Conquer CQL1574-TWS Instruction Manual

Instruction Manual (Read before proceeding)
Power:
 Works on internal rechargeable Lithium battery. Please charge your
speaker fully before first use. To charge the battery :
Insert the 2 small connectors of the supplied charging cable into the USB
charging ports on the back of speakers
Insert the single large connector into the USB port on a computer for
charging.

A red light aside will indicate the charging situation. When battery is full,
the red light will turn off automatically.
To Use as a TWS
 Turn on both units by sliding the switches on the back to "ON", a tone will
be heard and the Bluetooth LED indicator the blue indicator lights flash
quickly and start pairing.
 After around 5 seconds, A tone will be heard from them to indicator the two
units connect with each other automatically. One of the Bluetooth LED
indicator flash slowly, this is the second speaker. The Bluetooth LED
indicator on the other speaker will continue to quickly flash Blue. This is the
main speaker.

Search the Bluetooth speaker device name "BSSK9020" on your mobile
phone, connect it via the option menu of your mobile device, pairing mode
is 0000 if any is required.

A tone will prompt out from main speaker when twin speakers connected
with your device via Bluetooth. At the same time, Blue light in main unit will
turn solid blue.

Start playing music on your device. Keep the speakers within 16fts of each
other. And keep your device within 30ft from main speaker.
 Adjust the volume of your device to a comfortable level. Then enjoy your
music from both speakers.
 If the second unit turns off while playing music, the main speaker will
continue to playing the music.

If the main unit turns off while playing music, the second unit will stop
playing music at the same time.
Turn on main speaker or second speaker again in both situations above, the
speakers will search and connected with each automatically. Tones will be
heard from both units to indictor they are paired with each other successfully.
And they will play music at the same time after that. The process takes about
5-10 seconds
CQL1574-TWS Bluetooth Speaker