Nikon D100 Manual page 103

4
Compose a photograph, focus, and shoot. Each shot will processed to
create the number of copies specified in the bracketing program, and each
copy will have a different white balance. Modifications to white balance
are added to the white balance adjustment made with white balance fine-
tuning ( 53).
When white balance bracketing is in effect, the
white balance adjustment indicator (
flash.
To cancel bracketing, press the BKT button and rotate the main command
dial until BKT is no longer displayed in the control panel on top of the
camera. The program last in effect will be restored the next time bracket-
ing is activated. Bracketing can also be cancelled by performing a two-
button reset (
not be restored the next time bracketing is activated.
NEF (Raw) and White Balance Bracketing
White balance bracketing can not be used with an image quality of NEF (Raw) or Comp.
NEF (Raw). Selecting either option cancels white balance bracketing. White balance for
NEF (RAW) images can be adjusted using Nikon Capture 3 (available separately;
Resuming White Balance Bracketing
If there is not enough memory remaining on the memory
card to record all shots in a white-balance bracketing
sequence, the shutter-speed display will show
the number of exposures remaining will blink, and the
shutter release will be disabled.
If the camera is turned off while the camera before all
photographs in a white-balance bracketing sequence
have been recorded, the camera will power off only af-
ter all photographs in the sequence have been recorded.
Controlling How the Camera Sets Exposure
110), although in this case the bracketing program will
) will
,
I I
I I
170).
I I
I I
91