Page 1
Watt Stopper Inc. Drawn by: LEWIS PLM: SANTA CLARA, CALIFORNIA Project Engr: Title: WS-200 Installation Instructions MarComm Dir: Drawing #: Original Drwg. Date: 30 MAY 01 Rev #: Rev. Date: 18 OCT 01 TITLE BOX PG. Scale: 1 : 1...
Page 2
The Watt Stopper automatic wall switch fits behind industry standard dec- set when the lights would nor- • Adjust sensitivity counter-clockwise to reduce excessive sensitivity. orator style switch plates. The Watt Stopper has available both single and Fresnel Lens mally be turned off due to the double gang switch plates in most configurations.
Page 3
INSTALLATION WIRING DIRECTIONS The WS-200 Automatic Wall Switch turns lighting systems on and off The WS-200 will detect motion in areas up to 900 sq. ft. and up to 35 For normal installation on the WS-200, connect: CAUTION based on occupancy and light levels and is designed to replace the stan- feet from the sensor.
Need help?
Do you have a question about the WS-200 and is the answer not in the manual?
Questions and answers