Table of Contents
Advertisement
Adjusting the Volume Settings
Adjust the volume settings to suit your needs and your
environment.
1.
Press
>
.
Sound
2.
Touch and drag the onscreen slider to assign the
volume settings for any of the following volume
levels and tap
.
OK
,
,
Ringtone
Media
Alarm
Note:
By default, the
Use incoming call volume for
field is active, in this case, the
notifications
slider is not accessible until it is disabled.
3.
Tap
OK
to assign the volume levels.
Vibrate
To set your device to vibrate for incoming calls and silent
for notifications:
Press the volume button down in standby mode
until you see
on the screen.
and tap
> Sound >
, or
.
Notification volume
Notification
To set your device to always vibrate for incoming calls:
1.
Press
>
Vibrate
.
2.
Tap a feature to enable or disable it. A checkmark
indicates the feature is enabled:
Always
: your device vibrates for all incoming calls
and notifications.
: your device uses sound only for all
Never
notifications and alerts.
Only in silent mode
: your device vibrates for
notifications and alerts when Silent mode is
active.
Only when not in Silent mode
vibrates for notifications and alerts when Silent
mode is not active.
To set your device to vibrate while using the dialpad:
1.
Press
>
2.
Tap
. (If you have already checked
Haptic feedback
the option, tapping it again deselects the option.)
and tap
> Sound >
: your device only
and tap
> Sound
.
2C. Settings
65
Advertisement
Table of Contents
