Table of Contents
Advertisement
The network names and security settings (Open
network or Secured with xxx) of detected Wi-Fi
networks are displayed in the Wi-Fi networks
section.
Note:
When you select an open network, you will be
automatically connected to the network.
2.
To manually add your new network connection:
Tap
Add Wi-Fi network
Enter the Network SSID. This is the name of your
Wi-Fi network.
Tap the
field and select a security option.
Security
This must match the current security setting on
your target network.
If secured, you will also need to enter your WAP's
password. The
show password option
password as you type it instead of only showing
asterisks (****).
Tap
Save
to store the new information and
connect to your target network.
.
, reveals the
Note:
The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the wireless password again, unless
you reset your device back to its factory default settings.
To manually scan for a Wi-Fi network:
1.
Press
>
Wireless & networks > Wi-Fi settings.
2.
Press
and tap
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status
at a glance:
– Wi-Fi is connected and active.
– Wi-Fi active but there is a communication
issue with the target Wireless Access Point
(WAP).
3B. Web and Data Services
and tap
>
.
Scan
155
Advertisement
Table of Contents
