Subscribe to Our Youtube Channel
Related Manuals for Draper 24183
Summary of Contents for Draper 24183
- Page 1 Original Instructions Version 1 - December 2024 230V 1050W ELECTRIC TILLER 24183...
-
Page 2: Product Reference
All photographs and drawings within this manual are document is part of the product; retain it for the life supplied by Draper Tools to help illustrate correct of the product, passing it on to subsequent holders. operation of the product. -
Page 3: Table Of Contents
2. Contents 1. Preface 1.1 Product Reference 1.2 Revisions 1.3 Understanding the Safety Content of This Manual 1.4 Copyright © Notice 2. Contents 3. Product Introduction 3.1 Intended Use 3.2 Specification 4. Health and Safety Information 4.1 General Health and Safety Precautions 4.2 Connection to the Power Supply 4.3 Residual Risk 5. -
Page 4: Product Introduction
Ideal for use in small gardens, allotments and flower beds. Any other application beyond the conditions established for use will be considered misuse. Draper Tools accepts no responsibility for improper use of this product. 3.2 Specification Stock No. -
Page 5: Health And Safety Information
4. Health and Safety Information Important: Read all the Health and Safety instructions the cord away from heat, oil, sharp edges and moving before attempting to operate, maintain or repair this parts. Damaged or entangled cords increase the risk product. Failure to follow these instructions may result in of electric shock. -
Page 6: Connection To The Power Supply
• This appliance is supplied with an approved plug and cord for your safety. • If the power supply cord is damaged, it must be replaced by Draper Tools, an authorised service agent or similarly qualified personnel in order to avoid a hazard. -
Page 7: Identification And Unpacking
5. Identification and Unpacking 5.1 Product Overview (13) (10) (11) (12) Motor housing 2 X Middle handle sections 2 x cord clips 4 X Handle bolts Lock button (10) Lower handle ON/OFF trigger (11) Protection guards Right handle grip with ON/OFF control (12) 4 X Rotor blades Frame (13) Power cord and plug... -
Page 8: What's In The Box
If any part is damaged or missing, do not attempt to examine it for any signs of damage that may have occurred use the product. Please contact the Draper Helpline; during shipment. Before assembling the product, lay the contact details can be found at the back of this manual. -
Page 9: Assembly Instructions
6. Assembly Instructions Important: Before preparing or adjusting this product, read and understand all the safety instructions listed in this manual. 6.1 Fitting the Frame (Fig.1) (14) 1. Slide the right (5) and left (7) handle bars into the frame (6). • Ensure that the cord holder is positioned on the same side as the control handle (5). -
Page 10: Operating Instructions
7. Operating Instructions Important: Before operating this product, read and understand all the safety instructions listed in this manual. Ensure that the product is fully assembled and correctly prepared for use. 7.1 ON/OFF Switch Operation (Fig. 5) Note: For your safety, this tiller is equipped with a double switch system. -
Page 11: Maintenance And Troubleshooting
8. Maintenance and Troubleshooting • Proper and regular maintenance of the product will 1. Unscrew the hex bolt and the self-locking nut (A) on ensure a longer lifespan and consistent performance. the blade pair (C). Failure to correctly maintain the product may result in 2. -
Page 12: Troubleshooting
Draper Tools Product Helpline for details of your nearest authorised agent. Draper Tools will endeavour to hold any spare parts, if applicable, for seven years from the date that it sells the final matching stock item. -
Page 13: Warranty
If, upon inspection, it is found that the fault occurring is due to defective materials or workmanship, repairs will Your Draper Tools guarantee is not effective until you can be carried out free of charge. This warranty period covers produce, upon request, a dated receipt or invoice to parts and labour for 24 months from the date of verify your purchase within the guarantee period. -
Page 14: Explanation Of Symbols
11. Explanation of Symbols Rotating parts may cause serious injury. Make sure the blades come to a complete Read the instruction manual. stop before transporting the machine or before inspecting, cleaning, or conducting any other maintenance. Warning! Beware of sharp blades. Blades continue to rotate after the motor is switched off. - Page 15 Notes – 15 –...
-
Page 16: Contact Details
Product Helpline: +44 (0) 23 8049 4344 Telephone Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Please contact the Draper Tools Product Helpline for repair and servicing enquiries. © Published by Draper Tools Limited © Published by Draper Tools Limited...
Need help?
Do you have a question about the 24183 and is the answer not in the manual?
Questions and answers