Installation; Items Included; Computer Requirements; Driver Installation - ELNA XCHANGE Instruction Manual

Xchange Multi-Access Converter

INSTALLATION

INCLUDED WITH XCHANGE:
1 Xchange Box
1 SmartMedia Card
1 Instruction manual
1 Xchange Box Software on CD-ROM - includes Color Editor
1 USB Cable

COMPUTER REQUIREMENTS

Pentium II Processor
16 MB RAM
5MB hard drive space
Windows 98 or above
CD-ROM Drive
Display 800 X 600 or better
Mouse
USB Port

DRIVER INSTALLATION

1. Turn computer OFF.
2. Plug flat end of USB cable into USB port, found in the front, back or side of your
computer.
3. Plug square end of your USB cable into the back of your Xchange Box.
4. Turn computer ON.
5. The screen displays "New Hardware Found." Insert your installation CD into the drive
and click Next.
6. Click "Search for suitable driver" and click Next.
7. Select only "CD-ROM drives" and click Next.
8. After Windows has found the driver, click Next to start the installation process.
9. Finally, select Finish. Your driver installation is completed, and you are ready to
install your Xchange Box software.
6