Table of Contents
Advertisement
Quick Links
Manual Version: 1.2
Date of Issue: 2012-04
We reserve the right to make changes in the course of technical development without previous notice.
© 2012 Siemens Healthcare Diagnostics Products GmbH. All rights reserved.
Emil-von-Behring-Str. 76
35041 Marburg
Germany
Neither this manual nor any parts of it may be duplicated or transmitted in any way without the written approval
of Siemens Healthcare Diagnostics Products GmbH.
10712637
BN ProSpec
Addendum to the
Instruction Manual
– Instructions for Use –
®
System
Advertisement
Table of Contents
Related Manuals for Siemens Healthcare BN ProSpec
Summary of Contents for Siemens Healthcare BN ProSpec
- Page 1 – Instructions for Use – Manual Version: 1.2 Date of Issue: 2012-04 We reserve the right to make changes in the course of technical development without previous notice. © 2012 Siemens Healthcare Diagnostics Products GmbH. All rights reserved. Emil-von-Behring-Str. 76 35041 Marburg Germany Neither this manual nor any parts of it may be duplicated or transmitted in any way without the written approval of Siemens Healthcare Diagnostics Products GmbH.
- Page 2 Name change 2012-04 Update Trademarks BN ProSpec is a trademark of Siemens Healthcare Diagnostics. Software Copyrights Software of Siemens Healthcare Diagnostics Products GmbH is the copyright property of Siemens. All rights to this software are retained by Siemens. You are entitled to use this software as well as the printed documentation relating to it on one single, non-transferable workstation.
-
Page 3: Table Of Contents
Storage, transport, setup and service Safety notes Technical data Electromagnetic compatibility, interference suppression and immunity to interference Meaning of symbols on the labels of consumables Yearly Maintenance Procedures 10 Maintenance log ® BN ProSpec System – Addendum to the Instruction Manual – Version 1.2... - Page 4 Table of contents ® BN ProSpec System – Addendum to the Instruction Manual – Version 1.2...
-
Page 5: Introduction
1 Introduction Introduction This document represents an addendum to the BN ProSpec System Instruction Manual, Version 1.4. The information, notes and warnings contained in this addendum represent the current status and supersede any other information, notes and warnings contained in the instruction manual. -
Page 6: Storage, Transport, Setup And Service
WARNING All of the instrument’s on-board safety mechanisms may be ineffective if the instrument is used in a manner other than that defined by the manufacturer. ® BN ProSpec System – Addendum to the Instruction Manual – Version 1.2... -
Page 7: Technical Data
The space required for ventilation on the rear of the instrument of at least 10 cm must be ensured. Sound pressure level 55 dB(A) Measured value at operator’s position. ® BN ProSpec System – Addendum to the Instruction Manual – Version 1.2... -
Page 8: Electromagnetic Compatibility, Interference Suppression And Immunity To Interference
The labels of consumable materials are marked with various symbols. The meaning of additional symbols is shown below: Symbol Meaning Cuvettes Evaporation caps Diluent Buffer Predilution wells Table 1 Meaning of symbols on the labels of consumables ® BN ProSpec System – Addendum to the Instruction Manual – Version 1.2... -
Page 9: Yearly Maintenance Procedures
Replace the container tubing as described in the instruction manual, Chapter 12.6 Replacing the Tubing. Record the maintenance Record every maintenance procedure that has been carried out in the procedures maintenance log, see Chapter 10. ® BN ProSpec System – Addendum to the Instruction Manual – Version 1.2... -
Page 10: Maintenance Log
BN ProSpec System maintenance log form from Day/month/year Day/month/year Weekly maintenance procedures Week 1 Week 2 Week 3 Week 4 Week 5 1. Probe operation checked 2. Probe cleaned externally 3. Surface of wet station and rhombus of dispensing area checked 4.
Need help?
Do you have a question about the BN ProSpec and is the answer not in the manual?
Questions and answers