Related Manuals for Topex TX068
Summary of Contents for Topex TX068
- Page 1 SKU:TXSI60W068 TX068 OWNER'S MANUAL 60W DIGITAL SOLDERING STATION Thank you for buying this 60W DIGITAL SOLDERING STATION! Please read this manual carefully before using the product.
-
Page 2: Description Of Symbols
DESCRIPTION OF SYMBOLS GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may Save all warnings and instructions for future reference The term “power tool’’ in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 3 d. Store idle power tools out of the reach of children and 3. PERSONAL SAFETY do not allow persons unfamiliar with the power tool or a. Stay alert, watch what you are doing and use common these instructions to operate the power tool. Power tools sense when operating a power tool.
- Page 4 SOLDERING IRON WARNINGS DIGITAL SOLDERING STATION WARNING! The appliance is not to be used Device description by persons (including children) with The device consists of a digital soldering station with reduced physical, sensory or mental connected soldering iron and a soldering iron holder. capabilities, or lack of experience and knowledge, unless they have been given The soldering station produces temperatures of 200 °C...
-
Page 5: Specifications
Designation Designation Description 200°C temperature Temperature value will preselection button be set to 200 °C Control panel with LC display Indicates the current temperature Soldering station preselection (No. 17, Display of preselected Soldering iron holder 18, 19) and displays when the device Storage compartment for soldering sponge switches to standby operation... -
Page 6: Operation
• Avoid vibrations on the workpiece during the cooling The soldering tip (8) has a screw thread which allows to phase. This can lead to 'cold solder joints'. quickly and easily replace the soldering tip. • Prior to starting soldering work, use some solder to tin- 1. - Page 7 Note Note If the soldering temperature is too low, the solder is not Always use the soldering iron holder for the intervals liquid enough. The result are cold solder joints. If the while heating the soldering iron, for breaks between the soldering temperature is too high, the solder will burn work steps and while the soldering iron is cooling down which also prevents the solder from being liquid enough.
-
Page 8: Troubleshooting
Send the device to a specialist electrical 1. Press any button to exit the standby mode. company or to TOPEX to have the power cable and mains plug replaced. 2. Prior to starting soldering works, adjust the desired temperature as described in the Chapter Setting the •... -
Page 9: Caring For The Environment
2. If the tool has been operated on a supply voltage other Note: TOPEX will not be responsible for any damage or 3. If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. - Page 12 Contact: support@topto.com.au...
Need help?
Do you have a question about the TX068 and is the answer not in the manual?
Questions and answers