Advertisement
Quick Links
Getting Started
Connect the power cable to the power
1
connector on the back wall of the device.
Connect your laptop to the HDMI port
2
on the back wall using an HDMI cable.
Adjusting the Image
(1) Open the front door by pressing the upper left corner. (2) Rotate both adjustment knobs to release the angle adjustment.
(3) Move the angle adjustment knobs up or down to adjust the image height.
support.artomeusa.com
support@artomeusa.com
Artome Remote
US 1.0
Quick User Guide
POWER
Turns the device on and off.
SOURCE
Selects the source between connected
devices.
MENU & BACK
Opens the projector menu. Use the
arrow keys to navigate. Press "Back"
to go to the previous menu level.
AV MUTE (PAUSE)
Turns off the image and the sound.
VOLUME & MUTE
Adjusts the volume.
AUDIO ONLY
Activates audio only mode. Press again
to return to projection mode.
FREEZE
Freezes the image, but not the sound.
Long pressing enables motorized
focusing with VMZ6ST/VMZ7ST.
Advertisement
Related Manuals for ARTOME X10
Summary of Contents for ARTOME X10
- Page 1 Quick User Guide Getting Started Artome Remote POWER Turns the device on and off. SOURCE Selects the source between connected devices. MENU & BACK Opens the projector menu. Use the Connect the power cable to the power arrow keys to navigate. Press "Back"...
- Page 2 Uses speakerphone as the audio source Artome Hybridock (USB) Artome Hybridock Artome speakers play back the video call audio Uses Artome MIC 1 or MIC 2 connection as the audio source • the mic sound plays back from the Artome speakers in PT-VMZXX (HDMI)
Need help?
Do you have a question about the X10 and is the answer not in the manual?
Questions and answers