Canon 580EX - Speedlite II - Hot-shoe clip-on Flash Instruction Manual page 37

C
7
Check the flash operation .
e Press the master units test firing button.
~ The slave .unit will fire . If the flash does not
1i re, adjust the slave unit's angle toward the
master unit and distance from the rnasler
unit-
8
Set the camera and shoot .
Set [he camera in the same way as with
normal flash shooting-
15M [49 .2ft.]
Outdoors
o Use the mini stand [tripod socket provided] to prop up the slave unit .
e Use the bounce feature to swing the slave uniYs flash body so that the wireless
sensor laces the master unit .
a Indoors, the wireless signal may also bounce off the wall so there is more IeFway
in positioning the slave unit(s)-
After positioning the slave unit(s), be sure to test the wireless operation before
shooting .
m Do not place any obstacles between the master unit and slave unit(s)..Obstacles
can block the transmission of wireless signals.
35
8m (26.2Ft .)
12m [39 .4ft.]