Usb Flash Disk Utility Program - Corsair FLASH VOYAGER Manual

Hi-Speed USB Portable Flash Disk User's Manual Guide

USB Flash Disk Utility Program

This section provides you with information on how to run the USB Flash Disk
Utility program. The Utility program allows you to set a private security password
as well as providing access to disk format and partition functions.
Installing the USB Flash Disk Utility
Follow the steps below to install the USB Flash Disk Utility program:
1. Run the Setup program included on your Corsair Flash Voyager USB 2.0 Flash
Drive utility CD. If you using Windows 98, do this installation before plugging
in the device.
2. The InstallShield Wizard will start and will prompt you to start installing the
USB Flash Disk Utility. Click Next to continue.
3. If there is a License Agreement (EULA) window appearing, you are required to
read and accept it before the installation can proceed. InstallShield Wizard will
then start to install and copy the needed files and programs to your computer.
Click the Finish button when InstallShield Wizard prompts you that the
installation is complete.
4. When installation is complete, check if there is a program shortcut created on
your desktop screen for the USB Flash Disk Utility program.
Page 7