Setting Precautions - FUTABA GY501 Instruction Manual

F S
OR AFETY
7

Setting Precautions

Connector Connection
Insert the connectors fully and firmly.
If vibration, etc. causes a connector to work loose during flight, the
heli may crash.
Precautions When Turning on the Power Switch
During initialization, the message **INIT* appears on the GY501
LCD screen.
Do not move the helicopter until this message disappears (in
about 5 seconds).
Also, do not move the transmitter rudder stick from the neutral
position during this period.
Sensor Mounting
Always use the attached sensor tape to mount the gyro sensor.
Always reinstall the sensor tape if it has started to separate or tear.
Do not get fuel, waste oil, etc. on the gyro sensor.
The special paint may dissolve.