Lenovo ideacentre Y900 Re Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ideacentre Y900 Re
  6. Hardware maintenance manual
Lenovo ideacentre Y900 Re Hardware Maintenance Manual

Lenovo ideacentre Y900 Re Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ideacentre Y900 Re Hardware Maintenance
Manual
Machine Types: 90FK [Y900 RE-34ISZ / Energy Star]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ideacentre Y900 Re and is the answer not in the manual?

Questions and answers

Related Manuals for Lenovo ideacentre Y900 Re

Summary of Contents for Lenovo ideacentre Y900 Re

  • Page 1 Y900 Re Hardware Maintenance Manual Machine Types: 90FK [Y900 RE-34ISZ / Energy Star]...
  • Page 3 Y900 Re Hardware Maintenance Manual Machine Types: 90FK [Y900 RE-34ISZ / Energy Star]...
  • Page 4 First Edition (April 2016)22nd © Copyright Lenovo 2016. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925...

  • Page 5: Table Of Contents

    Selecting a startup device ..Replacing the CPU ... . . Exiting the Lenovo BIOS Setup Utility program . . Replacing the motherboard..
  • Page 6 Y900 Re Hardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    (iii) cause reductions in system performance; (iv) cause additional heat or other damage; and (v) affect system data integrity. Lenovo and Intel have not tested, and do not warranty, the operation of the processor beyond its specifications. Lenovo and Intel have not tested, and do not warranty, the operation of other system components beyond their industry standard specifications.
  • Page 8 Y900 Re Hardware Maintenance Manual...

  • Page 9: Chapter 2. Safety Information

    Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the computer covers, unless instructed otherwise in the installation and configuration procedures. © Copyright Lenovo 2016...
  • Page 10 – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.) • If an electrical accident occurs: – Use caution; do not become a victim yourself. – Switch off power. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 11: Safety Inspection Guide

    – Send another person to get medical aid. Safety inspection guide The intent of this inspection guide is to assist you in identifying potentially unsafe conditions on these products. Each machine, as it was designed and built, had required safety items installed to protect users and service personnel from injury.

  • Page 12: Grounding Requirements

    • Connect and disconnect cables as described in the following table when installing, moving, or opening covers on this product or attached devices. ideacentre Y900 Re Hardware Maintenance Manual...
  • Page 13 To Connect To Disconnect 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2. First, remove power cords from outlet. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power cords to outlet. 4.
  • Page 14 To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 15: Chapter 3. General Information

    This chapter provides general information that applies to all machine types supported by this publication. Specifications This section lists the physical specifications for your computer. This section lists the physical specifications for your computer. Type ideacentre Y900 Re This section lists the physical specifications. Environment Air temperature: Operating: 10°...
  • Page 16 Y900 Re Hardware Maintenance Manual...

  • Page 17: Chapter 4. General Checkout

    • If the computer displays a POST error, go to “POST error codes”. • If the computer hangs and no error is displayed, continue at step 7. 7. If the test stops and you cannot continue, replace the last device tested. © Copyright Lenovo 2016...
  • Page 18 Y900 Re Hardware Maintenance Manual...

  • Page 19: Chapter 5. Using The Setup Utility

    1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer. 2. Press and hold the F1 key then turn on the computer. When the Lenovo BIOS Setup Utility program is displayed, release the F1 key.
  • Page 20 5. Select Save changes and Exit from the menu. Power-On Password When a Power-On Password is set, you cannot start the Lenovo BIOS Setup Utility program until a valid password is typed from the keyboard. Setting, changing, or deleting a Power-On Password Note: A password can be any combination of letters and numbers up to 16 character (a-z, and 0-9).

  • Page 21: Enabling Or Disabling A Device

    To set a Power-On Password, do the following: 1. Start the Lenovo BIOS Setup Utility program (See ”Starting the Lenovo BIOS Setup Utility program” on page 13.) 2. From the Security menu, select Set Power-On Password and press the Enter key.

  • Page 22: Selecting A Startup Device

    Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Lenovo BIOS Setup Utility program (see “Starting the Lenovo BIOS Setup Utility program” on page 13). 2. From the Lenovo BIOS Setup Utility program main menu, select the Startup option.

  • Page 23: Exiting The Lenovo Bios Setup Utility Program

    Exiting the Lenovo BIOS Setup Utility program After you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utility program main menu. You might have to press the Esc key several times. Do one of the following: •...
  • Page 24 Y900 Re Hardware Maintenance Manual...

  • Page 25: Chapter 6. Symptom-To-Fru Index

    • System Board Power Supply connectors • Microprocessor(s) connection Check the power cord. Power Cord Check the power-on switch. Power-on Switch Additional Service Information This chapter provides additional information that the service representative might find helpful. © Copyright Lenovo 2016...

  • Page 26: Post Error Codes

    2. Remove or disconnect the following components (if connected or installed) one at a time. a. External devices (modem, printer, or mouse) b. Extended video memory c. External Cache d. External Cache RAM e. Hard disk drive f. Disk drive ideacentre Y900 Re Hardware Maintenance Manual...
  • Page 27 3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or component. If all devices and components have been removed and the problem continues, replace the system board. Chapter 6 Symptom-to-FRU Index...
  • Page 28 Y900 Re Hardware Maintenance Manual...

  • Page 29: Chapter 7. Locations

    The system board (also known as the “mainboard” or “motherboard”) is the main circuit board in your computer. It provides basic computer functions and supports a variety of devices that are factory-installed or that you can install later. The following illustrations show the locations of the different parts on the system board. © Copyright Lenovo 2016...
  • Page 30 Front LED header LPC debug Power connector Mini PCI-E slot Front USB 3.0 slot PCI express X 1 adapter slots (5) Aux fan 1 PCI express X 16 adapter slot SATA connectors (4) System fan header ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 31: Chapter 8. Replacing Hardware

    Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug all power and signal cables from the computer. 3. Place the system on a flat, stable surface. © Copyright Lenovo 2016...

  • Page 32: Cleaning Rear Dust Screen

    To replace the keyboard: Step 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the computer, and turn off all attached devices. Step 2. Unplug all power cords from electrical outlets. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 33: Removing The Computer Cover

    Step 3. Locate the connector for the keyboard. Refer to “Front view of the chassis” and “Rear view of the chassis”. Step 4. Disconnect the defective keyboard cable from the computer and connect the new keyboard cable to the same connector. Step 5.

  • Page 34: Removing The Front Bezel

    Step 4. Remove the computer cover. Refer to “Removing the computer cover”. Step 5. Remove the computer cover. Refer to “Removing computer cover”. Step 6. Remove the front bezel. Refer to “Removing the front bezel”. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 35: Replacing A Memory Module

    Step 7. Pull the out the front dust screen as shown. Step 8. Cleaning tips: Us a brush gently brush through the dust screen to remove the dust. If cleaning the dust screen with clean water, make sure you dry the dust screen completely before put it back.

  • Page 36: Replacing A Hard Disk Drive

    Line up the new hard disk drive with the plastic bracket and snap it into position. Step 5. Slide the new hard disk drive into the drive bay and slide the drive bay into place. Step 6. Connect the power and signal cables to the new hard disk drive. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 37: Replacing An Optical Drive

    Step 7. Reattach the computer cover. Replacing an optical drive Note: For this procedure, it helps to lay the computer flat,stable surface. To replace an optical drive: Step 1. Remove the computer cover. Refer to “Removing the computer cover”. Step 2. Remove the front bezel.

  • Page 38: Replacing The Rear System Fan

    “Rear view” for help with locating the various connectors. Step 4. Remove the computer cover. Refer to “Removing the computer cover”. Step 5. Disconnect the fan power cable from the connector on the motherboard. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 39: Replacing The Power Supply

    Step 6. The system fan is locked to the computer case via plastic screw, use a knife cut off the plastic locking screws, then pull the rear system fan assembly out of computer case. Step 7. To install the new system fan: Line up the new system fan with the computer case and secure it to the computer case with locking screws by pulling the plastic screws through the locking hole.

  • Page 40: Replacing The Wi-Fi Card

    Remove the computer cover. Refer to “Removing the computer cover”. Step 5. Disconnect the 2 antenna cables from the Wi-Fi card. Step 6. Remove the 2 screws that secure the Wi-Fi card to the motherboard. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 41: Removing The Top Cover

    Step 7. Pull the Wi-Fi card upward to remove it from the card port. Step 8. Install the new Wi-Fi card: Line up the new Wi-Fi card, then insert it into the same card port. Secure the Wi-Fi card to the motherboard with the screw. Connect the 2 antenna cables to the new Wi-Fi card.
  • Page 42 Put the computer up side down, locate the top cover locking fin as shown. Use a flat head screw drivers to pry up the locking fin to release the top cover. Step 6. Slide the top cover outward to remove the top cover as shown. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 43: Replacing A Graphics Card

    Step 7. Reinstall the computer cover: Align the cover with the guide track on the computer case, then slide the cover in. Push the cover till it’s locking position. Press down the locking fin to secure the top cover. Step 8. Reattach the computer cover.
  • Page 44 Push the locking pin that locks the graphic card to the motherboard, then lift the card straight up to remove it. Step 7. To install the new graphics card: Attach the new graphics card to the same adapter connector. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 45: Replacing The Cpu

    Connect the power cables to the new graphics card. Turn the graphics card latch to the closed position and secure it with the locking pin. Step 8. Reattach the computer cover. Replacing the CPU Note: For this procedure, it helps to lay the computer flat. To replace the CPU: Step 1.
  • Page 46 Attention: Do not touch the gold contacts on the bottom of the microprocessor. When handing the microprocessor, touch only the sides. Note: Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 47: Replacing The Motherboard

    Step 8. Holding the sides of the microprocessor with your fingers, remove the protective cover that protects the gold contacts on the new microprocessor. Step 9. Holding the sides of the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket.
  • Page 48 Reattach the memory module, Wi-Fi card, CPU, and the heat-sink to the new motherboard. Connect the all cables to the new motherboard. Attach the graphic card to the new motherboard. Step 15. Reattach the computer cover. ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 49: Fru Lists

    FRU lists This chapter lists the information on the field replaceable units (FRUs). Attention: Be sure to read and understand all the safety information before replacing any FRUs. ideacentre Y900 RE-34ISZ Service Parts Listing MT: 90FK FruP/N Description BDPLANAR 00XK059...
  • Page 50 00XL049 Fru, LINECORD,IT,1.8M,3P,NON-LH 00XL048 Fru, LINECORD,IT,1.8M,3P,NON-LH 00XL029 Fru, LINECORD,CH,1.8M,3P,NON-LH 00XL028 Fru, LINECORD,IL,1.8M,3P,NON-LH 00XL040 Fru, LINECORD,ZA,1.8M,3P,NON-LH 00XL041 Fru, LINECORD,AU,1.8M,3P,NON-LH 00XL044 Fru, LINECORD,DK,1.8M,3P,NON-LH 00XL030 Fru, LINECORD,CH,1.8M,3P,NON-LH 00XL047 Fru, LINECORD,IT,1.8M,3P,NON-LH 00XL014 Fru, EU/KR,1.8M,3P,NON-LH 00XL027 Fru, LINECORD,IL,1.8M,3P,NON-LH MECH_ASM ideacentre Y900 Re Hardware Maintenance Manual...
  • Page 51 01EF273 Top Bezel Base,Y900RE 01EF274 34L,L cover ass'y,Y900RE 00XD542 34L,Bottom Dust filter ,Destiny 01EF276 34L,Front IO ,Y900RE 01EF275 34L,R cover ,Y900RE 01EF272 Top Bezel Cover,Y900RE 01EF277 34L,Chassis ,Y900RE 01EF271 Front Bezel,Y900RE 00XD539 34L,Top Handle,Destiny 00XD541 34L,Front Dust filter ,Destiny 00XD540 34L,Front Fan Bkt,Destiny 00XD545 34L,HDD Try ,Destiny...
  • Page 52 Razer Mamba Mouse 01FJ019 Razer BlackWidow Chroma K/B 01FJ026 Razer BlackWidow Chroma K/B 01FJ017 Razer BlackWidow Chroma K/B 01FJ020 Razer BlackWidow Chroma K/B 01FJ016 Razer BlackWidow Chroma K/B WIRELESS 00JT471 Wireless,CMB,LTN,NFA344 V2 00JT480 Wireless,CMB,IN,8260 ac NV ideacentre Y900 Re Hardware Maintenance Manual...

  • Page 53: Chapter 9. General Information

    • Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event , a daily event or a weekly event. • Wake Up on LAN: This feature allows LAN adapter card to wake the System. © Copyright Lenovo 2016...

This manual is also suitable for:

Ideacentre y900 re-34isz90fk

Table of Contents