Warnings All our equipment is designed for users with special needs. We suggest supervision at all times when using this equipment. For indoor use only. Do Not use free standing. The panel should be installed securely to the wall. Never use an abrasive cloth or any solvent such as paint thinner/mineral spirits, ammonia or chlorine based products.
Installation The wall panel must be installed against a permanent wall of solid construction. Brackets are supplied without screws or bolts. Proper screws or bolts will depend on the type of wall the panel will be attached to. The supplied brackets do not support the weight of the panel, they prevent the panel from being tipped or pulled off the wall only.
We recommend two people to lift the panel onto the wall brackets. Step 3 Identify the two brackets on the rear of the wall panel. Lift the panel gently and set slowly into place onto the wall brackets. Make sure the brackets are securely connected. The panel should stand on the floor if fitted correctly.
Guarantee CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period (as shown in 8 below) the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts thereof) repaired, or at our discretion, replaced free of charge.
Complies to: Toy Standard EN71 - part 1,2,3 Hand Wall Panel Size - 59"H x 47"W x 8"D (1500 mm H x 1200 mm H x 200 mm D) Weighs 108 lbs. (49 KG) Disclaimer No part of this manual may be reproduced in any form or by any means (graphic, electronic or mechanical, including recording, taping, photography or information retrieval system) without express written permission of the publisher of this material.
Need help?
Do you have a question about the SpaceKraft SP7176 and is the answer not in the manual?
Questions and answers