Table of Contents
Advertisement
1.
With the microSD card installed, connect your
device to your computer using a compatible USB
cable. (Wait for the connection to be completed.
When connected, the host computer will
automatically detect your device.)
2.
Tap
Mass Storage
uses the connected USB cable to
Charging
charge the device via your computer's USB port.
Mass Storage
uses the connected USB cable to
provide data communication between the device
and your computer. The device then appears as
an external drive with its own drive letter.
Go to www.samsung.com and visit the
Transform™ Ultra Product page, where you
can navigate to the Support tab to obtain this
driver.
The online FAQ also provides detailed
information about this driver.
Ask on connection
when you connect to a computer.
To remove the connection:
When you finish transferring data, click the USB
device icon on your computer's taskbar, and follow
116
2H. microSD Card
from the
USB connection
asks for a connection type
the onscreen instructions to safely unplug the USB
cable.
Troubleshooting USB Connection
If there is ever a circumstance where your setup of the
device's USB connection has an issue, try these
screen.
troubleshooting tips.
1.
Verify your computer is able to access the Internet
prior to connection and that this connection is not
lost during these troubleshooting procedures.
Some system connections might require
additional setup data available online.
2.
Once the device is connected to the computer via
USB, select
connection setup.
Selecting the
connection.
Verify the device screen shows
3.
From the
the software automatically
4.
Select a connection to the Internet and click
Connect to PC
to begin the USB
option closes the USB data
Charge
Found New Hardware Wizard
and click
.
Connected to PC
, select
Install
.
Next
.
Next
Advertisement
Table of Contents
