Factory Settings - NETGEAR DGN1000-100NAS User Manual

N150 Wireless ADSL2+ Modem Router DGN1000 User Manual

Factory Settings

You can return the wireless modem router to its factory settings. On the bottom of the
wireless modem router, use the end of a paper clip or some other similar object to press and
hold the Restore Factory Settings button
router resets, and returns to the factory settings. Your device will return to the factory
configuration settings shown in the following table.
Table 7. Factory Settings Description
Feature
Router Login
User Login URL
User Name (case-sensitive)
Login Password (case-sensitive)
Internet Connection
WAN MAC Address
WAN MTU Size
Port Speed
Local Network (LAN)
Lan IP
Subnet Mask
RIP Direction
RIP Version
RIP Authentication
DHCP Server
DHCP Starting IP Address
DHCP Ending IP Address
DMZ
Time Zone
Time Zone Adjusted for Daylight Saving
Time
SNMP
for at least 7 seconds. The wireless modem
Default Behavior
http://www.routerlogin.net or http://www.routerlogin.com
admin
password
Use default address
1492
AutoSense
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Disabled
GMT
Disabled
Disabled
Appendix A. Supplemental Information | 95