Installing the Drivers
3
Windows
®
Windows Me/2000/XP
1. After following all of the steps on page 2, Windows will automatically detect the device as
a "USB Mass Storage Device" and install the drivers.
Note: If the above dialog box appears, simply select the Recommended option for
Windows to install the drivers automatically and click Next.
2. After driver installation is completed, restart your computer.
3. After restart, the drive will appear in your My Computer as "WDC USB2."
4. Your Western Digital USB 2.0 external hard drive is preformatted as one FAT32 partition
and is now ready to use.
Setup
INSTALLING THE DRIVERS - 4