Subscribe to Our Youtube Channel
Related Manuals for AcSiP EK-AI6108L S Series
Summary of Contents for AcSiP EK-AI6108L S Series
- Page 1 EK-AI6108LT-S User Guide AcSiP Technology Corp. www.acsip.com.tw Doc No : 912-17003 Ver. : A AcSiP Technology Corp www.acsip.com.tw Date: 2024/02/16...
-
Page 2: Functional Description
Functional Description USB Type-C Connector (DC Power in) DC-DC 3.3V Regulator Nucleo / Arduino Nucleo / Arduino Connections Connections (CN7,CN10) (CN8,CN9) GPIOs AI6108Lx Module SMA Connector AcSiP Technology Corp www.acsip.com.tw... - Page 3 DC Power Jumper Jumper Settings vs Schematic Ensure that jumper H11 on the EK-AI6108Lx-S is not fitted. See above photos for correct jumper settings. AcSiP Technology Corp www.acsip.com.tw...
- Page 4 SDIO_CLK SPI_SCK Pins Legend： GPIO10 SDIO_D3 SDIO_D3 SPI_CS GPIO9 GPIO8 Module Pin Name SDIO_D2 SDIO_D2 VDDIO POWER SDIO_D1 SDIO_D1 SPI_INT SDIO_D0 SDIO_D0 SPI_MISO SDIO Interface Pins SPI Interface Pins Control Pins *Serial Pins *Pending software support AcSiP Technology Corp www.acsip.com.tw...
- Page 5 USB port is not able to supply sufficient power. Note that if power is supplied via the USB-C connector then JP6 on the Nucleo must be removed. The Nucleo must still be connected to the PC via micro-USB connector CN1 in order to use the debug interface. AcSiP Technology Corp www.acsip.com.tw...
- Page 6 USB port is not able to supply sufficient power. Note that if power is supplied via the USB-C connector then JP1 on the Nucleo must be removed. The Nucleo must still be connected to the PC via micro-USB connector CN15 in order to use the debug interface. AcSiP Technology Corp www.acsip.com.tw...
- Page 7 USB port is not able to supply sufficient power. Note that if power is supplied via the USB-C connector then JP3 on the Nucleo must be removed. The Nucleo must still be connected to the PC via micro-USB connector CN1 in order to use the debug interface. AcSiP Technology Corp www.acsip.com.tw...
- Page 8 RPi 4 Pins Legend： USB-C Power Module Pin Name SDIO_D3 SDIO_D3 SPI_CS POWER SDIO_D2 SDIO_D2 RPi Pin Name SDIO_D1 SDIO_D1 SPI_INT POWER SDIO Interface Pins SDIO_D0 SDIO_D0 SPI_MISO SPI Interface Pins SDIO Pins Control Pins Control Pins AcSiP Technology Corp www.acsip.com.tw...
-
Page 9: Antenna Specifications
Antenna Specifications AcSiP Technology Corp www.acsip.com.tw...
Need help?
Do you have a question about the EK-AI6108L S Series and is the answer not in the manual?
Questions and answers