Subscribe to Our Youtube Channel
Related Manuals for Corsair Obsidian 800D Hot Swap Trays
Summary of Contents for Corsair Obsidian 800D Hot Swap Trays
- Page 1 D r i v e M o u n t i n g i n 8 0 0 D H o t S w a p T r a y s Mounting Standard Hard Drives and Solid State Drives into Corsair Obsidian 800D Hot Swap Trays Version 1.0 February, 2010...
- Page 2 Obsidian 800D Hot Swap Trays Hot Swap Tray Overview The Corsair Obsidian 800D case features a 4-drive SATA hot-swap bay. Each slot has a removable tray which holds 1 drive. These trays can accommodate either standard 3.5” hard drives (HDs) or 2.5” solid state drives (SSDs).
- Page 3 Obsidian 800D Hot Swap Trays Mounting an SSD SSDs require only 2 screws to mount as seen here circled in red. Note that the SATA power and data con- nectors must be mounted away from the tray handle.
- Page 4 Obsidian 800D Hot Swap Trays SSD Mounted Note the offset of the SSD. This offset insures proper alignment with the connector mounted into the hot swap back plane.
- Page 5 Obsidian 800D Hot Swap Trays Mounting a Hard Drive Hard drives use the holes on each side of the drive. Place screws into each of the 3 holes on each side of the drive for the most secure mounting. Note...
- Page 6 Obsidian 800D Hot Swap Trays The Drives Mounted The drive trays conform to the SATA standard for physical dimensions. When properly mounted, the drives are correctly oriented to be inserted into the hot-swap drive bay. This enables fast and easy drive swapping.
- Page 7 More information on Corsair solid state drives can be found here: http://www.corsair.com/products/ssd_home.aspx © February, 2010, Corsair Memory, Incorporated. All rights reserved. All trademarks and registered trade- marks are the property of their respective owners in the United States and/or other countries.
Need help?
Do you have a question about the Obsidian 800D Hot Swap Trays and is the answer not in the manual?
Questions and answers