Advertisement
Advertisement
Table of Contents
Related Manuals for AUDAC NMP40
Summary of Contents for AUDAC NMP40
- Page 1 NMP40 User Manual...
- Page 2 However, updates on the specifications, functionality or software may have occurred since publication. To obtain the latest version of both manual and software, please visit the Audac website @ www.audac.eu. The Spotify software is subject to third party licenses found here:...
- Page 3 EC Declaration of Conformity Waste of Electrical and Electronic Equipment (WEEE) 7 Chapter 1: Connections and connectors Connection standards Chapter 2: Overview NMP40 Chapter 3: Using the NMP40 Module screen Spotify connect Soundtrack your brand Troubleshooting hapter 4: Web interface & configuration...
- Page 5 The NMP40 SourceCon™ network audio player enables the possibility to stream audio files from various music streaming services directly to a professional audio system while maintaining the best available sound quality.
- Page 6 SHOULD BE DONE BY QUALIFIED TECHNICIANS LEGAL NOTICE ABOUT MUSIC SERVICES Various music services are supported in the NMP40. Depending whether your system is used in residential or commercial installations, make sure that the configured music service is legally authorized for your typical applications. E.g. Spotify is intended for use in residential systems while Soundtrack Your Brand is licensed for commercial usage.
- Page 7 CAUTION - SERVICING This product contains no user serviceable parts. Refer all servicing to qualified service personnel. Do not perform any servicing (unless you are qualified to do so.) EC DECLARATION OF CONFORMITY This product conforms to all the essential requirements and further relevant specifications described in following directives: 2014/30/ EU (EMC) and 2014/35/EU (LVD) WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)
-
Page 8: Connections And Connectors
Chapter 1 Connections and connectors CONNECTION STANDARDS The in- and output connections for AUDAC audio equipment are performed corresponding to international wiring standards for professional audio equipment. 3-Pin terminal block: For balanced output connections Left: Signal - (XLR Pin 3) - Page 9 Chapter 2 Overview NMP40 The NMP40 is a SourceCon™ compatible module featuring an (internal) board-edge connector which carries all signals for getting it connected to any supporting main unit. All external in & output connections shall be made using the available connectors on the panel.
-
Page 10: Module Screen
Chapter 3 Using the NMP40 Since the NMP40 is a SourceCon™ module, it can be combined with a variation of supporting main units. The operation and configuration interface might slightly vary depending of the unit where it is installed to, however offered functions will always be identical. - Page 11 Device name: The device name of the NMP40 for recognizing as a connect device in any Spotify supporting application can be adjusted. This allows a clear and intuitive user experience, especially when multiple devices are used in one network. The default device name is ‘AUDAC NMP40’...
-
Page 12: Troubleshooting
Other services (e.g. Spotify) doesn’t require any NTP sync and will play at all times. Nothing scheduled right now (Only SYB): When the NMP40 is connected with an active SYB account, but there is currently no music scheduled in the weekly scheduler. Firewall settings (Only SYB):... -
Page 13: Web Interface & Configuration
The fully adaptive structure guarantees a clear viewing on all different kinds of screen sizes. When application specific or total system control is required, the NMP40 can be integrated using the Audac Touch™ application. This application allows to custom configure your control panel (Dashboard) according to project or user specific requirements. - Page 14 Module screen The module screen of the web interface gives an overview of the currently playing music service, the track information and standard control functions (play, pause, previous, next, ...) are available depending the service which currently is being used. Above the status window is the device ID shown as ‘Now playing on #DeviceID’, while a volume bar below allows output volume adjustment.
-
Page 15: Settings Screen
Settings screen The settings screen includes all configurable settings which can be made to the NMP40. Depending of the configured streaming service, slightly different settings will be shown. The selected streaming service will be shown, together with the device ID / device name. - Page 16 IP settings: If IP settings for the NMP40 are set to DHCP, the IP address will be automatically assigned by the DHCP server in your network. It is not possible to configure the NMP40 to a fixed IP address Time server settings:...
- Page 17 Chapter 5 Installing the NMP40 CAUTION Before installing the NMP40 to any SourceCon™ compatible device, make sure the power is switched off. Malfunctions or electrical shocks may occur otherwise. Step 1: Make sure that the slot where the module should be installed is open and ready for installation.
- Page 18 Step 4: Some resistance might occur when the module’s board edge connector reaches the connection counterpart on the main board. Gently push the module all the way into the slot to ensure that the contacts are correctly inserted. The module is well inserted when its connection panel touches the metal chassis of the main device where inserted to.
- Page 19 Chapter 6 Additional information Technical specifications Connection SourceCon™ interface card slot Output Balanced stereo line output (2 x 3-pin Euro Terminal Block ~ 3.81 mm) Output level +7 dB ~ -91 dB (Software configurable) Signal/noise 100 dB THD+N < 0.02% Frequency response 20 Hz - 20 kHz Crosstalk...
- Page 20 Notes...
Need help?
Do you have a question about the NMP40 and is the answer not in the manual?
Questions and answers