Related Manuals for anko HM-710
Summary of Contents for anko HM-710
- Page 1 Bullet Blender HM-710 User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using any electrical product, always follow these basic safety precautions: READ ALL INSTRUCTIONS BEFORE USE WARNING: 1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come in contact with water or any other liquid. 2. - Page 3 13. DO NOT attempt to sharpen blades. 14. DO NOT use the appliance if blade assembly is bent or damaged. 15. To reduce risk of injury, never place the blade assembly on the base without the proper attachment. 16. DO NOT operate this appliance on or near any hot surface (such as gas or electric burner or in a heated oven).
- Page 4 31. For safe operation of the product, always ensure the product assembled correctly before use. 32. Make sure the blade is securely fastened before assembling onto the motor unit. 33. Do not attempt to repair or disassemble the appliance. There are no user-serviceable parts inside the appliance.
-
Page 5: Before First Use
SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY KNOW YOUR BULLET BLENDER 1. Motor base 2. Blade assembly 3. Blender Cup 4. Lid 5. Lip ring IMPORTANT! Please make sure that your appliance is received with all the components shown above. Check everything carefully before use. - Page 6 2. Clean the motor base with a damp cloth or sponge. Wipe dry with a soft dry cloth. CAUTION: Never immerse the motor base in water or other liquids. Never use abrasive cleaners on any part of the product. Do not place any parts into a dishwasher or extremely hot water. IMPORTANT! To prevent leaking, Do Not remove the sealing gasket from the blade assembly.
-
Page 7: Troubleshooting
NOTE: The blender has a built-in safety lock feature, this ensures that you can only switch ON the appliance while the blender cup and the blade assembly are assembled on the motor base securely. IMPORTANT: On the blade base collar, there is a silicone gasket seal that creates an airtight fit with the blender cup to prevent liquid from leaking. -
Page 8: Cleaning And Storage
Blade assembly will not properly Set the blender cup on a level surface. Place the blade align to the cup assembly on top of the blender cup and align the threads so that the blade sit flat on the cup. Twist clockwise so that the blade is aligned to the cup until you have a tight seal. - Page 9 12 Month Warranty Thank you for your purchase. Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the HM-710 and is the answer not in the manual?
Questions and answers