Contents Safety information What you need to know about the safety instructions Important safety symbols Important safety precautions CALIFORNIA PROPOSITION 65 WARNING Critical installation warnings Installation cautions Critical usage warnings Usage cautions Critical cleaning warnings Care for preventing freezing Regulatory notice FCC Notice IC Notice Open Source Announcement...
Page 3
Operations LCD panel Operating a cycle Cycle overview Cycle chart Settings Special features SmartThings Maintenance Product Care Drum Clean+ Emergency drain Cleaning Recovery from freezing Care for an extended period of non-use Cleaning the exterior Exhaust system Vent sensor Cleaning the interior Troubleshooting Checkpoints Information codes...
Safety information Congratulations on your new Samsung Laundry Combo. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your Laundry Combo’s many benefits and features.
Page 5
WARNING - Risk of Fire • Laundry Combo installation must be performed by a qualified installer. • Install the Laundry Combo according to the manufacturer’s instructions and local codes. • Do not install a Laundry Combo with flexible plastic venting materials.
Page 6
Safety information WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode.
Page 7
WARNING - Fire or explosion hazard • Failure to follow safety warnings exactly could result in serious injury, death or property damage. • Do not store or use gasoline or other flammable vapors and liquids near this or any other appliance. •...
Safety information Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 2. DO NOT wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.
15. DO NOT use heat to dry articles containing foam rubber or similarly textured rubber-like materials. 16. Keep area around the exhaust opening and adjacent surrounding areas free from the accumulation of lint, dust, and dirt. 17. The interior of the appliance should be cleaned periodically by qualified service personnel. 18.
Page 10
Safety information Plug the power cord firmly into a wall socket that meets local electrical specifications. Use the socket for this appliance only, and do not use an extension cord. • Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
Following the repair by a non-authorized service provider, self-repair or non-professional repair of the product, Samsung is not liable for any damage to the product, any injury or any other product safety issue caused by any attempt to repair the product which does not carefully follow these repair and maintenance instructions.
Page 12
Safety information In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do not touch the appliance or power cord. • Do not use a ventilating fan. • A spark may result in an explosion or fire. Remove all door levers before disposing of the appliance.
• Failure to do so may result in electric shock or fire. If any foreign substance enters into the appliance, unplug the power cord and contact your nearest Samsung Customer Service. • This may result in electric shock or fire.
Page 14
Using the appliance for business purposes qualifies as an appliance misuse. In this case, the appliance will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse.
Page 15
Do not touch the inside of the glass door and the drum after washing and drying as those parts may become hot and could cause burns. Do not insert your hand into the detergent drawer. • This may result in injury as your hand may be caught by the detergent input device. Remove the liquid detergent guide (applicable models only) when using powdered detergent.
Page 16
Safety information Make sure that the pockets of all the clothing items are empty. • Hard, sharp objects such as coins, safety pins, nails, screws, or stones can cause extensive damage to the appliance. Do not wash or dry clothing with large buckles, buttons, or other heavy metal objects. Sort the laundry by color on the basis of its colorfastness and select the recommended cycle, water temperature and additional functions.
Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use a strong acidic cleaning agent. Do not use benzene, thinner or alcohol to clean the appliance. • This may result in discoloration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the appliance from the wall socket.
Regulatory notice FCC Notice CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1.
Page 19
Model WD90F53AV* WD90F53AV* Variant model Asterisk (*) varies from A through Z which indicates the color of the appliance. Samsung Electronics America, Inc. 85 Challenger Road Responsible Party - U.S. Contact Information Ridgefield Park, NJ 07660 Phone : 1-800-SAMSUNG (726-7864) This device complies with Part 15 of the FCC Rules.
Regulatory notice IC Notice The term "IC" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Installation Follow these instructions carefully to ensure proper installation of the Laundry Combo and to prevent accidents when doing laundry. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve and pump.
If your Laundry Combo was damaged during shipping, or you do not have all of the items, call 1-800-SAMSUNG (1-800-726-7864). To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.
What’s included Make sure all the parts are included in the product package. If you have a problem with the Laundry Combo or the parts, contact a local Samsung customer center or retailer. NOTE The appearance of the actual product may differ from the image shown.
• The appearance of the Laundry Combo and provided accessories may differ with the model. • To purchase an accessory or lost part, contact a local Samsung service center or retailer. Water hoses are not sold in Samsung service center or retailers.
Installation • Make sure rubber washers are inserted in each coupling of both water hoses. Installation requirements Electrical connections Before operating or testing, follow all grounding instructions in the “ Grounding” section. An individual branch (or separate) circuit serving only your Laundry Combo is recommended. Do not use an extension cord.
• Before using the Laundry Combo for the first time, check all connections at the water valve and taps for any leaks. Drain Samsung recommends a standpipe 18 in. (460 mm) high. The drain hose must be connected through the hose clip to the standpipe, and the standpipe must fully cover the drain hose. Flooring For best performance, the Laundry Combo must be installed on a solid floor.
Installation Dimensions A. Overall height 43.7 in. (1110 mm) B. Width 27 in. (686 mm) C. Depth with door open 56.3 in. (1430 mm) D. Depth 34.4 in. (875 mm) Clearance requirement Alcove or closet installations Minimum clearance for stable operation Sides Rear Front...
Page 29
Custom cabinet and side-by-side installation 1 in. (25 mm) 1 in. (25 mm) 1 in. (25 mm) 2 in. (50 mm) CAUTION Please be aware of the following when installing and using the product. • After plugging the power plug, make sure the power cord does not get pressed or pinched by the product while you push it into the final installation position.
Installation Ducting requirements Use only for short-run Recommended installation Weather hood type 4” (10.2 cm) 2.5” (6.4 cm) No. of 90° elbows Rigid Rigid 80 ft. (24.4 m) 74 ft. (22.6 m) 68 ft. (20.7 m) 62 ft. (18.9 m) 57 ft.
Exhausting requirements The Laundry Combo must not be exhausted into a chimney, a wall, a ceiling, an attic, a crawl space, or a concealed space of a building. Exhausting the Laundry Combo to the outside will prevent large amounts of lint and moisture from being blown into the room.
Installation Electrical requirements The wiring diagram is located on the plate under the control panel or rear frame. WARNING • Improperly connecting the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your Laundry Combo is properly grounded.
Step-by-step installation Make sure you have a qualified technician install the Laundry Combo. Step by step installation instructions start below. • Do not remove the protective film on the door before completing the product installation. If you remove the protective film before the installation is complete, the door may get scratched or damaged during installation.
Page 34
Installation • Packaging materials can be dangerous to children. Dispose all packaging material (plastic bags, polystyrene, etc.) out of children’s reach. STEP 3 Adjust the leveling feet 1. Gently slide the Laundry Combo into position. Excessive force may damage the leveling feet. 2.
Page 35
STEP 5 Connect the electrical wiring (for electric models) Before connecting the electrical wiring, make sure you have read the “ Electrical requirements” section on page 32. 3-wire system 1. Loosen or remove the screws from the center terminal block. 2. Connect the neutral wire (white or center wire) of the power cable to the center, silver-colored terminal screw of the terminal block.
Page 36
Installation 4-wire system 1. Remove the external ground connector’s screw and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
Page 37
CAUTION Connect the power cord and check L1/L2/D (N) voltage. If the voltage is low, it may not heat properly. Review the “Electrical requirements” section on page 32 if needed. WARNING • All U.S. models are designed for a 3-wire system connection. The Laundry Combo frame is grounded to the neutral conductor at the terminal block.
Page 38
• If there is a water leak, stop using the Laundry Combo and contact a local Samsung service center. A water leak may cause electric shock. • Do not stretch the water hoses by force. If a hose is too short, replace the hose with a longer hose.
Page 39
3. Put the other ends of the hoses into a bucket, and then open the water taps for 10 - 15 seconds to remove impurities. When done, close the taps. 4. Attach the water hoses to the hot and cold water inlets on the back of the Laundry Combo, and then hand tighten the water hose fittings until they are tight.
Page 40
Installation Using the short hose as an extension To install this product with another washer, use the separately sold Y-connector. 1. Close the water tap. If you have a washer's water hose attached to the water tap, unscrew and remove the hose.
Page 41
STEP 7 Connect the drain hose To a Laundry Tub or Drain Pipe 1. Check the height (A) of your drain system and make sure the minimum and maximum heights shown below are met. Minimum 18 in. (46 cm) Maximum 96 in. (245 cm) NOTE •...
Page 42
Installation Over the edge of a wash basin The drain hose must be placed no lower than 24 in. (60 cm) and no higher than 35 in. (90 cm) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A).
Vent blockage test After the Laundry Combo is installed, run the Vent Blockage Test function to check if the duct system is properly installed. Vent Blockage Test automatically detects the status of the ducts and reports any blockage or problems. Proper ducting can reduce drying time and save energy. NOTE The Vent Blockage Test function must run when the Laundry Combo is cool.
Installation Exhaust ducting guide Ducting 1. Make sure the Laundry Combo is installed properly so the air exhausts freely. 2. Use 4-inch rigid metal ducts. Tape all joints including the combo connection. Never use lint-trapping screws. 3. To facilitate the exhaust, keep the ducts as straight as possible. Cleaning Clean all old ducts before installing the Laundry Combo, and make sure the vent flap opens and closes freely.
Before you start Initial setup • When you turn on the Laundry Combo for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it. • Once you select a language, the language selection screen will not reappear. However, you must complete a wash cycle once to stop the tutorial screen from reappearing.
Before you start Laundry guidelines STEP 1 Sort Sort the laundry according to these criteria: • Care Label: Sort the laundry into cottons, mixed fibers, synthetics, silks, wools, and rayon. • Color: Separate whites from colors. • Size: Mixing different sized items together in the drum improves the washing performance. •...
Page 47
STEP 4 Determine the load capacity Do not overload the Laundry Combo. Overloading may cause the Laundry Combo to wash improperly. NOTE When washing bedding or bedding covers, the wash time may be lengthened or the spin efficiency may be reduced. For bedding or bedding covers, the recommended maximum spin level is Low or Medium , and the load capacity is 7 lb (3.0 kg) or less.
Before you start Detergent drawer guidelines NOTE Auto dispensers make laundry easier by dispensing the preset amount of washing agents without you having to pour it in every time, and it could be more economical because the exact amount will be dispensed each time of use, allowing less waste of washing agents.
Page 49
• Use caution when inserting the Aqua Pebble as it is supposed to be balanced on top of the laundry at the beginning of the wash. Tipping the Aqua Pebble before the start of a wash may cause detergent residue to remain on the laundry at the end of the wash, causing discoloration of the laundry or reduced washing performance.
Page 50
Before you start To use bleach Add only liquid chlorine bleach to the Manual bleach dispenser. Do not exceed the max line. CAUTION • Do not add the liquid bleach without the liquid detergent guide in the Manual bleach dispenser. •...
Page 51
To apply washing agents to the Auto dispensers NOTE If the message " Needs refill " appears on the display, refill the corresponding dispenser. • The detection time may vary depending on the type of the detergent/softener. 1. Press the Compartment cover to open it. 2.
Page 52
Before you start 6. Apply an appropriate amount of detergent (General detergent or Specialty detergent) or softener to the Flex auto dispenser (D). After you finish, put the cap back and turn it clockwise to close. 7. Push the Auto dispensers back into their positions. 8.
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the Safety information before operating this Laundry Combo. LCD panel Tap to turn the Laundry Combo on or off. 01 Power The display shows current cycle information and estimated time remaining, or 02 Display an information message when a problem occurs.
Operations Display icon descriptions Home Tap to go to the Home screen. • This icon indicates the door is locked and cannot be opened. Door Lock • The door locks automatically during a cycle and this icon turns on. • You can open the door when this icon disappears. Smart Control •...
Page 55
This icon appears during a dry-only cycle or a washing process. Tap cycle card to change the default wash cycle settings. You can see the full option list by tapping button. • Dryness : Tap to change the dry level. You can select from 4 different levels , but the available level depends on the selected cycle.
Operations Operating a cycle 1. Tap to turn the power on. 2. Select the desired cycle. For more information on Cycle overview, see page 57. 3. Change the default cycle options. For the washing process, tap Temp. , Spin , Soil , Detergent , Softener , Extra Rinse , or Bubble Soak to change the default cycle settings.
Cycle overview Cycle descriptions You can add or delete cycles to personalize the cycle list in the My cycles option. See page 70 for more information. NOTE • Energy savings will vary depending on the installation conditions, loads and cycles. Energy consumption could increase if the LCD screen is set to stay on all year long.
Page 58
Operations Cycle Description Heavy Duty • For sturdy, colorfast fabrics and heavily soiled items. • For lightly soiled items that you want to finish washing quickly. Small Load • For best performance, recommended load is 4 lb (2.0 kg) or lower. •...
Page 59
Cycle Description • This cycle washes items in low-temperature water to prevent Colors discoloration. • For wash-and-wear, synthetic fabrics, and lightly to normally soiled Perm Press items. • For normally and lightly soiled items. This cycle uses only cold water Eco Cold to save energy.
Operations Cycle chart Use this chart to set the best cycle and options for your laundry. Wash Cycle chart : factory setting, : can be selected Functions Cycle Temp. Extra Hot Warm Cold Tap Cold Normal ...
Page 61
Functions Spin Wash Only Wash & Dry Cycle Rinse Drain Extra Extra Hold Extra High Medium & No High Medium High & No High Spin Spin Normal AI Opti Wash & Dry ...
Page 62
Operations Functions Soil level Cycle Bubble Soak Extra Rinse Extra Extra Heavy Normal Light Heavy Light Normal AI Opti Wash & Dry Super Speed Heavy Duty ...
Page 63
Dry Cycle chart NOTE For best drying results, avoid overloading or underloading. Cycle Recommended items Temp. Normal Cotton, mixed loads of cotton and synthetic fabrics Medium AI Opti Wash & Dry Cotton, mixed loads of cotton and synthetic fabrics Medium Super Speed Synthetic fabrics High...
Page 64
Operations : factory setting, : can be selected Functions Cycle Dryness Wrinkle Dry Time Dry Prep Eco Dry Prevent More Normal Less Damp Normal : wash+dry : dry only AI Opti Wash & Dry ...
Drying guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Items Description Follow the care label instructions or dry using Bedding. Bedspreads &...
• When you select an additional function, a brief help message appears for the first ten times of use. Settings menu description General Options Descriptions You can log in to your Samsung account or create a new Samsung Samsung account account. English Untitled-13 66...
Page 67
Options Descriptions You can turn the Wi-Fi on or off. You can also start the Smart Control function. • Wi-Fi : Tap to turn on or off the Wi-Fi. The Laundry Combo's Wi-Fi is off as a factory default setting. However, the Laundry Combo's Wi-Fi turns on automatically when you turn on the Laundry Combo for the first time.
Page 68
Operations Options Descriptions You can lock the control of the Laundry Combo to prevent children or infants from accidentally starting or setting the Laundry Combo. • When Lock is enabled, the touch screen and the door become locked for safety. •...
Page 69
Options Descriptions You can set the Voice wake-up and Sound feedback options. NOTE • The microphone for voice recognition is built into the Laundry Combo's worktop. The best way to use the voice recognition function is to stand Bixby within 3 feet (1 meter) of the Laundry Combo, reduce any background noise, and speak loudly and clearly at a steady pace toward the built-in microphone.
Page 70
Operations Options Descriptions You can download and install the latest version of the software. Software update Download begins automatically when the Laundry Combo is connected to Wi-FI. You can check the user guide or start the remote support service. Support •...
Page 71
Options Descriptions You can select the dispenser mode and set the detergent type, concentration, and amount setting. The Laundry Combo automatically dispenses an adequate amount of detergent for the selected cycle. • Dispenser mode : You can select the Dispenser mode . The default setting is General detergent and Softener .
Page 72
Operations Options Descriptions You can set the Laundry Combo door to open automatically after the cycle is finished. • The default setting is Open immediately . However, if you perform only the washing process, the Open 5 mins later setting applies. •...
Page 73
Delay End You can set the Laundry Combo to finish your wash automatically at a later time, choosing a delay of between 5 hours to 24 hours. 1. Select a cycle and change the cycle settings as necessary. 2. Tap Delay End at the bottom of the Cycle screen. 3.
Operations Special features Smart Control You can connect to the SmartThings app and control your Laundry Combo remotely. Connecting your washer 1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS). 2. Tap to turn on the washer. 3.
You must first log into SmartThings with your Samsung account. To create a new Samsung account, follow the instructions on the app. You don’t need a separate app to create your account. NOTE If you have a Samsung account, use the account to log in. A registered Samsung smartphone or tablet user automatically logs in. English 75...
Page 76
Operations To register your appliance to SmartThings 1. Make sure your smartphone or tablet is connected to a wireless network. If not, go to Settings and turn on the wireless connection and select an AP (Access Point). 2. Open SmartThings on your smartphone or tablet. 3.
Maintenance Keep the Laundry Combo clean to prevent deteriorated performance and to preserve its life cycle. WARNING • Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve and pump.
Maintenance Drum Clean+ Certain usage and environmental conditions may result in some residue build-up or odor in the drum. To prevent this build-up or odor and keep the drum fresh and clean, perform the Drum Clean+ cycle at least once a month or every 40 cycles. Perform the recommended procedure below when using the Drum Clean+ cycle.
Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the Laundry Combo from the electrical outlet. 2. Press the Compartment cover to open it. 3. Pull out the Auto dispenser (A). 4.
Maintenance 7. Insert the Auto dispenser (A) back into the place. 8. Close the Compartment cover. NOTE Use a spacious container because the water in the drum may be more than expected. Cleaning Surface of the Laundry Combo Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the Laundry Combo. Mesh filter Clean the mesh filter of the water hose once or twice a year.
NOTE • If the mesh filter is clogged, an information code of " 4C" appears on the screen. • Clean the mesh filter of the water hose more frequently if water is provided by an aged water system or well. Drain filter It is advisable to clean the drain filter every 2 months to prevent its clogging.
Page 82
Maintenance 7. Reinsert the drain filter, and turn the filter knob to the right. NOTE Some drain filters feature a safety knob that is designed to prevent accidents by children. To open the safety knob of the drain filter, push in and turn it to the left. The spring mechanism of the safety knob helps open the filter.
Page 83
1. Press the Compartment cover to open it. 2. Pull out the Auto dispensers. 3. Remove the lids of both dispensers using the pull tabs at the back of each lid. 4. Clean the dispensers and all the other components under warm running water with a soft brush.
Page 84
Maintenance 5. Remove the dispenser tray and clean it in running water to remove leaked detergent or softener. Then, put the tray back. 6. Push the Auto dispensers back into their positions. CAUTION • Make sure the dispenser recess is completely dry before inserting Auto dispensers.
Door diaphragm 1. Open the door, and then empty the drum. 2. Combine 3/4 cups of liquid chlorine bleach and 1 gallon of warm tap water. 3. Wearing rubber gloves, use a soft, clean cloth dipped in the water and bleach solution to clean the diaphragm.
Page 86
Maintenance 4. Remove lint on both inner and outer filters. Then, wash the filters in running water and completely dry the filters in a shade. 5. Put the inner filter into the outer filter in the correct direction. 6. Insert the assembled lint filter back into the place. WARNING Moisture may remain in the lint filter after using a high-temperature washing cycle because of temperature differences.
Recovery from freezing The Laundry Combo may freeze when the temperature in its location drops below 32 °F (0 °C). 1. Turn off the Laundry Combo, and then unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3.
Maintenance Vent sensor The Laundry Combo features a vent sensor that detects and notifies you when it is time to clean the ductwork. Check the following if you get the “ Clean the lint filter or check if the vent is clogged to make sure items dry properly”...
Troubleshooting If a problem persists, contact a service center. The number of the service center is on the label attached to the product. Checkpoints If you encounter a problem with the Laundry Combo, first check the table below and try these suggestions. Problem Action •...
Page 90
Troubleshooting Problem Action • Make sure the Laundry Combo is installed on a level, solid floor that is not slippery. If the floor is not level, use the leveling feet to adjust the height of the Laundry Combo. • Make sure the shipping bolts are removed. •...
Page 91
Problem Action • Tap to stop the Laundry Combo. • It may take a few moments for the door lock mechanism to disengage. • The door will not open until 3 minutes after the Laundry Combo has stopped or the power has been off. •...
Page 92
Troubleshooting Problem Action • Fully open both taps. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct taps. Flush water lines. • Make sure the water heater is set to supply a minimum of 49 °C hot water at the tap.
Page 93
Problem Action • Always make sure the lint filter is clean before putting items into the Laundry Combo. When drying items that generate a large amount of lint, you may need to clean the lint filter in the middle of a cycle. The clothes have lint on •...
Page 94
Troubleshooting Problem Action • After refilling the Auto dispenser and Flex auto dispenser, close the The " Needs refill " detergent drawer, and then tap and hold . Then, the Laundry Combo message does not will start to detect the detergent/softener, and the message will disappear after refilling disappear.
Information codes If there is any problem, check the information message on the LCD screen and follow the on-screen instructions. Problem Code Action • The Laundry Combo isn't draining properly. • Clean the drain filter, then tap Start to restart the Laundry Combo.
Page 96
Check filter is inserted restart the Laundry Combo. Or, turn it off and on again correctly after 2-3 minutes, then try again. If any information code keeps appearing on the screen, contact a local Samsung service center. English Untitled-13 96 Untitled-13 96...
Specifications Fabric care chart The following symbols provide garment care Normal direction. The clothing care labels include Permanent press/Wrinkle resistant/ symbols for drying, bleaching, drying and ironing, Wrinkle control or dry cleaning when necessary. The use of symbols ensures consistency among garment Gentle/Delicates manufacturers of domestic and imported items.
Specifccaiion Warning symbols for laundering Dry-clean Do not wash Dry-clean Do not wring Do not dry-clean Do not bleach Line dry/Hang to dry Do not tumble dry Drip dry No steam (added to iron) Dry flat Do not iron Protecting the environment •...
Specification sheet Front loading washer Type WD90F53AV*** Capacity (Cu.ft) Water pressure (psi (kPa)) 20-116 (137-800) NET weight (lb (kg)) 298 (135.0) Spin revolution 1200 rpm Washing 1300 W Heating rating Drying 5300 W Washing 200 W Washing and 1500 W heating Power 120 V / 240 V...
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale and/or proof of delivery must be presented upon request to SAMSUNG or SAMSUNG’s authorized service center to receive warranty service.
Page 101
Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues.
Page 102
LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, SAMSUNG may elect to provide transportation of the product to and from an authorized service center. SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above.
Page 104
OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Page 108
ENERGY STAR. Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-Samsung (726-7864) www.samsung.com/ca_fr/support (French) Untitled-13 108 Untitled-13 108...
Need help?
Do you have a question about the F900 Series and is the answer not in the manual?
Questions and answers