Conquer CQL1586-B Instruction Manual

CQL1586-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use.
To charge the battery :
Using a Micro USB cable (included), insert the jack into "Charging" jack located on the bottom of the unit and
then plug the USB connector into the USB port on a computer for charging.
A red light will indicate the charging situation. When battery is full, the red light will turn off automatically.
Playing Music via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back of the speaker to 'ON' position.
The blue indicator light will flash quickly. This indicates that the speaker is in pairing mode and is searching for your
Bluetooth device.
Make sure the Bluetooth function on your device is turned on.
Search the speaker named," SB‐01".
Once you have selected the speaker, your device will pair without a password. (If your device prompts for a password,
enter the password"0000".)
Once your speaker is paired, the blue indicator light will begin to flash slowly.
Start playing music on your device. Make sure that you keep your device within a 33 feet range of your Bluetooth
speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Disco Light Operation
Disco light keeps on once you turn on the speaker.
Disco colorful light will either work independently or dance to the rhythm of the music.
Caution:
This is not a toy. Please keep away from small children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not over charge the battery.
Battery pack shall not be exposed to excessive heat such as sunshine, fire or the like