Creative Playthings Yorktown Quick Start Manual

SPECIAL NOTES AND INSTRUCTIONS:
If the Yorktown Play Floor is to be used, install the
Play Floor Before installing the Play Walls. See the
owner's manual for the Yorktown gym for additional
safety information.
All hardware on this set is specially
coated for corrosion resistance. If non-
Creative Playthings hardware is used, it
must be galvanized or stainless steel.
STEP ONE - Long Support
Fasten the Long Wall Support (A) to the short porch posts of
the Yorktown gym using two 5/16 x 2-1/2" Lag Screws and two
Flat Washers, as shown at right. Use the pilot holes 24" up from
the bottom of the posts.
Page 1 Page 1
Yorktown Porch Play Walls
Parts:
63064-101
A 1 31465-102 Long Wall Supp 2 x 4 x 83-1/4"
B 14 31936-102 Wall Slat 5/4 x 6 x 20"
C 1 33458-102 End Wall Support 2 x 4 x 44"
50492-700
4 12002-206 Flat Washer 5/16"
1 12017-206 Lock Washer 5/16"
61 17020-115 Screw #10 x 1-5/8"
1 17001-105 Weld Nut 5/16"
1 17003-611 Hex Bolt 5/16 x 1-1/2"
4 17036-1002 Lag Screw 5/16 x 2-1/2"
4 15081-704 1" Hole Cap, Brown
1 14161-400 Access Bracket
5/16" Weld
5/16" Flat
Washer
5/16" Lock
Access Bracket
Washer
(Not to Scale)
Yorktown Play Walls - 19796-100F (05/20)
Copyright 2011, Creative Playthings - Printed in U.S.A.
Yorktown Play Walls
Hardware Yorktown Play Walls
Hole Cap
Nut
#10 x 1-5/8" Screw
5/16 x 1-1/2" Hex Bolt
5/16 x 2-1/2" Hex Bolt