecting The System Remote Control

    CONTROL CONTROL NOTES: • When the Pioneer unit with Î mark is connected to the CONTROL IN terminal of the projection monitor, the remote sensor of the projection monitor does not accept signals from the remote control unit. In this case, point the remote control at the this unit in the chain (the equipment with no CONTROL IN connection).

  • Page 78: Remote Code Set Up

    Select the desired manufacturer. • Select from the figure on page 79. • Example: To select 20 (PIONEER) in the LD mode. NOTES: • To stop the EDIT mode in the middle, press the EDIT button once more. • If mode switch is switched while in EDIT mode, EDIT •...
  • Page 79 REMOTE CODE SET UP Manufacturer's preset remote control codes CBL/SAT/DTV DVD/LD PIONEER 1 (CABLE) PIONEER PIONEER (DVD) PIONEER 2 (CABLE) FISHER PANASONIC (DVD) JERROLD 1 (CABLE) FISHER SAMSUNG (DVD) JERROLD 2 (CABLE) FISHER SONY (DVD) JERROLD 3 (CABLE) GOLD STAR...
  • Page 80 REMOTE CODE SET UP TO LEARN REMOTE CONTROL CODES To operate other manufacturers' remote control codes not preset using the remote control unit, have the remote control unit learn these signals. Example) To learn the VCR power to turn on. Before operation: TV CBL /SAT...
  • Page 81 REMOTE CODE SET UP • Buttons which can be learnt are as follows. Face the remote control unit of the other CBL ... SOURCE POWER, CH (+), CH (–), CH RETURN, CH ENTER, 1 to 9, 0 manufacturer's and the remote control SAT ...

  • Page 82: Receiver Control Buttons

    GUIDE POWER SET/ ENTER DTV/SAT INFO When a Pioneer receiver is connected to the Monitor, the VCR REC FAVORITE CH ¡ receiver can be operated using buttons 4 to 6. RECEIVER When another company’s receiver is connected to the Monitor, INPUT have the signals for 4 to 6 learned (see page 80).

  • Page 83: Cable Control Buttons

    REMOTE CODE SET UP CABLE CONTROL BUTTONS Mode switch CABLE, SAT and DTV cannot be selected at the same time. When the mode switch is set to CBL/SAT/DTV the cable converter connected to the Monitor can be operated using the TV CBL /SAT buttons 1 to 5.

  • Page 84: Sat Control Buttons

    REMOTE CODE SET UP SAT CONTROL BUTTONS Mode switch CABLE and SAT cannot be selected at the same time. When SAT is preset by REMOTE CODE SET UP , the remote TV CBL control unit buttons will function as shown below. /SAT /DTV •...
  • Page 85 REMOTE CODE SET UP DTV CONTROL BUTTONS CABLE, SAT and DTV cannot be selected at the same time. Mode switch When a digital tuner is connected to the monitor, set the mode switch to CBL/SAT/DTV. The tuner can be operated using buttons 1 to ~.

  • Page 86: Vcr Control Buttons

    REMOTE CODE SET UP VCR CONTROL BUTTONS Mode switch If the VCR is preset by REMOTE CODE SET UP , the remote control unit button will function as follows when the mode switch of the remote control unit is set to VCR. TV CBL When the input selector button having the same number as /SAT...
  • Page 87 REMOTE CODE SET UP DVD/LD CONTROL BUTTONS Mode switch DVD and LD cannot be selected at the same time. If the DVD/LD is preset by REMOTE CODE SET UP , the remote control unit button will function as follows when the mode TV CBL /SAT /DTV...

  • Page 88: Menu Index

    MENU INDEX PICTURE adjustment menu (See page 52) P I C T U R E P I C T U R E M O D E : S T D C O N T R A S T P u r e C i n e m a : S T D B L A C K L E V E L C O L O R T E M P :...
  • Page 89 MENU INDEX CHANNEL SET UP menu (See page 28) AUTO CHANNEL PRESET menu (See page 28) C H A N N E L S E T A U T O C H A N N E L P R E S E T A U T O C H A N N E L P R E S E T A N T E N N A : A C H A N N E L...

  • Page 90: Troubleshooting

    Sometimes the trouble may lie in another component. Investigate the other component and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work.
  • Page 91 The power was turned off momentarily due to the protection circuit to correct the electric discharge phenomenon in the CRT. Do not suspect fault. The POWER STANDBY indicator (red) is Please call your Pioneer serviceman. flashing. The POWER STANDBY indicator (green) Please call your service representative if the green indicator repeatedly flashes 3 is flashing.

  • Page 92: Specifications

    SPECIFICATIONS Display and amplifier section Tuner section Reception system ..American TV standard NTSC system Circuit type ........Video signal detection: PLL full synchronous detection Screen size ..........64" (PRO-730HD) 58" (PRO-630HD) PLL digital synthesizer system 53" (PRO-530HD) Audio multiplex: BTSC system CRT .............
  • Page 96 Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo 1009 3er Piso Desp. 302 Col. Del Valle Mexico D.F. C.P. 03100 TEL: 52-55-5688-5290 <TNSSF/02H00000>...

This manual is also suitable for:

Elite pro-630hdElite pro-530hd

Table of Contents