Warnings • To minimize shock and fire hazards, be sure not to overload the outlet. One outlet should be designated for the unit only. • Do not use extension cords. • Do not put your hands under the unit when moving. •...
Installation • If the unit has recently been transported, do not use it for a minimum of 24 hours before installation. • After 24 hours make sure that the unit is at the desired temperature before loading it with product. •...
Electrical Please ensure that the required voltage of the compressor is always constant. Low or high voltage can detrimentally affect the unit and thereby will void the warranty. • All units should be plugged into a grounded and properly sized electrical outlet with appropriate over-current protection.
Temperature Control Display Display and Functions During normal operation, the controller displays the ambient temperature. In addition, the display has LEDs that indicate the activation of the control functions (see Table 1), while the three buttons can be used to activate / deactivate some of these functions.
Regular Maintenance Cleaning Condenser • For efficient operation, it is important that the condenser surface be kept free of dust, dirt, and lint. • We recommend cleaning the condenser coil and fins at least once per month. • Clean with a commercial condenser coil cleaner, available from any kitchen equipment retailer.
ONE YEAR WARRANTY Berg warrants to the original purchaser of this unit, the unit cabinet and all parts thereof, to be free from defects in material and workmanship, under normal conditions of use and maintenance, for a period of one (1) year from the date of original purchase.
Page 12
Equipment or from any other cause relating thereto, whether arising in contract, tort, warranty, strict liability or otherwise. BERG’s liability hereunder in any case is expressly limited, at BERG’s election, to repair or replacement of, or crediting the user with, an amount equal to the purchase price of such goods.
Need help?
Do you have a question about the BRM-1D and is the answer not in the manual?
Questions and answers