Table of Contents Child Restraint and Seatbelt Introduction Maintenance ..........35 About This Manual ..........7 Seatbelt Extensions ........35 Perchlorate ............7 Ford Credit ............7 Supplementary Restraints Replacement Parts Recommendation System ................8 Principle of Operation .........36 Special Notices ..........8 Driver and Passenger Airbags ....37 Mobile Communications Equipment Crash Sensors and Airbag Indicator ..41...
Page 6
Table of Contents Instrument Lighting Dimmer ....53 Seats Daytime Running Lamps - Vehicles With: Sitting in the Correct Position ....77 Configurable Daytime Running Lamps Head Restraints ..........77 ................53 Manual Seats ..........78 Daytime Running Lamps - Vehicles With: Power Seats ............79 Daytime Running Lamps (DRL) ..54 Direction Indicators ........54 Auxiliary Power Points...
Page 7
Table of Contents Using Traction Control ........101 Floor Mats ............137 Stability Control Roadside Emergencies Principle of Operation ........102 Hazard Flashers ...........139 Using Stability Control ......103 Jump Starting the Vehicle ......139 Transporting the Vehicle ......140 Parking Aids Crash and Breakdown Rear View Camera ........104 Information Cruise Control Roadside Assistance ........142...
Page 8
Table of Contents Automatic Transmission Fluid Check Motorcraft Parts - 7.3L .......227 ................171 Bulb Specification Chart ......228 Brake Fluid Check .........173 Engine Oil Capacity and Specification Power Steering Fluid Check .....174 ................229 Changing the 12V Battery ......174 Cooling System Capacity and Specification ..........230 Adjusting the Headlamps ......176 Fuel Tank Capacity ........231...
Page 9
Table of Contents Ford Protect Ford Protect ..........247 Scheduled Maintenance General Maintenance Information ..249 Normal Scheduled Maintenance ..252 Special Operating Conditions Scheduled Maintenance ..........255 Customer Information Radio Frequency Certification Labels ................258 Warranty Information ........270 Appendices Electromagnetic Compatibility ....272 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 10
2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about your vehicle, the greater the safety and pleasure you will get from driving it.
A great way For more information about Ford Pro • to know for sure you are getting this level FinSimple, visit of protection is to use genuine Ford https://fordpro.com/en-us/financing/. replacement collision parts. Warranty on Replacement Parts REPLACEMENT PARTS...
Page 13
Using your Vehicle as an to connect their equipment to the data Ambulance link connector. If your light truck has the Ford Ambulance Your vehicle has an OBD Data Link Preparation Package, it may be utilized as Connector (DLC) that is used in an ambulance.
Contact Us or by devices while driving. phone at 1 877 840 4338. Use of your Ford light truck as an Using mobile communications equipment ambulance, without the Ford Ambulance is becoming increasingly important in the Preparation Package voids the Ford New conduct of business and personal affairs.
Symbols Glossary Child safety door lock or unlock SYMBOLS USED ON YOUR VEHICLE Child seat lower anchor These are some of the symbols you may E139211 see on your vehicle. Airbag Child seat tether anchor E141128 E67017 Air conditioning system Cruise control E162384 E332905...
Page 16
Symbols Glossary Fuel pump reset Malfunction Indicator Lamp E67028 (MIL) Note operating instructions Fuse compartment E72343 E139214 Panic alarm Hazard flashers E75790 Headlamp high beams Parking aid E67019 E139213 Headlamps on Parking lamps E71341 E270968 Heated rear window Passenger airbag activated E270849 Hill descent control Passenger airbag deactivated...
Page 17
Symbols Glossary Shield the eyes E167012 Stability control E138639 Stability control off E130458 Trail control E332910 Turn Signal E67018 Windshield defrosting system E73953 Windshield wiping system E270969 Windshield wash and wipe E270967 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
If you use our services, we collect and use recommend that you visit the local Ford data, for example account information, website for the latest information. vehicle location and driving characteristics, that could identify you.
Data Privacy you, where permitted by law. For Canada SERVICE DATA only, for more information, please review the Ford of Canada privacy policy at Service data recorders in your vehicle are www.ford.ca, including our U.S. data capable of collecting and storing storage and use of service providers in diagnostic information about your vehicle.
The data is refer to your local Ford website. stored locally in the vehicle or on devices Note: The modem continues to send this that you connect to it, for example, a USB information unless you disable the modem drive or digital music player.
Data Privacy EMERGENCY CALL SYSTEM DATA (IF EQUIPPED) When the emergency call system is active, it may disclose to emergency services that your vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off. Certain versions or updates to the emergency call system may also be capable of electronically or verbally disclosing to emergency services...
Environment PROTECTING THE ENVIRONMENT Sustainability is a priority at Ford. We are constantly looking for ways to reduce our impact on the planet while providing customers with great products and delivering a strong business. You should play your part in protecting the environment.
At a Glance INSTRUMENT PANEL E307562 Direction indicators. See Direction Indicators (page 54). Wiper lever. See Windshield Wipers (page 51). Information display control. See Information Display Control (page 50). Instrument cluster. See General Information (page 65). Audio control. Gearshift lever. See Automatic Transmission (page 94). Auxiliary switches.
Page 24
At a Glance Cruise control. See Cruise Control (page 105). Lighting control. See Lighting Control (page 52). 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Child Safety GENERAL INFORMATION (CPST) to make sure that you properly install the child restraint in your vehicle See the following sections for directions and that you consult your pediatrician to on how to properly use safety restraints make sure you have a child restraint for children.
Page 26
Child Safety Recommendations for Safety Restraints for Children Recommended Restraint Child Child Size, Height, Weight, or Age Type Use a child restraint Infants or Children weighing 40 lb (18 kg) or less (sometimes called an toddlers (generally age four or younger). infant carrier, convertible seat, or toddler seat).
Child Safety INSTALLING CHILD WARNING: Depending on where RESTRAINTS you secure a child restraint, and depending on the child restraint design, Child Seats you may block access to certain seatbelt buckle assemblies and LATCH lower anchors, rendering those features potentially unusable. To avoid risk of injury, make sure occupants only use seating positions where they are able to be properly restrained.
Page 28
Child Safety 3. While holding the shoulder and lap belt portions together, route the tongue through the child restraint according to the child restraint manufacturer's instructions. Make sure that you did not twist the belt webbing. E142528 Position the child restraint in a seat with a combination lap and shoulder belt.
Page 29
Child Safety 6. Allow the belt to retract to remove slack. The belt clicks as it retracts to indicate it is in the automatic locking mode. Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode.
Page 30
Child Safety Note: Do not tighten the tether strap enough to lift the child restraint off the vehicle seat cushion when the child is seated in it. Keep the tether strap just snug without lifting the front of the child restraint. Keeping the child restraint just touching the vehicle seat gives the best protection in a severe crash.
Child Safety Does the lap belt rest low across the BOOSTER SEATS • hips? Is the shoulder belt centered on the • shoulder and chest? WARNING: Do not put the shoulder Can the child stay seated like this for section of the seatbelt or allow the child •...
Page 32
Child Safety If, with a backless booster seat, you cannot find a seating position that adequately supports your child's head, a high back booster seat would be a better choice. Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest...
Child Safety If the booster seat slides on the vehicle and warnings provided by your vehicle seat upon which it is being used, placing a manufacturer. A safety seat that is rubberized mesh sold as shelf or carpet improperly installed or utilized, is liner under the booster seat may improve inappropriate for your child's height, age, this condition.
Page 34
Child Safety Recommendations for Attaching Child Restraints Use Any Attachment Method as Indicated Below by X. Combined Weight of Restraint Type Seatbelt and Top Child and Child Seatbelt Only Tether Anchor Restraint Rear-facing Up to 65 lb (29.5 kg) child restraint Rear-facing Over 65 lb (29.5 kg) child restraint...
Seatbelts PRINCIPLE OF OPERATION WARNING: Each seating position in your vehicle has a specific safety belt assembly which is made up of one WARNING: Always drive and ride buckle and one tongue that are designed with the seat backrest upright and the to be used as a pair.
Seatbelts Height adjuster at the front outboard • seating positions. Safety belt pretensioner at the front • outboard seating positions. E71880 Safety belt warning light and chime. • E67017 Crash sensors and monitoring system E142588 • with readiness indicator. 2. To unfasten, press the release button The safety belt pretensioners at the front and remove the tongue from the seating positions are designed to tighten...
Page 37
Seatbelts Pregnant women should always wear their small length of webbing back toward the seatbelt. Position the lap belt portion of a stowed position. For rear seatbelts, recline combination lap and shoulder belt low the rear seat backrest or push the seat across the hips below the belly and worn backrest cushion away from the seatbelt.
Seatbelts How to Disengage the Automatic Locking Mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive (emergency) locking mode. SEATBELT HEIGHT ADJUSTMENT E190812 To adjust the shoulder belt height: WARNING: Position the safety belt Press the button and slide the height height adjuster so that the belt rests...
Seatbelts CHILD RESTRAINT AND WARNING: Only use extensions SEATBELT MAINTENANCE provided free of charge by our dealers. The dealer will provide an extension Inspect the vehicle seatbelts and child designed specifically for this vehicle, restraint systems periodically to make sure model year and seating position.
Supplementary Restraints System PRINCIPLE OF OPERATION WARNING: Several airbag system components get hot after inflation. To reduce the risk of injury, do not touch WARNING: Airbags do not inflate them after inflation. slowly or gently, and the risk of injury from a deploying airbag is the greatest WARNING: If a supplementary close to the trim covering the airbag...
Supplementary Restraints System particularly to occupants who are not · Crash sensors and monitoring properly restrained or are otherwise out of system with readiness indicator. E67017 position at the time of airbag deployment. See Crash Sensors and Airbag Thus, it is extremely important that Indicator (page 41).
Page 42
Supplementary Restraints System WARNING: If your vehicle has rear seats, always transport children who are 12 and younger in the rear seat. Always use seatbelts and child restraints properly. Do not place a child in a rear facing infant seat in the front seat unless your vehicle is equipped with an airbag on and off switch and the passenger airbag is turned off.
Page 43
Supplementary Restraints System The passenger side airbag should always concentration of force on an occupant's be on (the airbag off light should not be chest and to reduce the risk of certain illuminated) unless the passenger is a bone fractures and injuries to underlying person who meets the requirements stated organs.
Page 44
Supplementary Restraints System 3. Medical condition. A passenger has a My vehicle has no rear seat. • medical condition which, according to his The rear seat in my vehicle cannot • or her physician: accommodate a rear-facing infant seat. Causes the passenger airbag to pose •...
Supplementary Restraints System Proper Driver and Front Passenger Seating Adjustment WARNING: National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 in (25 cm) between an occupant's chest and the driver airbag module. To properly position yourself away from E142846 the airbag: Children must always be properly...
Supplementary Restraints System The restraints control module also The fact that the seatbelt pretensioners monitors the readiness of the above safety or airbags did not activate in a crash does devices plus the crash sensors. The not mean that something is wrong with the readiness of the safety system is indicated system.
Keys and Remote Controls Note: If you are in range, the remote control GENERAL INFORMATION ON will operate if you press any button RADIO FREQUENCIES unintentionally. Note: The remote control contains This device complies with Part 15 of the sensitive electrical components. Exposure FCC Rules and with Licence exempt RSS to moisture or impact may cause permanent Standards of Industry Canada.
Page 48
Keys and Remote Controls Changing the Remote Control Battery WARNING: Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention. WARNING: If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible.
Keys and Remote Controls Note: The panic alarm operates regardless of the ignition position. REPLACING A LOST KEY OR REMOTE CONTROL Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. E195661 3.
Doors and Locks Unlocking the Doors (Two-Stage LOCKING AND UNLOCKING Unlock) You can use the power door lock control Press the button to unlock the or the remote control to lock and unlock driver door. your vehicle. E138629 Note: Do not use the door latch assembly Press the button again within three to attach any accessory, such as handles or seconds to unlock all doors.
Page 51
Doors and Locks Note: If any door is open, the horn sounds 2. Press the power door unlock control three times. twice and the direction indicators do not flash. 3. Switch the ignition off. 4. Press the power door unlock control Autolock three times.
Your vehicle may have two integrated keyhead transmitters. Note: The system is not compatible with The integrated keyhead transmitter non-Ford aftermarket remote start systems. functions as a programmed ignition key Use of these systems could result in engine that starts your vehicle.
Steering Wheel ADJUSTING THE STEERING CRUISE CONTROL - VEHICLES WHEEL WITH: ADAPTIVE CRUISE CONTROL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 77).
Steering Wheel INFORMATION DISPLAY CONTROL E191336 See Information Displays (page 65). HORN E270945 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Wipers and Washers WINDSHIELD WIPERS WINDSHIELD WASHERS Note: Fully defrost the windshield before you switch the windshield wipers on. Note: Make sure you switch the windshield wipers off before entering a car wash. Note: If streaks or smears appear on the windshield, clean the windshield and the wiper blades.
Lighting GENERAL INFORMATION LIGHTING CONTROL Condensation in the Exterior Front Lamps and Rear Lamps Exterior front lamps and rear lamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold.
Lighting Flashing the Headlamp High Beam Windshield Wiper Activated Headlamps When you switch the autolamps on, the headlamps turn on within 10 seconds of switching the wipers on. They turn off approximately 60 seconds after you switch the windshield wipers off. The headlamps do not turn on with the wipers: During a single wipe.
Lighting Switch the daytime running lamps on or DIRECTION INDICATORS off using the touchscreen: Select Settings. 2. Select Vehicle. 3. Select Lighting. The daytime running lamps turn on when: The lamps are on in the information display. 2. You switch the ignition on. 3.
Automatic High Beam Control (If Equipped) The system detects severe rain, snow WHAT IS AUTOMATIC HIGH • or fog. BEAM CONTROL The camera is blocked. • The system turns on high beams if it is dark The vehicle speed falls below •...
Automatic High Beam Control (If Equipped) OVERRIDING AUTOMATIC HIGH BEAM CONTROL WARNING: The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off. WARNING: You may need to override the system when approaching other road users.
Windows and Mirrors POWER WINDOWS EXTERIOR MIRRORS (IF EQUIPPED) (IF EQUIPPED) Power Exterior Mirrors (If Equipped) WARNING: Do not leave children unattended in your vehicle and do not WARNING: Do not adjust the let them play with the power windows. mirrors when your vehicle is moving.
Windows and Mirrors Telescoping Mirrors Automatic Dimming Mirror (If Equipped) (If Equipped) Note: Do not block the sensors on the front and back of the mirror. A rear center passenger or raised rear center head restraint may also block light from reaching the sensor.
Instrument Cluster GAUGES 2.3 Inch Display E219638 Engine oil pressure gauge. Engine coolant temperature gauge. Fuel gauge. Transmission fluid temperature gauge. Speedometer. Information display. See General Information (page 65). Tachometer. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 64
Instrument Cluster 8 Inch Display E299699 Engine oil pressure gauge. Engine coolant temperature gauge. Fuel gauge. Transmission fluid temperature gauge. Speedometer. Information display. See General Information (page 65). Tachometer. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 65
Instrument Cluster Engine Oil Pressure Gauge Low Fuel Reminder A low fuel level reminder displays and Indicates engine oil pressure. At normal sounds when the distance to empty operating temperature, the level indicator reaches 50 mi (80 km), 25 mi (40 km), is in the normal range.
Instrument Cluster Brake System Warning Lamp WARNING LAMPS AND INDICATORS WARNING: Driving your vehicle The following warning lamps and with the warning lamp on is dangerous. indicators alert you to a vehicle condition A significant decrease in braking that may become serious. Some lamps performance may occur.
Page 67
Instrument Cluster Engine Coolant Temperature It also illuminates momentarily when you Warning Lamp switch the ignition on to confirm the lamp is functional. If it does not illuminate when If it illuminates when your vehicle you switch the ignition on, or begins to E103308 is moving, this indicates that the flash at any time, have the system checked...
Instrument Cluster Traction Control Indicator It flashes during a traction control event. E138639 If it does not illuminate when you switch the ignition on, or remains on when the engine is running, this indicates a malfunction. Have your vehicle checked as soon as possible.
Information Displays Information Display Controls GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Page 70
Information Displays Trip 1 or 2 Instant fuel economy. • Average fuel economy. • Displays the following of an individual journey. Average speed. • Distance to empty. • Digital speed. • Distance. Note: Hold OK to reset fuel history and •...
Page 71
Information Displays Main Menu MyView Trip/Fuel Vehicle Info Settings MyView MyView Trip 1 Fuel Economy Configure MyView For more options, press the OK button. Trip/Fuel Trip/Fuel Trip 1 Trip 2 Fuel Economy Fuel History Fuel Economy Trip 1 or 2 Displays your instantaneous fuel usage as Displays the following of an individual a bar graph and average mpg.
Page 72
Information Displays Vehicle Info Vehicle Info Gauge View Digital Speedometer Engine Information Maintenance Monitor Transmission Temp Engine Information - Shows engine hours, engine idle hours and engine oil temp and • oil life. Settings Settings Driver Alert Turn On or Off Pre-Collision Select Your Setting Cruise...
Information Displays Press the OK button to acknowledge and INFORMATION MESSAGES remove some messages from the information display. The information Note: Depending on your vehicle options display will automatically remove other and instrument cluster type, not all messages after a short period of time. messages display or are available.
Page 74
Information Displays Engine Message Action Power Reduced to Lower Engine The engine has reduced power to help reduce high Temp engine temperature. Fuel Message Action Fuel Level Low An early reminder of a low fuel condition. Check Fuel Fill Inlet The fuel fill inlet may not be properly closed.
Page 75
Information Displays Message Action Brake Fluid Level Low The brake fluid level is low, inspect the brake system immedi- ately. See Brake Fluid Check (page 173). Check Brake System The brake system needs servicing. Stop your vehicle in a safe place.
Page 76
Information Displays Traction Control Message Action Traction Control Off The status of the traction control system after you switched it off. See Using Traction Control (page 101). Traction Control On The status of the traction control system after you switched it on.
Page 77
Information Displays Message Action Transmission Indicat- Displays when the transmission shift lever is locked and unable Mode Lockup On to select gears. Transmission Indicat- Displays when the transmission shift lever is unlocked and Mode Lockup Off free to select gears. Transmission Over- The transmission is overheating and needs to cool.
Climate Control Setting the Temperature MANUAL CLIMATE CONTROL Heater Only System (If Equipped) E266045 E266046 Turn the control to set the temperature. Switching the Heater On and Off Turn the control. E265297 Manual Climate Control (If Equipped) E305221 Note: Depending on your vehicle option package, the controls may look different from what you see here.
Climate Control Direct air to the windshield air HINTS ON CONTROLLING THE vents. You can also use this INTERIOR CLIMATE setting to defog and clear the windshield of a thin covering of ice. General Hints Switching the Air Conditioning On and Note: Prolonged use of recirculated air may cause the windows to fog up.
Climate Control 3. Direct air to the footwell air vents. REAR PASSENGER CLIMATE CONTROLS Quickly Cooling the Interior Switch MAX A/C on. Setting the Blower Motor Speed 2. Drive with the windows open until you feel cold air through the air vents. Recommended Settings for Cooling Adjust the fan speed to the center...
Seats We recommend that you follow these SITTING IN THE CORRECT guidelines: POSITION Sit in an upright position with the base • of your spine as far back as possible. Do not recline the seat backrest so that • WARNING: Sitting improperly, out your torso is more than 30 degrees of position or with the seatback reclined from the upright position.
Seats Recline Adjustment The front row outboard non-adjustable (If Equipped) head restraints consist of a trimmed foam covering over the upper structure of the seatback. Properly adjust the seatback to WARNING: Do not place cargo or an upright driving or riding position, so that any objects behind the seat backrest the head restraint is positioned as close as before returning it to the original position.
Seats The lumbar control is on the inboard side of the driver seat. Turn the control to adjust your support. POWER SEATS (IF EQUIPPED) WARNING: Do not adjust the driver seat or seat backrest when your vehicle is moving. This may result in sudden seat movement, causing the loss of control E190819 of your vehicle.
Auxiliary Power Points 12 Volt DC Power Point Locations Power points could be in the following locations: WARNING: Do not plug optional On the instrument panel. • electrical accessories into the cigar lighter socket. Incorrect use of the cigar Inside the glove box. •...
Page 85
Auxiliary Power Points To gain access to the outlet contacts, press the plug against the outlet and rotate clockwise. When the indicator light on the power point On: The power point is working, the • ignition is on and a device is plugged Off: The power point is off, the ignition •...
Starting and Stopping the Engine If you disconnect the battery, your vehicle GENERAL INFORMATION may exhibit some unusual driving characteristics for approximately 6 mi (10 km) after you reconnect it. This is WARNING: Extended idling at high because the engine management system engine speeds can produce very high must realign itself with the engine.
Starting and Stopping the Engine Note: Do not leave the ignition key in this 2. Shift into park (P). position for too long. This could cause your 3. Fully press and hold the accelerator vehicle battery to lose charge. pedal. II (on) - All electrical circuits are 4.
Starting and Stopping the Engine Guarding Against Exhaust Fumes The heater acts as a starting aid by warming the engine coolant. This allows the climate control system to respond quickly. The equipment includes a heater WARNING: Exhaust leaks may element (installed in the engine block) and result in entry of harmful and potentially a wire harness.
Page 89
Starting and Stopping the Engine Make sure the system is unplugged and • properly stowed before starting and driving your vehicle. Make sure the protective cover seals the prongs of the block heater cord plug when not in use. Make sure the heater system is •...
Fuel and Refueling Avoid inhaling fuel vapors. Inhaling fuel SAFETY PRECAUTIONS • vapor can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of WARNING: Do not overfill the fuel fuel vapor can cause serious illness and tank.
Fuel and Refueling Some fuel stations, particularly those in Fuels containing the octane booster • high altitude areas, offer fuels posted as additive, methylcyclopentadienyl regular unleaded gasoline with an octane manganese tricarbonyl (MMT). rating below 87. The use of these fuels Leaded fuel, using leaded fuel is •...
WARNING: Keep children away fuel tank or fuel system if the correct from the fuel pump. Never let children genuine Ford, Motorcraft or other certified pump fuel. fuel filler cap is not used. WARNING: Wait at least five Your vehicle has a threaded fuel filler cap.
Fuel and Refueling Fuel Economy 3. Carefully turn the fuel filler cap counterclockwise until it spins off. Your vehicle calculates fuel economy 4. Pull to remove the cap from the fuel figures through the trip computer average filler pipe and place on the fuel door fuel function.
Engine Emission Control Tampering With a Noise Control EMISSION LAW System Federal laws prohibit the following acts: WARNING: Do not remove or alter Removal or rendering inoperative by • the original equipment floor covering or any person other than for purposes of insulation between it and the metal floor maintenance.
Never work around or attempt your vehicle and to its emissions system. to repair any part of the exhaust system If you use anything other than Ford, until it has cooled. Use special care when Motorcraft or Ford-authorized parts for working around the catalytic converter.
Page 96
Engine Emission Control Illumination of the service engine soon Your vehicle has run out of fuel—the indicator, charging system warning light or engine may misfire or run poorly. the temperature warning light, fluid leaks, 2. Poor fuel quality or water in the strange odors, smoke or loss of engine fuel—the engine may misfire or run power could indicate that the emission...
Page 97
Engine Emission Control Your vehicle may not pass the I/M test if the service engine soon indicator is on or not working properly (bulb is burned out), or if the OBD-II system has determined that some of the emission control systems have not been properly checked.
Transmission Neutral (N) AUTOMATIC TRANSMISSION With the transmission in neutral (N), you can start your vehicle and it is free to roll. Hold the brake pedal down when in this WARNING: Apply the parking position. brake, shift into park (P), switch the ignition off and remove the key before Drive (D) you leave your vehicle.
Page 99
Transmission Understanding Your SelectShift Tow/Haul Mode Automatic Transmission To activate tow/haul, press the button on the gearshift lever. E161509 The TOW HAUL indicator light illuminates in the instrument cluster. The tow/haul feature: Delays upshifts to reduce the frequency • of transmission shifting. Provides engine braking in all forward •...
Page 100
Transmission Progressive Range Selection - PRS WARNING: When doing this (If Equipped) procedure, you need to take the Progressive Range Selection gives you the transmission out of park (P) which ability to lockout gears from the automatic means your vehicle can roll freely. To shifting range.
Page 101
Transmission 4. Place your fingers into the hole where you removed the gearshift lever boot and pull the top half of the shroud up and forward to separate it from the lower half of the shroud. There is a hinge at the forward edge of the top of the shroud.
Brakes If it illuminates when you are GENERAL INFORMATION E67020 driving, your vehicle requires service. Your vehicle continues Note: Occasional brake noise is normal. If to have normal braking without the a metal-to-metal, continuous grinding or anti-lock brake system function. Have your continuous squeal sound is present, the vehicle checked as soon as possible.
Brakes The sound of the pump operating may be PARKING BRAKE heard by the driver. This is a normal characteristic of the system. The reserve system provides reduced WARNING: Apply the parking braking power, so the vehicle should be brake, shift into park (P), switch the operated under these conditions with ignition off and remove the key before caution, and only to seek service repair and...
Brakes Using Hill Start Assist HILL START ASSIST Press the brake pedal to bring your vehicle to a complete standstill. Keep WARNING: The system does not the brake pedal pressed and shift into replace the parking brake. When you first gear when facing uphill or reverse leave your vehicle, always apply the (R) when facing downhill.
Traction Control System Indicator Lights and PRINCIPLE OF OPERATION Messages The traction control system helps avoid The traction control light drive wheel spin and loss of traction. temporarily illuminates on E138639 If your vehicle begins to slide, the system engine start-up and flashes applies the brakes to individual wheels when a driving condition activates the and, when needed, reduces engine power...
Stability Control If a fault occurs in either the stability PRINCIPLE OF OPERATION control or the traction control system, you may experience the following conditions: The stability and traction control light • WARNING: Vehicle modifications illuminates steadily. involving braking system, aftermarket roof racks, suspension, steering system, The stability control and traction •...
Stability Control E72903 Vehicle without stability control skidding off its intended route. Vehicle with stability control maintaining control on a slippery surface. USING STABILITY CONTROL The system automatically turns on each time you switch the ignition on. You cannot switch the stability control system off, but when you shift into reverse (R), the system deactivates.
Parking Aids Example REAR VIEW CAMERA (IF EQUIPPED) WARNING: The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and E142435 exterior mirrors for maximum coverage. WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the...
Cruise Control (If Equipped) WHAT IS CRUISE CONTROL SETTING THE CRUISE CONTROL SPEED Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. WARNING: When you are going Requirements downhill, your vehicle speed could increase above the set speed.
Cruise Control (If Equipped) CANCELING THE SET SPEED WARNING: Pay close attention to Press the button, or tap the changing road conditions such as brake pedal to cancel the set entering or leaving a highway, on roads E265298 speed. with intersections or roundabouts, roads without visible lanes of travel, roads that Note: The system remembers the set are unpaved, or steep slopes.
Page 111
Cruise Control (If Equipped) Setting the Adaptive Cruise Speed The system adjusts your vehicle speed to maintain the set gap between you and the Drive to your preferred speed. vehicle in front of you in the same lane. You can select four gap settings. E246884 The system uses a radar sensor that projects a beam directly in front of your...
Page 112
Cruise Control (If Equipped) Setting the Gap Distance WARNING: The system only warns You can decrease or increase the distance of vehicles detected by the radar sensor. between your vehicle and the vehicle in In some cases there may be no warning front by pressing the gap control.
Page 113
Cruise Control (If Equipped) Press and release to decrease E246885 Adaptive Cruise Control Gap Settings the set speed in small increments. Graphic Distance Gap Dynamic Display, Behavior Press and hold either button to change the Bars Indic- set speed in large increments. Release the ated button when the set speed has reached Between...
Page 114
Cruise Control (If Equipped) Hilly Condition and Trailer Tow The radar sensor has a limited field of view. Usage It may not detect vehicles at all or detect a vehicle later than expected in some You should select a lower gear when the situations.
Page 115
Cruise Control (If Equipped) In these cases, the system may brake late The camera is mounted on the windshield or unexpectedly. You should stay alert and behind the interior mirror. take action when necessary. if something hits the front end of your vehicle or damage occurs, the radar-sensing zone may change.
Page 116
Cruise Control (If Equipped) Possible causes and actions for the blocked sensor message displaying: Cause Details The surface of the radar is dirty or Clean the grille surface in front of the radar obstructed. sensor or remove the object causing the obstruction.
Driving Aids Note: If the camera is blocked or if the DRIVER ALERT (IF EQUIPPED) windshield is damaged, the system may not function. Note: The system remembers the last WARNING: You are responsible for setting when you start your vehicle, unless controlling your vehicle at all times.
Driving Aids The warning system uses two stages. At first the system issues a temporary warning WARNING: The sensor may that you need to take a rest. This message incorrectly track lane markings as other only appears for a short time. If the system structures or objects.
Page 119
Driving Aids System Display When you switch the lane keeping system on and the camera detects a drift out of the travel lane, the system alerts the driver by playing a chime. Switching the System On and Off Note: The system stores the on or off setting until you manually change it.
Page 120
Driving Aids See Troubleshooting for additional You can temporarily disable the system at information. any time by doing the following: Quick braking. • Green: Indicates that the system is available or ready to provide a warning on Fast acceleration. • the indicated side(s).
Driving Aids Steering Tips STEERING If the steering wanders or pulls, check for: Hydraulic Power Steering An improperly inflated tire. • To help prevent damage to the power Uneven tire wear. • steering system: Loose or worn suspension • Do not hold the steering wheel at its •...
Page 122
Driving Aids Alert. • Brake support. WARNING: System performance • could be reduced in situations where the Active braking. • vehicle camera has limited detection capability. These situations include but are not limited to direct or low sunlight, vehicles at night without tail lights, unconventional vehicle types, and pedestrians and cyclists with complex, partially obscured backgrounds.
Page 123
Driving Aids Distance Indication and Alert Adjusting the Pre-Collision Assist Settings Provides the driver with a graphical indication of the time gap to other You can adjust the following settings by preceding vehicles traveling in the same using the instrument cluster display direction.
Page 124
Driving Aids If a message regarding a blocked sensor system may not function, or performance or camera appears in the instrument may reduce. The following table lists cluster display, the radar signals or camera possible causes and actions for when this images are obstructed.
Page 125
Driving Aids Note: If something hits the front end of your vehicle or damage occurs and your vehicle has a radar sensor, the radar sensing zone may change. This could cause missed or false vehicle detections. Contact an authorized dealer to have the radar checked for proper coverage and operation.
Load Carrying LOAD LIMIT Tire and Loading Label Information Example: Vehicle Loading - with and without a Trailer This section guides you in the proper loading of your vehicle, trailer, or both. Keep your loaded vehicle weight within its design rating capability, with or without a trailer.
Page 127
Load Carrying is the maximum payload for your The total load on each axle must vehicle as built by the assembly never exceed its Gross Axle plant. If you install any additional Weight Rating. equipment on your vehicle, you GVWR (Gross Vehicle Weight must determine the new payload.
Page 128
Load Carrying be used for safe control of towed vehicles and for trailers where the WARNING: Exceeding the Gross Combined Weight of the Safety Compliance Certification towing vehicle plus the trailer label vehicle weight limits can exceed the Gross Vehicle Weight adversely affect the Rating of the towing vehicle.
Page 129
Load Carrying Steps for determining the Helpful examples for calculating correct load limit: the available amount of cargo and luggage load capacity 1. Locate the statement "The combined weight of occupants Suppose your vehicle has a and cargo should never exceed 1400-pound (635-kilogram) cargo XXX kg or XXX lb."...
Page 130
Load Carrying - 1200 = - 240 pounds. No, you do handle differently than unloaded not have enough cargo capacity vehicles. Take extra precautions, to carry that much weight. In such as slower speeds and metric units, the calculation would increased stopping distance, be: 635 kilograms - (2 x 99 when driving a heavily loaded...
Towing Load Placement TOWING A TRAILER To help minimize how trailer movement affects your vehicle WARNING: Do not exceed when driving: the GVWR or the GAWR Load the heaviest items closest • specified on the certification to the trailer floor. label.
Towing You can also find information in available at your authorized the RV & Trailer Towing Guide dealer, or online. RV & Trailer Towing Guide Online Website http://www.fleet.ford.com/towing-guides/ RECOMMENDED TOWING WEIGHTS Market Website United States of America https://www.fordpro.com/en-us/ fleet-vehicles/manuals-and- guides/ Canada https://www.fordpro.com/en-us/...
Towing When attaching the trailer wiring connector ESSENTIAL TOWING CHECKS to your vehicle, only use a proper fitting connector that works with the vehicle and Follow these guidelines for safe towing: trailer functions. Some seven-position Do not tow a trailer until you drive your •...
Page 134
Always connect the safety chains to the frame or hook retainers of your vehicle Note: The Ford trailer brake controller has hitch. been verified to be compatible with trailers To connect the safety chains, cross the...
Page 135
Towing The controller shows gain setting, output bar graph, and trailer connectivity status in the information display. They appear in the information display as follows: Trailer Brake Controller Gain (without • trailer connected): Shows the current gain setting during a given ignition cycle and when adjusting the gain.
Page 136
However, your Ford warranty does not cover Set the gain to provide the maximum this diagnosis if the fault is with the trailer. trailer braking assistance while making...
Page 137
• Adjust gain setting before using the • factory-installed or dealer-installed trailer brake controller for the first time. item. Ford is not responsible for Adjust gain setting, see Procedure for • warranty or performance of the Adjusting Gain, whenever road,...
Page 138
Towing When Towing a Trailer 2. Set your vehicle parking brake. 3. Place the automatic transmission in Do not drive faster than 70 mph • park (P). (113 km/h) during the first 500 mi (800 km). 4. Place wheel chocks in front and back of the trailer wheels.
Towing TOWING THE VEHICLE ON FOUR WHEELS Emergency Towing WARNING: If your vehicle has a steering wheel lock make sure the ignition is in the accessory or on position when being towed. You can flat-tow (all wheels on the ground, regardless of the powertrain or transmission configuration) your disabled vehicle (without access to wheel dollies or vehicle transport trailer) under the...
Driving Hints There are some things to keep in mind that REDUCED ENGINE may improve fuel economy: PERFORMANCE Accelerate and slow down in a smooth, • moderate fashion. Drive at reasonable and steady speeds. • WARNING: If you continue to drive Anticipate stops.
Driving Hints Driving on flat terrain offers improved • fuel economy as compared to driving on hilly terrain. Transmissions give their best fuel • economy when operated in the top cruise gear and with steady pressure on the gas pedal. BREAKING-IN You need to break in new tires for E176913...
Page 142
Driving Hints Note: Regularly check the floor mats to make sure they are secure. WARNING: Secure the floor mat to both retention devices so that it cannot slip out of position and interfere with the pedals. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
Roadside Emergencies HAZARD FLASHERS WARNING: Keep batteries out of Note: If used when the vehicle is not reach of children. Batteries contain running, the battery loses charge. As a result, sulfuric acid. Avoid contact with skin, there may be insufficient power to restart eyes or clothing.
Roadside Emergencies E390417 Note: See the previous image for your vehicle's assigned ground connection point. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the booster vehicle battery.
Page 145
We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
Getting Roadside Assistance within 50 mi (80 km) of the If you have a vehicle concern, Ford Motor disablement location or to the nearest authorized dealer. If a member Company offers a complimentary roadside requests a tow to an authorized dealer assistance program.
Ford Motor Company reserves the right to modify or discontinue Roadside Assistance Note: Not every impact causes a shutoff.
Page 148
Crash and Breakdown Information 4. Attempt to start your vehicle. Note: If your vehicle does not start after the third attempt, have your vehicle checked as soon as possible. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
In Canada: to the authorized dealer. Repairs will be Mailing address made using Ford or Motorcraft® parts, or remanufactured or other parts that are Customer Relationship Centre authorized by Ford. Ford Motor Company of Canada, Limited P.O.
In some states within the United States, conform the vehicle to its applicable you must directly notify Ford in writing express warranties if, within the first 18 before pursuing remedies under your months of ownership of a new vehicle or...
BBB AUTO LINE a Division of BBB During mediation, a representative of the National Programs, Inc. BBB will contact both you and Ford Motor 1676 International Drive, Suite 550 Company to explore options for settlement McLean, VA 22102 of the claim.
Ford Motor Before exporting your vehicle to a foreign Company or Ford of Canada is not country, contact the appropriate foreign responsible for any damage caused by use embassy or consulate. These officials can of improper fuel.
(VIN) and new (Items in this catalog may be purchased address with Ford Global Trade Services by credit card, check or money order.) by emailing, expcso@ford.com. Obtaining a French Owner’s If you are in another foreign country, Manual contact the nearest authorized dealer.
However, information about motor vehicle NHTSA cannot become involved safety from www.safercar.gov. in individual problems between you, your dealer, or Ford Motor REPORTING SAFETY DEFECTS Company. (CANADA ONLY) To contact NHTSA, you may call If you believe that your vehicle has a defect...
Fuses Note: If your vehicle has dual batteries, FUSE SPECIFICATION CHART disconnecting the primary under hood battery does not remove power from all Engine Compartment Fuse Box circuits. The engine compartment fuse box is in the WARNING: Always disconnect the engine compartment.
Page 156
Fuses Item Rating Protected Component 20 A Horn. 50 A Blower motor. Not used. — 30 A Starter relay. 20 A Power point 3. 20 A Upfitter relay 4 (cutaway). Not used (spare) (stripped chassis). Not used. — Not used. —...
Page 157
Fuses Item Rating Protected Component 40 A Body control module - run power in feed 2. 50 A Body control module - run power in feed 1. Not used. — 20 A Body builder frame connector. Not used. — 10 A B+ power 12 V(special order vehicle).
Page 158
Fuses Item Rating Protected Component 10 A Washer relay (stripped chassis). Not used (spare) (cutaway). Not used. — 30 A Trailer brake control connector. 30 A Instrument panel connector (stripped chassis). Not used (spare) (cutaway). Not used. — 10 A A/C clutch.
Page 159
Fuses Item Rating Protected Component 10 A Parking lamps 1 (special order vehicle). Not used. — Not used. — Not used. — Not used. — Not used. — Not used. — Not used. — Not used. — Not used. — 40 A Inverter.
Page 160
Fuses Item Rating Protected Component Upfitter switch (optional location for power at all times). Not used. — Not used. — Not used. — Not used. — Not used. — Not used. — 40 A Hot at all times /B+ power on B-pillar connector (cutaway).
Page 161
Fuses Item Rating Protected Component Not used. — 15 A Trailer tow right-hand and left-hand stoplamp and direction indicator relay power. Note: Spare fuse amperage may vary. The fuse panel is to the left-hand side of Passenger Compartment Fuse Box the brake pedal and mounted onto the lower left-hand cowl panel.
Page 162
Fuses Item Rating Protected Component Not used. — 10 A Left-hand front and right- hand front door lock switch (cutaway). Inverter (cutaway). Connector (stripped chassis). 7.5 A Power mirror switch (cutaway). Not used (stripped chassis). — 20 A Not used (spare). 20 A Not used (spare).
Page 163
Fuses Item Rating Protected Component Radio transceiver module and telematics control unit (cutaway). Telematics control unit (stripped chassis). Ignition switch. Not used. Body builder B-pillar connector (cutaway). Not used (stripped chassis). 30 A Not used (spare). 30 A Not used (spare). 20 A Not used (spare).
Fuses Item Rating Protected Component 30 A Power window switches and motors (cutaway). Not used (stripped chassis). — Note: Spare fuse amperage may vary. CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified E217331 amperage rating.
Page 165
Fuses Micro 2. Micro 3. Maxi. Mini. M Case. J Case. J Case Low Profile. Slotted M Case. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Maintenance Working with the Engine On GENERAL INFORMATION Have your vehicle serviced regularly to help WARNING: To reduce the risk of maintain its roadworthiness and resale vehicle damage and personal burn value. There is a large network of injuries, do not start your engine with the authorized dealers that are there to help air cleaner removed and do not remove you with their professional servicing...
Maintenance 6. If the oil level is at the minimum mark, ENGINE OIL DIPSTICK immediately add oil. Reinstall the dipstick. Make sure it is fully seated. Note: The oil consumption of new engines reaches its normal level after approximately 3,000 mi (5,000 km). Note: Increases in oil level can occur from frequent short trips that do not allow the engine to get to operating temperature, as...
Maintenance Note: Immediately soak up any oil spillage From the main menu scroll to: with an absorbent cloth. Message Action and Description Engine Oil Pressure Warning Lamp Driver Press the right arrow button, assist then from this menu scroll WARNING: If it illuminates when down to the following you are driving do not continue your message.
Maintenance Note: Failure to use the correct air filter From the main menu scroll to: element may result in severe engine damage. The customer warranty may be Message Action and Description void for any damage to the engine if the correct air filter element is not used.
Maintenance 4. Install the new filter element. Be Note: Coolant expands when it is hot. The careful to put the filter seal on top of level may extend beyond the MAX mark. the tray, making sure that the seal is Maintain coolant concentration within not pushed down into the tray.
Page 172
Must drain the cooling system. Note: Coolants marketed for all makes and 2. Chemically clean the coolant system. models may not be approved to Ford specifications and may damage the cooling 3. Refill with coolant that meets the system. Resulting component damage may correct specification.
Page 173
Maintenance Recycled Coolant Fail-Safe Cooling We do not recommend the use of recycled Fail-safe cooling allows you to temporarily coolant as an approved recycling process drive your vehicle before any incremental is not yet available. component damage occurs. The fail-safe distance depends on ambient Dispose of used engine coolant in an temperature, vehicle load and terrain.
Page 174
Maintenance Engine Coolant Temperature mode, your vehicle will have limited Management (If Equipped) power, will not be able to maintain high-speed operation, and may completely shut down without warning, WARNING: To reduce the risk of potentially losing engine power, power crash and injury, be prepared that the steering assist, and power brake assist, vehicle speed may reduce and the...
Maintenance Pull off the road as soon as safely Automatic transmission fluid expands possible and shift the transmission into when warmed. Obtain an accurate reading park (P). as follows : 2. Leave the engine running until the Drive the vehicle approximately 19 mi coolant temperature gauge needle (30 km) to reach normal operating returns to the normal position.
Page 176
Maintenance Correct Fluid Level Adjusting Automatic Transmission Fluid Levels Note: Use of a non-approved automatic transmission fluid may cause internal transmission component damage. Make sure to use the correct type of fluid. You can find the type of fluid used on the transmission dipstick, or in your Owner's Manual.
Maintenance Automatic Transmission Fluid Filter WARNING: Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your physician. WARNING: The brake system could be affected if the brake fluid level is below the MIN mark or above the MAX mark on the brake fluid reservoir.
Only use fluid that meets Ford personal injury and damage to the specifications. See Hydraulic Power vehicle or battery. Lift the battery with a...
Page 179
Maintenance Always dispose of automotive batteries in a responsible manner. Follow your local WARNING: Keep batteries out of authorized standards for disposal. Call your reach of children. Batteries contain local authorized recycling center to find sulfuric acid. Avoid contact with skin, out more about recycling automotive eyes or clothing.
Maintenance Dual Batteries When the battery is disconnected or a new (If Equipped) battery installed, the transmission must Your vehicle may be fitted with a relearn its adaptive strategy. As a result of frame-mounted battery located on the this, the transmission may shift firmly. This passenger side frame rail, behind the front operation is considered normal and fully passenger door.
Page 181
Maintenance E142592 E142465 4. On the wall or screen, you will observe 8 feet (2.4 meters). a flat zone of high intensity light Center height of lamp to ground. located at the top of the right hand portion of the beam pattern. If the top 25 feet (7.6 meters).
Add fluid to fill the reservoir if the level is the blades. low. Only use a washer fluid that meets Ford specifications. See Capacities and Specifications (page 226). State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive.
Maintenance Note: Make sure that the wiper blade locks CHANGING A BULB into place. Lower the wiper arm and blade back on the windshield. The wiper arms will Lamp Assembly Condensation automatically return to their normal position when you turn the ignition on. Exterior lamps are vented to accommodate normal changes in Replace wiper blades at least once per...
Page 184
Maintenance Note: If the bulb is accidentally touched, Make sure the headlamp switch is in the off position, then open the hood. clean it with rubbing alcohol before use. 2. Remove the headlamp assembly. Refer Make sure the headlamp switch is in to Replacing Headlamp Bulbs in this the off position, then open the hood.
Page 185
Maintenance E163828 2. Remove the four screws and the lamp lens from the lamp assembly. 3. Carefully pull the bulb straight out of the socket and push in the new bulb. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Vehicle Care GENERAL INFORMATION CLEANING PRODUCTS Materials Your dealer has many quality products available to clean your vehicle and protect For best results, use the following products its finishes. or products of equivalent quality: For additional information and assistance, we recommend that you contact an authorized dealer.
Vehicle Care Cleaning the Exterior Lamps CLEANING THE EXTERIOR Note: Do not scrape the exterior lamps Wash your vehicle regularly with cool or lenses or use abrasives, alcoholic solvents lukewarm water and a neutral pH or chemical solvents to clean them. shampoo, we recommend Motorcraft Note: Do not wipe the exterior lamps when Detail Wash.
Vehicle Care Use a spray with a 40 degree wide Do not allow wax to come in contact • • spray angle pattern. with any non-body (low-gloss black) colored trim. The wax will discolor or Keep the nozzle at a 12 in (305 mm) •...
Vehicle Care Never wash or rinse the engine while it • CLEANING THE INTERIOR is hot or running; water in the running engine may cause internal damage. Never wash or rinse any ignition coil, • WARNING: Do not use cleaning spark plug wire or spark plug well, or solvents, bleach or dye on the vehicle's the area in and around these locations.
Vehicle Care Wipe up spilled liquid using a clean, CLEANING THE INSTRUMENT soft cloth as quickly as possible. PANEL AND INSTRUMENT 2. Use Motorcraft Premium Leather and CLUSTER LENS Vinyl Cleaner or a commercially available leather cleaning product for automotive interiors. Test any cleaner or stain remover on an inconspicuous WARNING: Do not use chemical area.
2. Remove dirt and brake dust with a sponge. 3. Remove tar and grease with a bug and tar remover. We recommend that you use Ford approved bug and tar remover if available. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 192
Vehicle Care Body Cooling system Wash your vehicle thoroughly to Protect against freezing temperatures. • • remove dirt, grease, oil, tar or mud from When removing your vehicle from • exterior surfaces, rear-wheel housing storage, check coolant fluid level. and the underside of front fenders. Confirm that there are no cooling Periodically wash your vehicle if it is system leaks and that fluid is at the...
Page 193
Vehicle Care Removing Vehicle From Storage When your vehicle is ready to come out of storage, do the following: Wash your vehicle to remove any dirt • or grease film build-up on window surfaces. Check windshield wipers for any • deterioration.
Wheels and Tires Utility vehicles and trucks handle GENERAL INFORMATION differently than passenger cars in the various driving conditions that are Notice to Utility Vehicle, Van and encountered on streets, highways and Truck Owners off-road. Utility vehicles and trucks are not designed for cornering at speeds as high as passenger cars any more than low-slung WARNING: Utility vehicles have a...
Wheels and Tires Higher - to allow higher load carrying • TIRE CARE capacity and to allow it to travel over rough terrain without getting hung up Information About Uniform or damaging underbody components. Tire Quality Grading Shorter - to give it the capability to •...
Page 196
Transportation Tire quality to lowest are AA, A, B, and C. The grades: The U.S. Department of grades represent the tire’s ability Transportation requires Ford to stop on wet pavement as Motor Company to give you the measured under controlled...
Page 197
Wheels and Tires Federal Motor Vehicle Safety *kPa: Kilopascal, a metric unit of Standard No. 139. Grades B and A air pressure. represent higher levels of *PSI: Pounds per square inch, a performance on the laboratory standard unit of air pressure. test wheel than the minimum required by law.
Page 198
Wheels and Tires Information Contained on the A. P: Indicates a tire, designated Tire Sidewall by the Tire and Rim Association, that may be used for service on Both United States and Canada cars, sport utility vehicles, Federal regulations require tire minivans and light trucks.
Page 199
Wheels and Tires G. H: Indicates the tire's speed Letter mph ( km/h) rating. The speed rating denotes rating the speed at which a tire is 168 (270) designed to be driven for extended periods of time under a standard 186 (299) condition of load and inflation Note: For tires with a maximum...
Page 200
Wheels and Tires J. Tire Ply Composition and *Traction: The traction grades, Material Used: Indicates the from highest to lowest are AA, A, number of plies or the number of B, and C. The grades represent the layers of rubber-coated fabric in tire's ability to stop on wet the tire tread and sidewall.
Page 201
Wheels and Tires The tire suppliers may have C. Maximum Load Dual lb (kg) additional markings, notes or at psi (kPa) cold: Indicates the warnings such as standard load maximum load and tire pressure or radial tubeless. when the tire is used as a dual; defined as four tires on the rear Additional Information axle (a total of six or more tires on...
Page 202
Inflate all tires to the edge. In general, the larger the inflation pressure recommended number, the wider the tire. by Ford Motor Company. 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 203
If you do not maintain the inflation pressure at WARNING: Under-inflation the levels specified by Ford, your is the most common cause of vehicle may experience a condition tire failures and may result in known as shimmy.
Page 204
Wheels and Tires the manufacturer’s recommended Note: If you are checking tire cold inflation pressure which can pressure when the tire is hot, (for be found on the Safety example, driven more than 1.0 mi Compliance Certification Label (1.6 km)), never bleed or reduce air (affixed to either the door hinge pressure.
Page 205
Wheels and Tires Note: Some spare tires operate at After inflating the tires while hot, make sure to recheck tire pressure a higher inflation pressure than the later once the tires are cold. other tires. For T type mini-spare tires, (see the Dissimilar spare For Example Only wheel and tire assembly information for a description.
Page 206
Wheels and Tires All tires with Steel Carcass Plies according to Federal Occupational (if equipped): Safety and Health Administration regulations. For example, during This type of tire utilizes steel cords any procedure involving tire in the sidewalls. As such, they inflation, the technician or cannot be treated like normal light individual must utilize a remote...
Page 207
Wheels and Tires E161438 Note: Stay out of the trajectory (1) is suspected, have the tire as indicated in the illustration. demounted and inspected in case it needs to be repaired or replaced. Inspecting Your Tires and For your safety, tires that are Wheel Valve Stems damaged or show signs of excessive wear should not be used...
Page 208
Wheels and Tires Tire Wear or suspected have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended. WARNING: Tires degrade over time depending on many factors such as weather, storage E142546 conditions, and conditions of use When the tread is worn down to...
Page 209
WARNING: For a mounting Tire Replacement pressure more than 20 psi Requirements (1.38 bar) greater than the maximum pressure, a Ford Your vehicle is equipped with tires dealer or other tire service designed to provide a safe ride professional should do the and handling capability.
Page 210
The use of wheels or tires not recommended by Ford Motor WARNING: Do not spin the Company may affect the wheels at over 34 mph operation of your tire pressure (55 km/h).
Page 211
Wheels and Tires HIGH SPEED DRIVING CAN BE DO NOT OVERLOAD: DRIVING DANGEROUS ON ANY OVERLOADED TIRE IS DANGEROUS Correct inflation pressure is especially important. However, at The maximum load rating of your high speeds, even with the correct tires is molded on the tire sidewall. inflation pressure, a road hazard Do not exceed this rating.
Page 212
Wheels and Tires REPAIRS - WHEREVER become dry and more susceptible POSSIBLE, SEE YOUR TIRE to ozone and weather checking RETAILER AT ONCE and the casing becomes susceptible to flat spotting. For If any tire sustains a puncture, this reason, tires should always have the tire demounted and be stored in a cool, dry, clean, thoroughly inspected by a tire...
Page 213
Wheels and Tires FOLLOW THESE MOUNTING Old valves may leak. When new RECOMMENDATIONS tubeless tires are mounted, have new valves of the correct Tire changing can be dangerous type installed. Tubeless tires and must be done by must only be mounted on professionally trained persons wheels designed for tubeless using proper tools and...
Page 214
Wheels and Tires AVOID DRIVING OVER If you feel a sudden vibration or • POTHOLES, OBSTACLES, ride disturbance when driving, or CURBS OR EDGES OF you suspect your tire or vehicle PAVEMENT. has been damaged, immediately reduce your speed. Drive with AVOID EXCESSIVE WHEEL •...
Page 215
Wheels and Tires Tire Rotation Rotating your tires at the recommended interval (as indicated in the Scheduled Maintenance chapter) helps your WARNING: If the tire label tires wear more evenly, providing shows different tire pressures for better tire performance and longer the front and rear tires and the tire life.
Wheels and Tires USING SNOW CHAINS WARNING: Wheels and tires must be the same size, load index and speed rating as those originally fitted on the vehicle. Use of any other tire or wheel can affect the safety and performance of your vehicle.
Wheels and Tires Drive cautiously. If you hear the chains Each tire, including the spare, if • E139232 rub or bang against your vehicle, stop provided, should be checked and retighten the chains. If this does monthly when cold and inflated not work, remove the chains to prevent to the inflation pressure recommended by damage to your vehicle.
Page 218
Wheels and Tires When the malfunction indicator is You should always have your tires serviced illuminated, the system may not be able by an authorized dealer. to detect or signal low tire pressure as Check the tire pressure periodically, at intended.
Page 219
Wheels and Tires Low Tire Pressure Possible Cause Customer Action Required Warning Light Solid warning light Tire(s) under-inflated Make sure tires are at the proper pres- sure. See Inflating your tires in this chapter. After inflating your tires to the manufacturer’s recommended pressure as shown on the Tire Label, located on the edge of driver door or the B-Pillar, the...
Page 220
Wheels and Tires How Temperature Affects Your Tire To provide the vehicle's load carrying Pressure capability, some vehicles require different recommended tire pressures in the front The tire pressure monitoring system tires as compared to the rear tires. The tire monitors tire pressure in each pneumatic pressure monitoring system on these tire.
Page 221
Wheels and Tires 3. Cycle the ignition to the on position 9. Remove the valve cap from the valve with the engine off. stem on the left rear tire. Decrease the air pressure until the horn sounds. 4. Turn the hazard flashers on then off Training is complete after the horn three times.
Wheels and Tires 4. Turn the hazard flashers on then off Remove the valve cap from the valve three times. You must accomplish this stem on the left outer rear tire. within 10 seconds. If you successfully Decrease the air pressure until the enter the reset mode, the horn sounds horn sounds.
Page 223
Comfort and noise. • and wheels that were originally provided Ground clearance and parking at curbs. • by Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather Winter weather driving capability. • than repaired.
Page 224
Wheels and Tires Tire Change Procedure 3. Full-size dissimilar spare without (If Equipped) label on wheel When driving with the full-size dissimilar WARNING: The jack supplied with spare wheel and tire assembly: this vehicle is only intended for changing Do not exceed 70 mph (113 km/h). •...
Page 225
Wheels and Tires Note: No maintenance or additional lubrication of your jack is required over the WARNING: Never place anything service life of your vehicle. between the vehicle jack and your vehicle. Park the vehicle on a level firm ground and activate the hazard flashers.
Page 226
Wheels and Tires E308882 Jacking the Vehicle Position the jack under the correct jacking E366770 points according to following pictures. 5. Use the wheel nut wrench to remove the wheel trim, if equipped. 6. Loosen each wheel nut one-half turn counterclockwise.
Page 227
Wheels and Tires E162819 E201346 Rear axle jacking points: All models except Turn the jack handle clockwise. For E-350 and E-450 dual rear wheel. hydraulic jacks, operate the handle up-and-down until the wheel is completely off the ground and high enough to install the spare tire.
Page 228
Wheels and Tires Stowing the Flat tire or Spare tire Place the tire on end with the valve stem facing toward the front of the vehicle. Lay the tire on the ground, near the rear of the vehicle, with the valve stem side facing up.
9/16 x 18 two-piece lug nut 140 lb.ft (190 Nm) Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. On vehicles equipped with single rear wheels, retighten the lug nuts to the specified torque at 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
Capacities and Specifications MOTORCRAFT PARTS - 7.3L Component Motorcraft Part number Air filter element. FA-2042 One battery. BXT-65-750 Two batteries (optional). BXT-65-750 FL-820-S Engine oil filter. Spark plug. SP-589 Transmission fluid filter. FT-187 Windshield wiper blade. WW-2005 If a Motorcraft oil filter is not available, use an oil filter that aligns to SAE/USCAR Performance Specifications.
Capacities and Specifications North America and an “E” for Europe to BULB SPECIFICATION CHART ensure lamp performance, light brightness and pattern and safe visibility. The correct Replacement bulbs are specified in the bulbs will not damage the lamp assembly chart below. Headlamp bulbs must be or void the lamp assembly warranty and marked with an authorized “D.O.T.”...
Capacities and Specifications ENGINE OIL CAPACITY AND SPECIFICATION Use oil that meets the defined specification and viscosity grade. If you do not use oil that meets the defined specification and viscosity grade, it could result in: Component damage that your vehicle •...
Capacities and Specifications Alternative Engine Oil for we recommend that you use the following Extremely Cold Climates alternative engine oil in extremely cold climates, where the ambient temperature To improve engine cold start performance, reaches -22°F (-30°C) or below. Materials Name Specification Engine Oil - SAE 0W-30...
Capacities and Specifications AIR CONDITIONING SYSTEM the air conditioning refrigerant system CAPACITY AND can cause personal injury. SPECIFICATION Use refrigerant and oil that meets the defined specifications. If you do not use refrigerant and oil that WARNING: The air conditioning meets the defined specifications, it could refrigerant system contains refrigerant result in:...
Capacities and Specifications Materials Name Specification Motorcraft® Premium Windshield Wash Concen- WSS-M14P19-A trate with Bitterant(U.S.) Motorcraft® Premium Quality Windshield Washer Fluid -35 °C / Liquide lave-glace de haute qualité - 35 °C Motorcraft®(Canada) ZC-32-B2(U.S.) CXC-37-M(Canada) If you do not use fluid that meets the defined specification and viscosity grade, AUTOMATIC TRANSMISSION it could result in:...
Capacities and Specifications If you do not use fluid that meets the BRAKE FLUID SPECIFICATION defined specification, it could result in: Use fluid that meets the defined Component damage that your vehicle • specification. warranty does not cover. Reduced brake performance. •...
Capacities and Specifications Capacities Variant Quantity E-350 Dana axle M70FF (M267FF). 3.28 qt (3.1 L) E-450 Dana axle M70HD (M273HD). 4.86 qt (4.6 L) Fill Dana rear axles to 0.24 0.55 in (6 14 mm) below the bottom of the fill hole. Materials Name Specification...
Page 240
Capacities and Specifications Materials Name Specification Motorcraft® MERCON® LV Automatic Transmission WSS-M2C938-A Fluid(U.S.) Motorcraft® MERCON® LV Automatic Transmission Fluid / Huile pour boîte automatique MERCON® LV Motorcraft®(Canada) XT-10-QLVC(U.S.) CXT-10-LV6(Canada) 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Vehicle Identification VEHICLE IDENTIFICATION NUMBER LOCATING THE VEHICLE IDENTIFICATION NUMBER The vehicle identification number is on the left-hand side of the instrument panel. E142477 World manufacturer identifier. Brake system, gross vehicle weight rating, restraint devices and their locations. Make, vehicle line, series, body type.
CONNECTING FORDPASS TO THE Some remote features require additional MODEM service activation. Log in to your Ford account for details. Some restrictions, third Make sure that the modem is enabled party terms and message or data rates using the vehicle settings menu.
Audio System (If Equipped) GENERAL INFORMATION hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws WARNING: Driving while distracted that may affect the use of electronic can result in loss of vehicle control, crash devices while driving.
Page 244
Audio System (If Equipped) Accessing the Sound Settings Note: You can change between auto or manual tuning with the rotary control using Press the button to adjust the the system settings. sound settings. You can also Note: You can change radio stations using E280315 activate and set the sensitivity the seek buttons.
Page 245
Audio System (If Equipped) Selecting a Menu Option Switching the Audio Unit On and E260781 E260686 Selecting the Radio Press and release the button. Press the button to select radio Using a Cell Phone mode. Press the button to either Press the button again to display answer an incoming phone call the available radio sources.
Audio System (If Equipped) In satellite radio mode, press and release Press the button once to return to select the next or previous satellite radio to the beginning of the track. station. If you select a specific category, Repeatedly press the button to such as jazz, rock or news, press to find the return to previous tracks.
Audio System (If Equipped) Sorting by Categories USING VOICE RECOGNITION You can also sort and play music by Phone Voice Service specific categories, for example artist or album. This system allows you to use the voice recognition features of your phone and Press the OK button to view the available focus on your driving.
Ford Licensed Accessories, and specifically for automotive use. does not design or test these accessories If you or an authorized Ford dealer add • to Ford Motor Company engineering any non-Ford electrical or electronic requirements. Contact an authorized Ford accessories or components to your dealer for the manufacturer’s limited...
The power leads are coded as follows: specifically for automotive use. If you or an authorized Ford dealer add • any non-Ford electrical or electronic accessories or components to your vehicle, you may adversely affect battery performance and durability.
Page 250
Trace AUX 4 CAC08 Brown Learn more about auxiliary switches by visiting https://www.fleet.ford.com/truckbbas/. Upfitter Interface Module (If Equipped) The Upfitter Interface Module (UIM) is an electronic control module that operates equipment (such as lift buckets, cranes, motors, salt spreaders and snow plows) with external relays.
If you bring your car into your dealer for Vehicle Limited Warranty coverage. When service, we’ll give you a loaner to use for you visit your Ford Dealer, Insist on Ford the day. Protect extended service plans! Extended Rental Benefits...
Page 252
To learn This information is subject to change. For more, call our Ford Protect extended more information; visit your local Ford of service plan specialists at 800-367-3377. Canada dealer or www.ford.ca to find the...
If you do not use Ford authorized parts they you sell or trade it. Keep all receipts for may not meet our specifications and completed maintenance with your vehicle.
Page 254
Ford, Motorcraft or as that required to fill and operate the Ford-authorized re-manufactured system or using a Ford-approved flushing replacement parts engineered for your chemical. vehicle. Owner Checks and Services...
Page 255
Scheduled Maintenance Check every six months Battery connections. Clean if necessary. Body and door drain holes for obstructions. Clean if necessary. Cooling system fluid level and coolant strength. Door weatherstrips for wear. Lubricate if necessary. Hinges, latches and outside locks for proper operation. Lubricate if necessary. Parking brake for proper operation.
Scheduled Maintenance Multi-point inspection Windshield for cracks, chips or pits Fluid levels ; fill if necessary For oil and fluid leaks Washer spray and wiper operation Brake, coolant recovery reservoir, automatic transmission, power steering and window washer. If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration Use By date on the canister.
Page 257
Scheduled Maintenance Maintenance Inspect the automatic transmission fluid level. Consult dealer for require- ments. Inspect the brake pads, rotors, hoses and parking brake. Every 15,000 mi Inspect the engine cooling system strength and hoses. (24,000 km) Inspect the exhaust system and heat shields. Inspect the steering linkage, ball joints, suspension, tie-rod ends, driveshaft and the U-joints.
Page 258
Scheduled Maintenance Other Maintenance Items Replace the front wheel bearings and seals, if you use non- sealed bearings. Every 200,000 mi Change the engine coolant. (320,000 km) If not replaced, inspect every 15,000 mi (24,000 km). Initial replacement at ten years or 200,000 mi (320,000 km), then every five years or 100,000 mi (160,000 km).
Scheduled Maintenance perform extra maintenance as indicated. SPECIAL OPERATING If you operate your vehicle occasionally CONDITIONS SCHEDULED under any of these conditions, it is not MAINTENANCE necessary to perform the extra maintenance. For specific If you operate your vehicle primarily in any recommendations, see your dealership of the following conditions, you need to service advisor or technician.
Page 260
Scheduled Maintenance Operating in Dusty or Sandy Conditions (Such as Unpaved or Dusty Roads) Inspect frequently, service Replace engine air filter. as required Every 5,000 mi (8,000 km) Inspect the wheels and related components for abnormal noise, wear, looseness or drag. Rotate the tires , inspect tires for wear and measure the tread depth.
Page 261
Scheduled Maintenance If the available API SM or SN oils are not available, then the oil change interval is 3,000 mi (4,800 km). Engine air filter replacement: The life of the engine air filter is dependent on exposure to dusty and dirty conditions. Vehicles operated in these conditions require frequent inspection and replacement of the engine air filter.
Customer Information RADIO FREQUENCY CERTIFICATION LABELS CRUISE CONTROL MODULE Device Supplier Type Designation Mid Range Radar (MRR) Delphi/Aptiv L2C0065TR European Union EU Argentina E310043 E308030 Ghana Brazil E340118 Djibouti E340191 E342394 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 263
Customer Information Indonesia HIDF16000009 Mauritania E342395 Israel E340190 Moldova E402791 Jamaica E337971 Morocco E340518 Malaysia E340192 E269697 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 264
Customer Information Pakistan Singapore E342396 E340193 Paraguay South Africa E308039 E340194 Serbia South Korea E308040 E339675 R-CMM-DLH-L2C0065TR 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 265
Customer Information Syria United Arab Emirates E342397 Taiwan, China E308044 United Kingdom E362840 E340195 Ukraine United States and Canada WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
Page 266
Customer Information China This device complies with Part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Page 267
Customer Information European Union (EU) E310043 The RED 2014/53/EU (replacing R&TTE Directive 1999/5/EC on 13 June 2016) explicitly states that instructions for intentional radiators include reference to "(a) frequency band(s) in which the radio equipment operates; and (b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates,"...
Page 268
Customer Information Israel Nigeria E382725 Jamaica E337972 This product has been Type Approved by Oman Jamaica: SMA - FP4. Mauritania E337973 Pakistan E337970 Moldova E337974 E337971 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 269
Customer Information Paraguay South Korea E338023 Ukraine E338018 Serbia E269682 Unites Arab Emirates (U.A.E.) TRA REGISTERED No: ER12204/22 E338019 DEALER No: Sierra Leone DA37380/15 United Kingdom E362840 E382724 TAN: 2016-002-0035 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 270
Customer Information United States and Canada CNC ID: H-28035 WARNING: Changes or Brazil modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
Page 271
Customer Information The RED 2014/53/EU (replacing R&TTE Directive 1999/5/EC on 13 June 2016) explicitly states that instructions for intentional radiators include reference to "(a) frequency band(s) in which the radio equipment operates; and (b) maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates," in addition to carrying over the general operational instruction and Declaration of Conformity inclusion requirements from the R&TTE Directive.
Page 272
Customer Information Mexico NR: 2022-05-I-0000331 IFT: RLVSCBG22-2502 Serbia Moldova E337971 Morocco E392454 AGREE PAR L'ANRT MAROC Singapore Numéro d'agrément: MR00034968ANRT2022 Complies with IMDA Standards Date d'agrément: 21/12/2022 DA 00461 Paraguay South Africa E396860 E339812 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 273
Customer Information South Korea Ukraine E269682 E339675 Unites Arab Emirates (U.A.E.) MSIP-R-C-SRD-BG2BP4 TRA REGISTERED No: Taiwan ER10488/22 CCAB22LP0730T0 DEALER No: E373549 DA37380/15 Thailand United Kingdom E392562 E362840 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
New vehicle limited warranties. • assemblies. Where a warrantable condition Emissions warranties, if applicable. • exists, Ford Motor Company will repair your (Note: Fully-electric vehicles are not vehicle at no cost to you including eligible for emissions warranties.) diagnosis, parts and labor.
Page 275
- You are responsible for presenting your vehicle to a Ford or Lincoln dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.
Appendices Note: We test and certify your vehicle to ELECTROMAGNETIC meet electromagnetic compatibility COMPATIBILITY legislation. It is your responsibility to make sure that any equipment an authorized dealer installs on your vehicle complies with applicable local legislation and other WARNING: Do not place objects requirements.
Page 277
Appendices E239122 Truck E239121 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 278
Appendices Frequency Band Maximum Output Power Watt Antenna Positions (Peak RMS) 1-30 50-54 2, 3 68-88 2, 3 142-176 2, 3 380-512 2, 3 806-870 2, 3 2025 E-Series (TE4) Canada/United States of America, enUSA, Edition date: 202310, First-Printing...
Page 279
Index Battery See: Climate Control...........74 See: Changing the 12V Battery.......174 About This Manual...........7 Bonnet Lock See: Opening and Closing the Hood...162 Booster Seats...........27 See: Brakes.............98 ABS driving hints Brake Fluid Check..........173 Brake Fluid Specification......234 See: Hints on Driving With Anti-Lock Brakes..............98 Brakes..............99 Accessories............244...
Page 280
Customer Information.......258 Fastening the Seatbelts.......32 Flat Tire Radio Frequency Certification Labels..............258 See: Changing a Road Wheel......218 Floor Mats............137 Ford Credit............7 Ford Protect...........247 Data Privacy............14 Fuel and Refueling........86 Daytime Running Lamps - Vehicles With: Fuel Consumption.........89 Configurable Daytime Running Fuel Filter............178 Lamps..............53...
Page 281
Index Gearbox Instrument Lighting Dimmer.....53 Instrument Panel..........19 See: Transmission..........94 General Information on Radio Interior Mirror...........58 Frequencies...........43 Introduction............7 General Maintenance Information..249 Getting Assistance Outside the U.S. and Canada............148 Getting the Services You Need....145 Jump Starting the Vehicle......139 Handbrake Keys and Remote Controls......43 See: Parking Brake..........99 Hazard Flashers..........139 Headlamp Adjusting...
Page 282
Index Opening and Closing the Hood....162 Replacing a Lost Key or Remote Ordering Additional Owner's Control............45 Literature............149 Reporting Safety Defects (Canada Overriding Automatic High Beam Only)..............150 Control............56 Reporting Safety Defects (U.S. Only)...............149 Resuming the Set Speed......106 Roadside Assistance........142 Parking Aids...........104 Roadside Emergencies.......139 Parking Brake..........99 Running-In...
Page 283
Index Sun Visors............58 Vehicle Identification........237 Supplementary Restraints System..36 Vehicle Identification Number.......237 Vehicle Storage..........187 Principle of Operation........36 Switching Automatic High Beam Control Ventilation On and Off.............55 See: Climate Control...........74 Switching Cruise Control On and Off..............105 Symbols Glossary..........11 Symbols Used on Your Vehicle....11 Warning Lamps and Indicators....62 Warranty Information.........270 Washer Fluid Check........178...
Need help?
Do you have a question about the E-SERIES 2025 and is the answer not in the manual?
Questions and answers