Pioneer PD-77 Operating Instructions Manual

@) PIONEER'
The Art of Entertainment
Ploy
COMPACT DISC PLAYER
LECTEUR DE COMPACT DISC
ie
Operating Instructions
Mode d'emploi
English
(oll S65
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know
how to operate your model properly. After you have finished reading
Frangais
the instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes differ from that shown in the
explanatory drawings. However, the method of connecting and
operating the unit is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian model]
CAUTION: to PREVENT ELECTRIC SHOCK DO NOT USE
THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: pour PREVENIR LES CHOCS ELECTRIQUES
NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE
SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE
INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.
"This product complies with the Radio Interference require-
ments of the EC (European Community) Directive 87/308/EEC."
TWO VOLTAGE SELECTOR SWITCHES
Only multi-voltage models are provided with these
switches. U.S., Canadian, European, U.K., and
Australian models are not provided with these
switches.
Mains voltages in Saudi Arabia are 127V and 220V
only. Never use this model with 110V setting in Saudi
Arabia.
The line voltage selector switches are located on the rear
panel of this player. Before your player is shipped from the
factory, these switches are set to the power requirements
of the player's destination. Check that they are 'set properly
before plugging the power cord into the outlet. If the voltage
is not properly set or if you move to an area where the
voltage requirements differ, adjust the selector switches as
follows:
e@ Use a medium-sized (flat blade) screwdriver. Insert the
tip of the screwdriver into the groove of the selector
switches and turn it so that the power voltage making of
your area points to the arrow. Be sure to adjust both
switches.
VOLTAGE SELECTOR
e Use this player with 220 V setting in 230 V area.
{Singapore model only)