Table of Contents
Advertisement
Quick Links
Operating
Instructions
COMPACT
DISC PLAYER
D=-7030
WISE
(Only the U.S. military model
comes
with two side
panels)
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly, After you have
finished
reading the instructions,
put them away in a safe
place for future reference.
DIGITAL AUDIO
necting and operating the unit is the sare.
WARNING:
To prevent FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
NOTICE
[For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
[For Canadian model]
CAUTION:
to prevent ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION:
pour prevenir Les CHOCS ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
UN PROLONGATEUR UNE PRISE DE COURANT OU UNE
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE
A DECOUVERT.
LINE VOLTAGE
SELECTOR
SWITCH
Onty
muiti-voltage
modeis
are
provided
with
this
switch. U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
The
line voltage
selector
switch
is located
on
the rear
panei
of this player.
Before your player
is shipped from
the factory,
the switch
is set to the power
requirements
of the player's
destination,
Check
that it is set properly
before
plugging
the
power
cord
into the outlet.
Hf the
voltage is not properly set or if you move to an area where
the voltage requirements
differ, adjust the selector switch
as follows:
@
Use a medium-sized
(flat-biade)
screwdriver.
Insert the
tip of the screwdriver
into the groove of the selector
switch and turn it so that the power voltage marking of
your area points to the arrow.
2205
AGE SELECTOR
TEUR
SE
TENSIO
ne
"This product is manufactured to comply with the radio in-
terference requirements of EEC Directive 76/889/EEC and |
82/499/EEC.""
|
Advertisement
Table of Contents
Need help?
Do you have a question about the PD-7030 and is the answer not in the manual?
Questions and answers