Conquer CQL1556-B Instruction Manual

Power:
Please charge your Bluetooth speaker fully before its first use.
To charge the battery:
Using a Micro to 3.5MM‐USB Charging Cable (included), insert the USB power cable into the
micro USB port located on the back of the speaker. Connect the other end of the USB cord
into a powered USB source such as a computer, laptop or USB AC adapter.
When your Bluetooth speaker is charging, the indicator light will turn red.
Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to 'ON' position.
The blue indicator light will flash quickly. This indicates that the speaker is in pairing mode
and is searching for your Bluetooth device.
Make sure the Bluetooth function on your device is turned on.
Search the speaker named," CQL1556‐B".
Once you have selected the speaker, your device will pair without a password. (If your device
prompts for a password, enter the password"0000".
Once your speaker is paired, the blue indicator light will begin to flash slower.
Start playing music on your device. Make sure that you keep your device within a 33 feet
range of your Bluetooth speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Using as a Wired Device
For other music devices without Bluetooth, use the attached Micro to 3.5MM‐USB Charging
Cable. Insert the 3.5 mm jacks into the earphone jack on your device and attach the micro
USB end to the micro USB port on the back of the speaker.
Turn on the unit and start playing music.
Turn off the unit when not in used.
Light Operation
When turn on the unit, the light will light up automatically.
Press the light mode button, and you can change the light mode as you need.
6 light dancing modes for your choice
Turn off the unit or press the light mode button, the light will turn off accordingly.
CQL1556-B
Instruction Manual (Read before proceeding)
Bluetooth Speaker