TrolMaster MBS-GH User Manual

Replacement 4-in-1 sensor for green-x controller

Download this manual

for Green-X Controller (MBS-GH)

OVERVIEW

Thank you for choosing the MBS-GH Sensor. This sensor is designed to measure CO2, temperature, humidity,

and illuminance in greenhouse environments. Designed for Green-X Greenhouse controller (GCS-1). It

integrates a high-precision CO2 sensor (±3% accuracy), SHT31 temperature/humidity sensor, NTC

temperature sensor (±0.5°C accuracy), and light sensing. With RS485 signal output, it ensures stable and

accurate data transmission over long distances. This manual provides instructions for installation, operation,

and maintenance of the MBS-GH sensor.

The MBS-GH is suitable for various automated environmental control systems, ensuring precise monitoring

to optimize growth conditions in greenhouses and other agricultural applications.

PACKAGE CONTENTS

1x Replacement 4-in-1 Sensor for Green-X Controller (MBS-GH)

●

1x 4ft RJ Cable

●

1x T-Shape Splitter

●

Replacement 4-in-1 Sensor

User Manual

Need help?

Do you have a question about the MBS-GH and is the answer not in the manual?

Page 1 User Manual OVERVIEW Thank you for choosing the MBS-GH Sensor. This sensor is designed to measure CO2, temperature, humidity, and illuminance in greenhouse environments. Designed for Green-X Greenhouse controller (GCS-1). It integrates a high-precision CO2 sensor (±3% accuracy), SHT31 temperature/humidity sensor, NTC temperature sensor (±0.5°C accuracy), and light sensing.
Page 2 Attach the RJ12 Connector Cable to the controller’s sensor port, or attach to RJ12 Splitter Hub with cable (SPH-1), ● then attach SPH-1 into GCS-1 controller. Confirm the connections are tightly secured to prevent data loss or interference. ● Let the MBS-GH hang naturally after connecting ●...
Page 3 This interface indicates greenhouse and outdoor status, Left side indicates greenhouse status and right side indicates outdoor status. Greenhouse Status Temperature Humidity CO2 Concentration Day / Night Status Once installed, the MBS-GH sensor will automatically measure CO2 concentration, temperature, humidity. ● Measurement Ranges: CO2 Concentration: Accurate within ±70ppm±3%. ● Temperature: 0-50°C, accuracy ±0.5°C. ●...
Page 4 Opening the controller will void the warranty. lf the surface of MBS-GH is dirty, wipe it with a dry towel. The MBS-GH operates under natural ventilation conditions.