The Wide Panel - Canon 580EX - Speedlite II - Hot-shoe clip-on Flash Instruction Manual

ZOOM Setting the Flash Coverage and being the Wide panel m
The flash coverage can be set to match the lens focal length from 24mm to
105mm . The flash coverage can tae set automatically or manually. Also,
with the built-in wide panel, the flash coverage can be expanded to 14mm
wide-angle lenses .
~ETTL m Zoom ~~Imm ~
Press the ¢ZOflM 1- .> button .
0 Turn the r@ > dial to change the flash
coverage .
o When the flash coverage is 59t
.5 0 . 7 1 1.5 2 3 ¢ 6 9 ~3 18 mJ
automatically, <pn is not displayed.
LEI If you set the flash coverage manually, make Sure it covers the lens focal length so that
the picture will not have a dark periphery.
Using the Wide Panel
Pull out the wide panel and place it over the
- - flash flash head as shown. The flash oaverage
will then be extended to 14mm .
s The catchlight panel will come out at the
same time . Push the catchlight panel back
in .
` - ' - v The r20flM 1'z+ > button will not work .
H m If you use bounce flash with the wlde panel in place, the entire display on the LCD
panel will blink as a %%-or ning. Since the subjec[will6e illuminated by loth the bounce
flash and direct flash, it will loch unnatural .
9 Pull out the wide panrsl gently. Using excessive force may detach the wide panel .
b If the vide panel is accidentally r3efached, the
c 700M I 'z, > button will not work. The zoom - _
feature will work again when you press the spot
------ - --- ----
.
` : - ' = - - s h o w n
6y the arrow. The entire display on the
LCD panel will blink, but the Speedlite will work
normally.
11 The flash coverage will notbe compatible with the EFi5mn f12 .8 Fisheye lens.
20