(IoT) devices with smart connection and cloud application/services. AI7697H is a highly integrated SIP module which features an application processor, a low power 1x1 11n singlw-band Wi-Fi subsystem, a Bluetooth subsystem, and a Power Management Unit. The application processor subsystem contains an ARM Cortex-M4F MCU, which has many peripherals, including UART, I2C, SPI, I2S, PWM, IrDA, and auxiliary ADC.
If everything is correct, similar messages will be shown in the console to notify your HDK has received an IP address. ************************ DHCP got IP:10.10.10.101 ************************ PING from the LinkIt 7697 HDK (SDK v3.1.0) Product Name AI7697H MT7697 IoT SiP Module Version Date FEB 21,2017 Page 6 of 9...
Page 8
[RANDOM] ff-76-f0-01-a4-1a [I][APP] Event Type: ADV_IND [I][APP] Complete Name: WeLoop B08 DEF4D4 [I][APP] AD F lags: LE Limited Discoverable Mode [I][APP] RAW DATA=0x120957654c6f6f702042303820444546344434031934120201050303e7fe [I][APP] ======================================== @endcode Product Name AI7697H MT7697 IoT SiP Module Version Date FEB 21,2017 Page 7 of 9...
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop Product Name AI7697H MT7697 IoT SiP Module Version Date...
Page 10
20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: 2ADWC-AI7697H”. The grantee's FCC ID can be used only when all FCC compliance requirements are met.
Need help?
Do you have a question about the AI7697H and is the answer not in the manual?
Questions and answers