Listening To Fm/Am Broadcasts - JVC NX-PN7 Instructions Manual

Listening to FM/AM Broadcasts

Basic Operations
Buttons
On the Unit On the remote
—
—
Selects FM or AM as the source.
FM AM
AUDIO IN
When an FM programme is broadcast in stereo, ST (stereo)
lights up on the display (only when the reception is good).
Press: Changes the frequency.
Hold down and release: The unit starts searching for stations
and stops when a station of sufficient signal strength is found.
• To stop searching, press again.
Tunes in to a preset station: Press repeatedly to select a preset
station number. (For presetting stations, see page 16.)
Changes the FM reception mode: When an FM stereo
broadcast is hard to receive or noisy, press to improve
reception. MONO (monaural) lights up on the display.
Reception will improve though the stereo effect is lost.
• To restore the stereo effect, press again.
Functions
15