Advertisement
Quick Links
C02 Sensor (MBS-K30)
User Manual
MBS-K30
for Carbon-X CO2 Alarm System
OVERVIEW
Thank you for purchasing our MBS-K30 CO2 sensor.
The MBS-K30 CO2 sensor is specially designed to be used with the Carbon-X system to measure the CO2
PPM within the growing area. lt can read up to 30,000 ppm CO2 is critical to the proper operation and safety
of an emergency CO2 system (Carbon-X).
It incorporates an NDlR 0-30,000 ppm sensor in a self-aspirated enclosure.
It can be used in combination with one or more DSC-1 CO2 device modules to measure CO2 level within the
area, then connect and control the user's supplemental CO2 system using the Hydro-X control system. The
built-in LCD display will constantly display the current CO2 level (ppm). Each zone/room monitored by the
Carbon-X can have 1 or 2 MBS-K30 CO2 sensors installed to satisfy local code requirements.
01
Advertisement
Related Manuals for TrolMaster MBS-K30
Summary of Contents for TrolMaster MBS-K30
- Page 1 Thank you for purchasing our MBS-K30 CO2 sensor. The MBS-K30 CO2 sensor is specially designed to be used with the Carbon-X system to measure the CO2 PPM within the growing area. lt can read up to 30,000 ppm CO2 is critical to the proper operation and safety of an emergency CO2 system (Carbon-X).
- Page 2 1 x T-Shape Splitter CONNECTION Use an RJ12 cable to connect the MBS-K30 to the SPH-1 splitter hub for supplemental power, then connect the splitter hub to the main controller using an RJ-12 cable. The MBS-K30 should be connected to the...
- Page 3 Opening the controller will void the warranty. If the surface of MBS-K30 Dry Contact Board is dirty, wipe it with a dry towel. The MBS-K30 Dry Contact Board operates under natural ventilation conditions.
Need help?
Do you have a question about the MBS-K30 and is the answer not in the manual?
Questions and answers