Advanced Configuration (Advanced Users Only) - Cisco WRT610N - Simultaneous Dual-N Band Wireless Router User Manual

Appendix B
5. From the Drive drop-down menu, select an available
drive letter.
Select Drive Letter
6. Click Finish.
Access Mapped Drive
1. On your desktop, double-click the My Computer icon.
My Computer Icon
NOTE:
If the My Computer icon is not
displayed, then go to Start > All Programs >
Accessories > Windows Explorer.
2. In the Network Drives section, double-click the mapped
drive to access it.
Double-Click Mapped Drive
Simultaneous Dual-Band Wireless-N Gigabit Router
How to Install and Access USB Storage
Advanced Configuration (Advanced
Users Only)
To manage access to the USB storage device, you can
create shared folders, user groups, and user accounts.
Access the Browser-Based Utility
To access the browser-based utility, launch the web
browser on your computer, and enter the Router's default
IP address, 192.168.1.1, in the Address field. Then press
Enter.
A login screen will appear. (Non-Windows XP users will
see a similar screen.) Leave the User name field blank.
The first time you open the Web-based utility, use the
default password admin. (You can set a new password
on the Administration > Management screen. Refer to
Administration > Management, page 30.) Click OK to
continue.
Login Screen
Create a Shared Folder
1. Click the Storage tab.
2. Click the Disk tab.
Storage > Disk
40